Re: [hylafax-users] problems receiving with conexant modems

[Razvan Cosma <razvan.cosma@telemach.com>]

Some update: I also tried disabling adaptive answer, no change.
And checking with several friend with different fax machine types and located 
in different cities turns out an 80% failure ratio, always with the 
"Ring detected without successful handshake" message. Not a very good 
percentage, is it? ;)
I can SEND to them all, though, and receive from them all if I plug in a 
regular fax machine.
The config file:

CountryCode:            40
AreaCode:               21
FAXNumber:              +4021234567
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0664
LogFileMode:            0644
DeviceMode:             0660
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
PercentGoodLines:       0
MaxConsecutiveBadLines: 0
MaxRecvPages:           10
ModemType:              Class2         
ModemRate:              19200
ModemFlowControl:       rtscts          # have tried also xonxoff
ModemWaitForConnect:    yes
ModemNoFlowCmd:         AT&K             
ModemHardFlowCmd:       AT&K3          
ModemSoftFlowCmd:       AT&K4          
ModemSetupDTRCmd:       AT&D3          
ModemSetupDCDCmd:       AT&C1          
ModemSetupAACmd:        AT+FCLASS=0;+FAA=0 

ModemSendFillOrder:     LSB2MSB         # as expected
ModemRecvFillOrder:     MSB2LSB         # opposite of what makes sense
Class2RecvDataTrigger:  "\022"          # a la 2388-B



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*