Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

*****SPAM***** [hylafax-users] *****SPAM***** Re: Newbie - Modem Reset Problem (Re: *SPAM* ????? it isn't true)



SPAM: -------------------- Start SpamAssassin results ----------------------
SPAM: This mail is probably spam.  The original message has been altered
SPAM: so you can recognise or block similar unwanted mail in future.
SPAM: See http://spamassassin.org/tag/ for more details.
SPAM: 
SPAM: Content analysis details:   (6 hits, 5 required)
SPAM: SUBJ_HAS_Q_MARK    (0.7 points)  Subject: contains a question mark
SPAM: NO_REAL_NAME       (0.5 points)  From: does not include a real name
SPAM: DOUBLE_CAPSWORD    (1.1 points)  BODY: A word in all caps repeated on the line
SPAM: THIS_AINT_SPAM     (0.9 points)  BODY: Claims "This is not spam"
SPAM: PORN_11            (1.2 points)  BODY: Uses words and phrases which indicate porn (11)
SPAM: PORN_10            (0.6 points)  BODY: Uses words and phrases which indicate porn (10)
SPAM: UPPERCASE_50_75    (3.0 points)  BODY: message body is 50-75% uppercase
SPAM: RCVD_IN_OSIRUSOFT_COM (2.0 points)  RBL: Received via a relay in relays.osirusoft.com
SPAM:                    [RBL check: found 14.209.216.212.relays.osirusoft.com., type: 127.0.0.3]
SPAM: AWL                (-4.0 points) AWL: Auto-whitelist adjustment
SPAM: 
SPAM: -------------------- End of SpamAssassin results ---------------------

SPAM: -------------------- Start SpamAssassin results ----------------------
SPAM: This mail is probably spam.  The original message has been altered
SPAM: so you can recognise or block similar unwanted mail in future.
SPAM: See http://spamassassin.org/tag/ for more details.
SPAM: 
SPAM: Content analysis details:   (6 hits, 5 required)
SPAM: SUBJ_HAS_Q_MARK    (0.7 points)  Subject: contains a question mark
SPAM: NO_REAL_NAME       (0.5 points)  From: does not include a real name
SPAM: DOUBLE_CAPSWORD    (1.1 points)  BODY: A word in all caps repeated on the line
SPAM: THIS_AINT_SPAM     (0.9 points)  BODY: Claims "This is not spam"
SPAM: PORN_11            (1.2 points)  BODY: Uses words and phrases which indicate porn (11)
SPAM: PORN_10            (0.6 points)  BODY: Uses words and phrases which indicate porn (10)
SPAM: UPPERCASE_50_75    (3.0 points)  BODY: message body is 50-75% uppercase
SPAM: RCVD_IN_OSIRUSOFT_COM (2.0 points)  RBL: Received via a relay in relays.osirusoft.com
SPAM:                    [RBL check: found 14.209.216.212.relays.osirusoft.com., type: 127.0.0.3]
SPAM: AWL                (-4.0 points) AWL: Auto-whitelist adjustment
SPAM: 
SPAM: -------------------- End of SpamAssassin results ---------------------

WHY THE SERVER SAY MY MAIL IS SPAM
THIS IS NOT SPAM.
I AM REPLYING TO "Chad Meyer"
The following is my originale mail:

P.s.: I'm italian, sorry for my bad english.

>
> Hi, I had the same your problem and after a lot of time and I have
resolved
> it olnly a few days ago. Follow I transcribe my solution inserted in the
> mailing list 14th september 2002:
> Good work and if you have problems write me.
>
> Nico
>
>
>
>
> "
> After a lot of time I have finally found the true cause of this problem
and
> I've seen our Hylafax to work perfectly also on RedHat 7.3.  The kernel
> 2.4.18 given with RedHat 7.3 has a problem in serial ports management.
> To resolve this I've recompiled the kernel sources 2.4.19 (downloaded from
> www.kernel.org).
> If you need follow I transcribe the kernel configuration file used by me.
