|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Automatic fax printing....!?!
> I have a doubt about faxrcvd. Do I get a email notification when a fax
> is recieved? If yes then I don't get one!
>
> My fax/log has a file with fax recieved information;
>
> SESSION BEGIN 00000002 +49.40.77291010
> Incoming analog call on controller 1 from 00407729100 to 50.
> Connection established.
> StationID = +49 40 77291010
> BaudRate = 9600
> Flags = MMR_compr
> Write fax in path /var/spool/fax to file recvq/fax00001.tif.
> Page 1 was received. - Last Page!
> Fax received and calling '/var/spool/fax/bin/faxrcvd
> "recvq/fax00001.tif" "faxCAPI" "00000002" "" "+49 40 77291010" "" "50"'.
> Connection is droped with reason 0x3400 (No additional information).
> SESSION END
faxrcvd is called with 7 parameters. This is the case since version 4.1.3.
>
> My faxrcvd script looks like this ( where i've included a line
> /usr/bin/tiff2ps -a $FILE | /usr/bin/lpr -P Verkauf to print the
> incoming fax)
>
> #! /bin/sh
> # $Id: faxrcvd.sh.in,v 1.1 2001/04/15 03:48:16 darren Exp $
> #
> # faxrcvd file devID commID error-msg destination
> #
> if [ $# -lt 5 ]; then
> echo "Usage: $0 file devID commID error-msg destination"
> exit 1
> fi
Your faxrcvd-script just demands 5 parameters!
You have a version conflict.
>
> test -f etc/setup.cache || {
> SPOOL=`pwd`
> cat<<EOF
>
> FATAL ERROR: $SPOOL/etc/setup.cache is missing!
>
> The file $SPOOL/etc/setup.cache is not present. This
> probably means the machine has not been setup using the faxsetup(8C)
> command. Read the documentation on setting up HylaFAX before you
> startup a server system.
>
> EOF
> exit 1
> }
> . etc/setup.cache
>
> INFO=$SBIN/faxinfo
> FAX2PS=$TIFFBIN/fax2ps
> TOADDR=FaxMaster
> #
> # There is no good portable way to find out the fully qualified
> # domain name (FQDN) of the host or the TCP port for the hylafax
> # service so we fudge here. Folks may want to tailor this to
> # their needs; e.g. add a domain or use localhost so the loopback
> # interface is used.
> #
> HOSTNAME=`hostname` # XXX no good way to find FQDN
> PORT=4559 # XXX no good way to lookup service
>
> FILE="$1"
> DEVICE="$2"
> COMMID="$3"
> MSG="$4"
>
> if [ -f $FILE ]; then
> #
> # Check the sender's TSI and setup to dispatch
> # facsimile received from well-known senders.
> #
> SENDER="`$INFO $FILE | $AWK -F: '/Sender/ { print $2 }'
> 2>/dev/null`"
> SENDTO=
> if [ -f bin/FaxDispatch ]; then
> . bin/FaxDispatch # NB: FaxDispatch sets SENDTO based on $5
> fi
> (echo "To: $TOADDR"
> echo "From: The HylaFAX Receive Agent <fax>"
> echo "Subject: facsimile received from $SENDER";
> echo ""
> echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
> echo "ReceivedOn: $DEVICE"
> if [ "$MSG" ]; then
> echo ""
> echo "The full document was not received because:"
> echo ""
> echo " $MSG"
> echo ""
> echo " ---- Transcript of session follows ----"
> echo ""
> if [ -f log/c$COMMID ]; then
> $SED -e '/-- data/d' \
> -e '/start.*timer/d' -e '/stop.*timer/d' \
> log/c$COMMID
> elif [ -n "$COMMID" ]; then
> echo " No transcript available (CommID c$COMMID)."
> else
> echo " No transcript available."
> fi
> else
> echo "CommID: c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
> fi
> if [ -n "$SENDTO" ]; then
> echo ""
> echo "The facsimile was automatically dispatched to: $SENDTO."
