[hylafax-users] Connection was dropped with Reason 0x3315

To: hylafax-users@hylafax.org
Subject: [hylafax-users] Connection was dropped with Reason 0x3315
From: Wolfgang Pichler <madmin@dialog-telekom.at>
Date: 16 May 2003 09:14:18 +0000

hi all,

after solving my problem with changing the outgoing number (thanx to
Shafeer Hajamohideen), i am now stuck with the next problem. Sending a
fax to the first number works fine (at the end i get an "Connection
dropped with Reason 0x3400" - but it works) - below are the log entries.
But we also have another fax - sending a fax to this number wont work.
It starts sending - the other fax responds - starts to print out the
fax, but after a while it stops (at the half of the page) to print it
out and i get the error "Connection was dropped with Reason 0x3315".
Could it be that ECM produces this error ? Can i turn ECM off ? How ?
Any other ideas what could cause this error ?

some infos about my hard/software - and logs

software:
--------------
hylafax 4.1.5
suse 7.2
AVM Fritz Card - kernel modules from the Fritz Card site
capi4hylafax-01.02.02
fcpci-suse7.2-03.09.10
-------------

capiinfo:
---------------
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.09-10  (48.154)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
   internal controller supported
   DTMF supported
   Supplementary Services supported
   channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
   64 kbit/s with HDLC framing
   64 kbit/s bit-transparent operation
   V.110 asynconous operation with start/stop byte framing
   V.110 synconous operation with HDLC framing
   T.30 modem for fax group 3
   Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
   ISO 7776 (X.75 SLP)
   Transparent
   LAPD with Q.921 for D channel X.25 (SAPI 16)
   T.30 fro fax group 3
   ISO 7776 (X.75 SLP) with V.42bis compression
   V.120 asyncronous mode
   V.120 bit-transparent mode
B3 protocols support: 0x800000bf
   Transparent
   T.90NL, T.70NL, T.90
   ISO 8208 (X.25 DTE-DTE)
   X.25 DCE
   T.30 for fax group 3
   reserved
 
  0100
  0200
  39000000
  1f010040
  1b0b0000
  bf000080
  00000000 00000000 00000000 00000000 00000000 00000000
  01000001 00020000 00000000 00000000 00000000
 
Supplementary services support: 0x000003ff
   Hold / Retrieve
   Terminal Portability
   ECT
   3PTY
   Call Forwarding
   Call Deflection
   MCID
   CCBS
---------- 

log when it works:
---------------
May 16 09:48:14.96: [14907]: CapiFaxSend - INFO: SESSION BEGIN 00000029
07066277451
May 16 09:48:14.96: [14907]: CapiFaxSend - INFO: FAX FAX: JOB 29 DEST
07066277422 COMMID 00000037
May 16 09:48:14.96: [14907]: CapiFaxSend - INFO: Try to connect to fax
number 07066277422 in Hylafax mode on controller 1.
May 16 09:48:14.96: [14907]: CapiFaxSend - INFO: Dial and starting
transfer of TIFF-File docq/doc29.cover;01 with fine resolution.
May 16 09:48:29.40: [14914]: CapiFaxSend - INFO: Connection established.
May 16 09:48:29.40: [14914]: CapiFaxSend - INFO:        StationID = 0732
662774 22
May 16 09:48:29.40: [14914]: CapiFaxSend - INFO:        BaudRate  = 9600
May 16 09:48:29.40: [14914]: CapiFaxSend - INFO:        Flags     =
HighRes, MR_compr, MMR_compr
May 16 09:48:37.90: [14914]: CapiFaxSend - INFO: Page 1 was sended.
May 16 09:48:37.90: [14914]: CapiFaxSend - INFO: Start transfer of
TIFF-File docq/doc48.ps;01 with fine resolution.
May 16 09:49:25.23: [14914]: CapiFaxSend - INFO: Page 2 was sended.
May 16 09:50:03.00: [14914]: CapiFaxSend - INFO: Page 3 was sended. -
Last Page!
May 16 09:25:48.58: [14775]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:26:05.32: [14775]: CapiFaxSend - INFO: Connection dropped with
Reason 0x3400 (No additional information).
------------

log when it fails
------------
May 16 09:16:06.98: [14722]: CapiFaxSend - INFO: SESSION BEGIN 00000027
07066277451
May 16 09:16:06.98: [14722]: CapiFaxSend - INFO: FAX FAX: JOB 27 DEST
07066277444 COMMID 00000035
May 16 09:16:06.98: [14722]: CapiFaxSend - INFO: Try to connect to fax
number 07066277444 in Hylafax mode on controller 1.
May 16 09:16:06.98: [14722]: CapiFaxSend - INFO: Dial and starting
transfer of TIFF-File docq/doc27.cover;01 with fine resolution.
May 16 09:16:22.57: [14729]: CapiFaxSend - INFO: Connection established.
May 16 09:16:22.57: [14729]: CapiFaxSend - INFO:        StationID =
073266277444
May 16 09:16:22.57: [14729]: CapiFaxSend - INFO:        BaudRate  =
14400
May 16 09:16:22.57: [14729]: CapiFaxSend - INFO:        Flags     =
HighRes, MR_compr, MMR_compr
May 16 09:16:31.08: [14729]: CapiFaxSend - INFO: Page 1 was sended.
May 16 09:16:31.08: [14729]: CapiFaxSend - INFO: Start transfer of
TIFF-File docq/doc44.ps;01 with fine resolution.
May 16 09:17:03.74: [14729]: CapiFaxSend - INFO: Page 2 was sended.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Page 3 was sended. -
Last Page!
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Fax file completely
transfered to CAPI.
May 16 09:17:29.46: [14729]: CapiFaxSend - ERROR: Only 1 from 3 pages
are transfered!
May 16 09:17:29.46: [14729]: CapiFaxSend - INFO: Connection was dropped
with Reason 0x3315 (Disconnected during transfer (remote procedure
error, e.g. unsuccessful repetition of T.30 commands)) before Fax was
completely transfered.
May 16 09:17:29.67: [14729]: CapiFaxSend - INFO: Connection dropped with
Reason 0x3400 (No additional information).
------------





____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*

Prev by Date: Re: [hylafax-users] Problem with hylafax " No response to EOP "
Next by Date: [hylafax-users] WHFC Eror-Messages Filesystem has SysV-style file creation semantics.
Previous by thread: [hylafax-users] The modem won't dial
Next by thread: [hylafax-users] WHFC Eror-Messages Filesystem has SysV-style file creation semantics.
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services