> This is
> only a trace, you will need to modify surely some parameters.
>
> Thanks for all your support.
> Nico
>
>
> Start of my kernel configuration file:
> #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> CONFIG_ISA=y
> # CONFIG_SBUS is not set
> CONFIG_UID16=y
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> # CONFIG_MODVERSIONS is not set
> CONFIG_KMOD=y
> #
> # Processor type and features
> #
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> CONFIG_M686=y
> # CONFIG_MPENTIUMIII is not set
> # CONFIG_MPENTIUM4 is not set
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MELAN is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_L1_CACHE_SHIFT=5
> CONFIG_X86_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_PGE=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_PPRO_FENCE=y
> CONFIG_X86_MCE=y
> # CONFIG_TOSHIBA is not set
> # CONFIG_I8K is not set
> # CONFIG_MICROCODE is not set
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
> CONFIG_NOHIGHMEM=y
> # CONFIG_HIGHMEM4G is not set
> # CONFIG_HIGHMEM64G is not set
> # CONFIG_MATH_EMULATION is not set
> # CONFIG_MTRR is not set
> # CONFIG_SMP is not set
> # CONFIG_X86_UP_APIC is not set
> #
> # General setup
> #
> CONFIG_NET=y
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_PCI_NAMES=y
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> # CONFIG_HOTPLUG is not set
> # CONFIG_PCMCIA is not set
> # CONFIG_HOTPLUG_PCI is not set
> CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> CONFIG_KCORE_ELF=y
> # CONFIG_KCORE_AOUT is not set
> CONFIG_BINFMT_AOUT=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
> # CONFIG_PM is not set
> # CONFIG_APM_IGNORE_USER_SUSPEND is not set
> # CONFIG_APM_DO_ENABLE is not set
> # CONFIG_APM_CPU_IDLE is not set
> # CONFIG_APM_DISPLAY_BLANK is not set
> # CONFIG_APM_RTC_IS_GMT is not set
> # CONFIG_APM_ALLOW_INTS is not set
> # CONFIG_APM_REAL_MODE_POWER_OFF is not set
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
> #
> # Parallel port support
> #
> CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> CONFIG_PARPORT_PC_CML1=m
> CONFIG_PARPORT_SERIAL=m
> CONFIG_PARPORT_PC_FIFO=y
> # CONFIG_PARPORT_PC_SUPERIO is not set
> # CONFIG_PARPORT_AMIGA is not set
> # CONFIG_PARPORT_MFC3 is not set
> # CONFIG_PARPORT_ATARI is not set
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_SUNBPP is not set
> # CONFIG_PARPORT_OTHER is not set
> CONFIG_PARPORT_1284=y
> #
> # Plug and Play configuration
> #
> CONFIG_PNP=y
> CONFIG_ISAPNP=m
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=m
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_UMEM is not set
> # CONFIG_BLK_DEV_LOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_RAM is not set
> #
> # Multi-device support (RAID and LVM)
> #
> CONFIG_MD=y
> CONFIG_BLK_DEV_MD=m