> else
> /usr/bin/tiff2ps -a $FILE | /usr/bin/lpr -P Verkauf
> fi
> ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
> if [ -n "$SENDTO" ]; then
> (MIMEBOUNDARY="NextPart$$"
> echo "Mime-Version: 1.0"
> echo "Content-Type: Multipart/Mixed; Boundary=\"$MIMEBOUNDARY\""
> echo "Content-Transfer-Encoding: 7bit"
> echo "To: $SENDTO"
> echo "From: The HylaFAX Receive Agent <fax>"
> echo "Subject: facsimile received from $SENDER";
> echo ""
> echo "--$MIMEBOUNDARY"
> echo "Content-Type: text/plain; charset=us-ascii"
> echo "Content-Transfer-Encoding: 7bit"
> echo ""
> echo "$FILE (ftp://$HOSTNAME:$PORT/$FILE):"; $INFO -n $FILE
> echo "ReceivedOn: $DEVICE"
> if [ "$MSG" ]; then
> echo ""
> echo "The full document was not received because:"
> echo ""
> echo " $MSG"
> echo ""
> echo " ---- Transcript of session follows ----"
> echo ""
> if [ -f log/c$COMMID ]; then
> $SED -e '/-- data/d' \
> -e '/start.*timer/d' -e '/stop.*timer/d' \
> log/c$COMMID
> elif [ -n "$COMMID" ]; then
> echo " No transcript available (CommID c$COMMID)."
> else
> echo " No transcript available."
> fi
> else
> echo "CommID: c$COMMID (ftp://$HOSTNAME:$PORT/log/c$COMMID)"
> fi
> echo ""
> echo "--$MIMEBOUNDARY"
> echo "Content-Type: application/postscript"
> echo "Content-Description: FAX document"
> echo "Content-Transfer-Encoding: 7bit"
> echo ""
> $FAX2PS $FILE 2>/dev/null
> echo ""
> echo "--$MIMEBOUNDARY--"
> ) | 2>&1 $SENDMAIL -ffax -oi $SENDTO
> fi
> else
> #
> # Generate notification mail for a failed attempt.
> #
> (echo "To: $TOADDR"
> echo "From: The HylaFAX Receive Agent <fax>"
> echo "Subject: facsimile not received"
> echo ""
> echo "An attempt to receive facsimile on $DEVICE failed because:"
> echo ""
> echo " $MSG"
> echo ""
> echo " ---- Transcript of session follows ----"
> echo ""
> if [ -f log/c$COMMID ]; then
> $SED -e '/-- data/d' \
> -e '/start.*timer/d' -e '/stop.*timer/d' \
> log/c$COMMID
> elif [ -n "$COMMID" ]; then
> echo " No transcript available (CommID c$COMMID)."
> else
> echo " No transcript available."
> fi
> ) | 2>&1 $SENDMAIL -ffax -oi $TOADDR
> fi
>
> Even after that i don't get any fax printer to this printer. Then I
> tried the FaxDispatch script as told in reply to my mail;
>
> #! /bin/sh
> # Dispatch fax to email depending on own MSN or extention (ISDN lines)
> # sourced from faxrcvd
> #
> if [ "$5" != "" ]; then
> PHONEMATCH=$5\$
use $7 here.
> USERENTRY=`grep -v "^#" etc/users | grep "$PHONEMATCH"`
> if [ "$USERENTRY" != "" ]; then
> USERNAME=`echo $USERENTRY | awk '{print $1}'`
> SENDTO="$USERNAME"
> fi
> fi
> # Dispatch fax to the shared network printer
> case "$DEVICE" in
> faxCAPI) /usr/bin/tiff2ps -a $FILE | lpr -PVerkauf
Is it a postscript printer?
> esac
>
> Still I'm no success :( Neither i'm getting a notification mail for the
> incoming faxes. Do i miss something here? any suggession are highly
> appreciated
>
--
holger
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
