Re: [hylafax-users] fax / data recognition

["cheng chung yan" <chungyan5@hkem.com>]

i still cannot success in receiving both fax / data connections. I just can
receive one of them. I did it by this way.
* uninstall the old hylafax, remove all old configuration files
* install new one by rpm
* then i edit the faxsetup, changed "PATH_GETTY=/sbin/mgetty" to "PATH_GETTY=/sbin/agetty" inside /usr/sbin/faxsetup
* then ran faxsetup and answered all questions
* "GettyArgs:              "-h - %s xterm" " inside /var/spool/hylafax/etc/config.ttyS0
* adding following into /var/spool/hylafax/etc/config.ttyS0
"
#
# inbound for fax and data
#
AdaptiveAnswer:         yes             # enable adaptive answer
AnswerRotary:           "fax data"      # answer for fax, then data
ModemAnswerCmd:         AT+FCLASS=1;A   # default is to answer as fax
ModemAnswerDataCmd:     ATH+FCLASS=0;A  # hangup and answer as data
Class1RecvIdentTimer:   10000           # timeout fax answer in 10 secs
#FaxT1Timer:            7000
"
* add following into /etc/inittab
"
# Fax and Modem Server
mo:2345:respawn:/usr/sbin/faxgetty ttyS0
"
* then run a command "init q" and "service hylafax restart"
* i tested fax function by another computer and phone line, as well it runs hylafax by following
"
sendfax -n -d XXXXXXXX <<EOF
> any test 1
> EOF
request id is 7 (group id 7) for host localhost (1 file)
"
it works.
* i used minicom by previous computer and phone line, just dial by atdtXXXXXXXX, log file as 
"
Feb 24 21:23:51.57: [ 1943]: SESSION BEGIN 00000005 852027635318
Feb 24 21:23:51.57: [ 1943]: HylaFAX (tm) Version 4.1.5
Feb 24 21:23:51.57: [ 1943]: <-- [14:AT+FCLASS=1;A\r]
Feb 24 21:23:57.78: [ 1943]: --> [7:CONNECT]
Feb 24 21:23:57.78: [ 1943]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Feb 24 21:23:57.78: [ 1943]: RECV FAX: begin
Feb 24 21:23:57.78: [ 1943]: <-- data [23]
Feb 24 21:23:57.78: [ 1943]: <-- data [2]
Feb 24 21:23:59.46: [ 1943]: --> [7:CONNECT]
Feb 24 21:23:59.46: [ 1943]: <-- data [10]
Feb 24 21:23:59.46: [ 1943]: <-- data [2]
Feb 24 21:24:00.00: [ 1943]: --> [2:OK]
Feb 24 21:24:00.00: [ 1943]: <-- [9:AT+FRH=3\r]
Feb 24 21:24:03.10: [ 1943]: --> [0:]
Feb 24 21:24:03.10: [ 1943]: MODEM <Empty line>
Feb 24 21:24:03.10: [ 1943]: <-- data [1]
Feb 24 21:24:03.16: [ 1943]: --> [2:OK]
Feb 24 21:24:03.16: [ 1943]: DELAY 1500 ms
Feb 24 21:24:04.66: [ 1943]: <-- [9:AT+FTH=3\r]
Feb 24 21:24:04.70: [ 1943]: --> [7:CONNECT]
Feb 24 21:24:04.70: [ 1943]: <-- data [23]
Feb 24 21:24:04.70: [ 1943]: <-- data [2]
Feb 24 21:24:06.48: [ 1943]: --> [7:CONNECT]
Feb 24 21:24:06.48: [ 1943]: <-- data [10]
Feb 24 21:24:06.48: [ 1943]: <-- data [2]
Feb 24 21:24:07.02: [ 1943]: --> [2:OK]
Feb 24 21:24:07.02: [ 1943]: <-- [9:AT+FRH=3\r]
Feb 24 21:24:10.13: [ 1943]: --> [0:]
Feb 24 21:24:10.13: [ 1943]: MODEM <Empty line>
Feb 24 21:24:10.13: [ 1943]: <-- data [1]
Feb 24 21:24:10.18: [ 1943]: --> [2:OK]
Feb 24 21:24:10.18: [ 1943]: RECV FAX: No answer (T.30 T1 timeout)
Feb 24 21:24:10.18: [ 1943]: RECV FAX: end
Feb 24 21:24:10.18: [ 1943]: <-- [15:ATH+FCLASS=0;A\r]
Feb 24 21:25:21.19: [ 1943]: --> [10:NO CARRIER]
Feb 24 21:25:21.19: [ 1943]: ANSWER: Ring detected without successful
handshake
Feb 24 21:25:21.19: [ 1943]: SESSION END
"
* i changed AnswerRotary:           "fax data" to "AnswerRotary:           "data" " in /var/spool/hylafax/etc/config.ttyS0
* run "service hylafax restart" to restart the fax server again to import new configuration
* i use minicom to dial in again, but i got following response
"
atdt27635318
CONNECT 26400/V42BIS
mgetty: invalid option -- h

NO CARRIER
"
* could you please give me a indication again? It didn't change getty program from mgetty to agetty, how to change it? Or do my process has something wrong? Please Commant
thanks
yan


______________________________________________________
HKDict - the latest and easy to use Online Dictionary
http://www.hkdict.com



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*