> CONFIG_MD_LINEAR=m
> CONFIG_MD_RAID0=m
> CONFIG_MD_RAID1=m
> CONFIG_MD_RAID5=m
> CONFIG_MD_MULTIPATH=m
> CONFIG_BLK_DEV_LVM=m
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> # CONFIG_NETLINK_DEV is not set
> # CONFIG_NETFILTER is not set
> # CONFIG_FILTER is not set
> CONFIG_UNIX=y
> CONFIG_INET=y
> # CONFIG_IP_MULTICAST is not set
> # CONFIG_IP_ADVANCED_ROUTER is not set
> # CONFIG_IP_PNP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_ARPD is not set
> # CONFIG_INET_ECN is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_IPV6 is not set
> # CONFIG_KHTTPD is not set
> # CONFIG_ATM is not set
> # CONFIG_VLAN_8021Q is not set
> #
> #
> #
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> #
> # Appletalk devices
> #
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_LLC is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
> #
> # Network testing
> #
> # CONFIG_NET_PKTGEN is not set
> #
> # Telephony Support
> #
> # CONFIG_PHONE is not set
> #
> # ATA/IDE/MFM/RLL support
> #
> CONFIG_IDE=y
> #
> # IDE, ATA and ATAPI Block devices
> #
> CONFIG_BLK_DEV_IDE=y
> #
> # Please see Documentation/ide.txt for help/info on IDE drives
> #
> # CONFIG_BLK_DEV_HD_IDE is not set
> # CONFIG_BLK_DEV_HD is not set
> CONFIG_BLK_DEV_IDEDISK=y
> # CONFIG_IDEDISK_MULTI_MODE is not set
> # CONFIG_IDEDISK_STROKE is not set
> # CONFIG_BLK_DEV_IDEDISK_VENDOR is not set
> # CONFIG_BLK_DEV_COMMERIAL is not set
> CONFIG_BLK_DEV_IDECD=m
> CONFIG_BLK_DEV_IDETAPE=m
> # CONFIG_BLK_DEV_IDEFLOPPY is not set
> # CONFIG_BLK_DEV_IDESCSI is not set
> # CONFIG_IDE_TASK_IOCTL is not set
> #
> # IDE chipset support/bugfixes
> #
> # CONFIG_BLK_DEV_CMD640 is not set
> # CONFIG_BLK_DEV_RZ1000 is not set
> CONFIG_BLK_DEV_IDEPCI=y
> CONFIG_IDEPCI_SHARE_IRQ=y
> # CONFIG_BLK_DEV_IDEDMA_PCI is not set
> # CONFIG_BLK_DEV_OFFBOARD is not set
> # CONFIG_BLK_DEV_IDEDMA is not set
> # CONFIG_BLK_DEV_ADMA is not set
> # CONFIG_BLK_DEV_OPTI621 is not set
> # CONFIG_IDE_CHIPSETS is not set
> # CONFIG_IDEDMA_AUTO is not set
> # CONFIG_DMA_NONPCI is not set
> # CONFIG_BLK_DEV_IDE_MODES is not set
> # CONFIG_BLK_DEV_ATARAID is not set
> #
> # SCSI support
> #
> CONFIG_SCSI=y
> #
> # SCSI support type (disk, tape, CD-ROM)
> #
> CONFIG_BLK_DEV_SD=y
> CONFIG_SD_EXTRA_DEVS=40
> CONFIG_CHR_DEV_ST=m
> CONFIG_CHR_DEV_OSST=m
> CONFIG_BLK_DEV_SR=m
> # CONFIG_BLK_DEV_SR_VENDOR is not set
> CONFIG_SR_EXTRA_DEVS=2
> CONFIG_CHR_DEV_SG=m
> #
> # Some SCSI devices (e.g. CD jukebox) support multiple LUNs
> #
> CONFIG_SCSI_DEBUG_QUEUES=y
> CONFIG_SCSI_MULTI_LUN=y
> # CONFIG_SCSI_CONSTANTS is not set
> # CONFIG_SCSI_LOGGING is not set
> #
> # SCSI low-level drivers
> #
> # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
> # CONFIG_SCSI_7000FASST is not set
> # CONFIG_SCSI_ACARD is not set
> # CONFIG_SCSI_AHA152X is not set
