Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Set-up on Mac OS X...
dumb, dumb, dumb....
[jake:~] admin% /usr/local/bin/faxstat -h 192.168.0.58
HylaFAX scheduler on xxxx.xxxx.xxx.local.: Running
Modem cu.modem (xxx.xxx.xxxx): Running and idle
I also successfully sent 2 test faxes (yahoo!!!) but I needed to
specify my actual IP address here on our lan for it to go.
Can some one tell how I configure either hylfax or my system so that I
do not need to do this locally?
Dan
On Friday, February 7, 2003, at 01:26 PM, Dan Tappin wrote:
> Hi Chris,
>
> I followed your instructions and patched the source file by hand. I
> ran sudo make install and I got a 'nothing to do' message.
>
> So I re-ran the ./config, make and sudo make install but I am still
> getting the syslog errors:
>
> [jake:~] admin% sudo /usr/local/sbin/hylafax stop
> Stopping HylaFAX Servers.
> [jake:~] admin% sudo /usr/local/sbin/hylafax start
> HylaFAX: faxq hfaxd (without old protocol & without SNPP support).
> [jake:~] admin% /usr/local/bin/faxstat
> Service not available, remote server closed connection
> [jake:~] admin%
>
> Feb 7 13:22:23 jake sudo: admin : TTY=ttyp2 ; PWD=/Users/admin ;
> USER=root ; COMMAND=/usr/local/sbin/hylafax stop
> Feb 7 13:22:25 jake FaxQueuer[222]: QUIT
> Feb 7 13:22:31 jake sudo: admin : TTY=ttyp2 ; PWD=/Users/admin ;
> USER=root ; COMMAND=/usr/local/sbin/hylafax start
> Feb 7 13:22:33 jake FaxQueuer[561]: HylaFAX (tm) Version 4.1.5
> Feb 7 13:22:33 jake FaxQueuer[561]: Copyright (c) 1990-1996 Sam
> Leffler
> Feb 7 13:22:33 jake FaxQueuer[561]: Copyright (c) 1991-1996 Silicon
> Graphics, Inc.
> Feb 7 13:22:33 jake FaxGetty[519]: HELLO
> Feb 7 13:22:33 jake HylaFAX[563]: HylaFAX INET Protocol Server:
> restarted.
> Feb 7 13:22:47 jake Assertion failed "Invalid Str[] index", file
> "../util/Str.h" line 117.
>
> Mmmmmm... this hurts my brain.
>
> Dan
>
> On Friday, February 7, 2003, at 12:52 PM, Chris Bainbridge wrote:
>
>> Dan,
>>
>> sudo make install
>>
>> is all. Stop and start hylafax to run new hfaxd program.
>>
>> Chris
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
> *To learn about commercial HylaFAX(tm) support, mail
> sales@hylafax.org.*
>
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*