> # CONFIG_SCSI_AHA1542 is not set
> # CONFIG_SCSI_AHA1740 is not set
> # CONFIG_SCSI_AACRAID is not set
> CONFIG_SCSI_AIC7XXX=y
> CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
> CONFIG_AIC7XXX_RESET_DELAY_MS=15000
> # CONFIG_AIC7XXX_PROBE_EISA_VL is not set
> # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
> # CONFIG_SCSI_DPT_I2O is not set
> # CONFIG_SCSI_ADVANSYS is not set
> # CONFIG_SCSI_IN2000 is not set
> # CONFIG_SCSI_AM53C974 is not set
> # CONFIG_SCSI_MEGARAID is not set
> # CONFIG_SCSI_BUSLOGIC is not set
> # CONFIG_SCSI_CPQFCTS is not set
> # CONFIG_SCSI_DMX3191D is not set
> # CONFIG_SCSI_DTC3280 is not set
> # CONFIG_SCSI_EATA is not set
> # CONFIG_SCSI_EATA_DMA is not set
> # CONFIG_SCSI_EATA_PIO is not set
> # CONFIG_SCSI_FUTURE_DOMAIN is not set
> # CONFIG_SCSI_GDTH is not set
> # CONFIG_SCSI_GENERIC_NCR5380 is not set
> # CONFIG_SCSI_IPS is not set
> # CONFIG_SCSI_INITIO is not set
> # CONFIG_SCSI_INIA100 is not set
> # CONFIG_SCSI_PPA is not set
> # CONFIG_SCSI_IMM is not set
> # CONFIG_SCSI_NCR53C406A is not set
> # CONFIG_SCSI_NCR53C7xx is not set
> # CONFIG_SCSI_SYM53C8XX_2 is not set
> # CONFIG_SCSI_NCR53C8XX is not set
> # CONFIG_SCSI_SYM53C8XX is not set
> # CONFIG_SCSI_PAS16 is not set
> # CONFIG_SCSI_PCI2000 is not set
> # CONFIG_SCSI_PCI2220I is not set
> # CONFIG_SCSI_PSI240I is not set
> # CONFIG_SCSI_QLOGIC_FAS is not set
> # CONFIG_SCSI_QLOGIC_ISP is not set
> # CONFIG_SCSI_QLOGIC_FC is not set
> # CONFIG_SCSI_QLOGIC_1280 is not set
> # CONFIG_SCSI_SEAGATE is not set
> # CONFIG_SCSI_SIM710 is not set
> # CONFIG_SCSI_SYM53C416 is not set
> # CONFIG_SCSI_DC390T is not set
> # CONFIG_SCSI_T128 is not set
> # CONFIG_SCSI_U14_34F is not set
> # CONFIG_SCSI_ULTRASTOR is not set
> # CONFIG_SCSI_DEBUG is not set
> #
> # Fusion MPT device support
> #
> # CONFIG_FUSION is not set
> # CONFIG_FUSION_BOOT is not set
> # CONFIG_FUSION_ISENSE is not set
> # CONFIG_FUSION_CTL is not set
> # CONFIG_FUSION_LAN is not set
> #
> # IEEE 1394 (FireWire) support (EXPERIMENTAL)
> #
> # CONFIG_IEEE1394 is not set
> #
> # I2O device support
> #
> # CONFIG_I2O is not set
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> CONFIG_DUMMY=m
> CONFIG_BONDING=m
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_ETHERTAP is not set
> # CONFIG_NET_SB1000 is not set
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_SUNGEM is not set
> CONFIG_NET_VENDOR_3COM=y
> # CONFIG_EL1 is not set
> # CONFIG_EL2 is not set
> # CONFIG_ELPLUS is not set
> # CONFIG_EL16 is not set
> CONFIG_EL3=m
> # CONFIG_3C515 is not set
> CONFIG_VORTEX=m
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
> # CONFIG_AT1700 is not set
> # CONFIG_DEPCA is not set
> # CONFIG_HP100 is not set
> # CONFIG_NET_ISA is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_AC3200 is not set
> # CONFIG_APRICOT is not set
> # CONFIG_CS89x0 is not set
> # CONFIG_TULIP is not set
> # CONFIG_TC35815 is not set
> # CONFIG_DE4X5 is not set
> # CONFIG_DGRS is not set
> # CONFIG_DM9102 is not set
> CONFIG_EEPRO100=y
> # CONFIG_FEALNX is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_8139CP is not set
> CONFIG_8139TOO=m
> # CONFIG_8139TOO_PIO is not set
> # CONFIG_8139TOO_TUNE_TWISTER is not set
> # CONFIG_8139TOO_8129 is not set
> # CONFIG_8139_NEW_RX_RESET is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_TLAN is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_WINBOND_840 is not set
> # CONFIG_NET_POCKET is not set
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_DL2K is not set
> # CONFIG_NS83820 is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_TIGON3 is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> CONFIG_PLIP=m
> CONFIG_PPP=m
> CONFIG_PPP_MULTILINK=y
> CONFIG_PPP_ASYNC=m
> CONFIG_PPP_SYNC_TTY=m
> CONFIG_PPP_DEFLATE=m
> CONFIG_PPP_BSDCOMP=m
> CONFIG_PPPOE=m
> CONFIG_SLIP=m
> CONFIG_SLIP_COMPRESSED=y
> CONFIG_SLIP_SMART=y
> CONFIG_SLIP_MODE_SLIP6=y
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
> #
> # ISDN subsystem
> #
> CONFIG_ISDN=m
> CONFIG_ISDN_BOOL=y
> CONFIG_ISDN_PPP=y
> CONFIG_ISDN_PPP_VJ=y
> CONFIG_ISDN_MPP=y
> CONFIG_ISDN_PPP_BSDCOMP=m
> CONFIG_ISDN_AUDIO=y
> CONFIG_ISDN_TTY_FAX=y
> #
> # ISDN feature submodules
> #
> CONFIG_ISDN_DRV_LOOP=m
> CONFIG_ISDN_DIVERSION=m
> #
> # low-level hardware drivers
> #
> #
> # Passive ISDN cards
> #
> CONFIG_ISDN_DRV_HISAX=m
> CONFIG_ISDN_HISAX=y
> #
> # D-channel protocol features
> #
> CONFIG_HISAX_EURO=y
> # CONFIG_DE_AOC is not set
> # CONFIG_HISAX_NO_SENDCOMPLETE is not set
> # CONFIG_HISAX_NO_LLC is not set
> # CONFIG_HISAX_NO_KEYPAD is not set
> CONFIG_HISAX_1TR6=y
> CONFIG_HISAX_NI1=y
> CONFIG_HISAX_MAX_CARDS=8
> #
> # HiSax supported cards
> #
> CONFIG_HISAX_16_0=y
> CONFIG_HISAX_16_3=y
> CONFIG_HISAX_TELESPCI=y
> CONFIG_HISAX_S0BOX=y
> CONFIG_HISAX_AVM_A1=y
> CONFIG_HISAX_FRITZPCI=y
> CONFIG_HISAX_AVM_A1_PCMCIA=y
> CONFIG_HISAX_ELSA=y
> CONFIG_HISAX_IX1MICROR2=y
> CONFIG_HISAX_DIEHLDIVA=y
> CONFIG_HISAX_ASUSCOM=y
> CONFIG_HISAX_TELEINT=y
> CONFIG_HISAX_HFCS=y
> CONFIG_HISAX_SEDLBAUER=y
> CONFIG_HISAX_SPORTSTER=y
> CONFIG_HISAX_MIC=y
> CONFIG_HISAX_NETJET=y
> CONFIG_HISAX_NETJET_U=y
> CONFIG_HISAX_NICCY=y
> CONFIG_HISAX_ISURF=y
> CONFIG_HISAX_HSTSAPHIR=y
> CONFIG_HISAX_BKM_A4T=y
> CONFIG_HISAX_SCT_QUADRO=y
> CONFIG_HISAX_GAZEL=y
> CONFIG_HISAX_HFC_PCI=y
> CONFIG_HISAX_W6692=y
> CONFIG_HISAX_HFC_SX=y
> # CONFIG_HISAX_DEBUG is not set
> CONFIG_HISAX_ST5481=m
> CONFIG_HISAX_FRITZ_PCIPNP=m
> #
> # Active ISDN cards
> #
> CONFIG_ISDN_DRV_ICN=m
> CONFIG_ISDN_DRV_PCBIT=m
> CONFIG_ISDN_DRV_SC=m
> CONFIG_ISDN_DRV_ACT2000=m
> CONFIG_ISDN_DRV_EICON=y
> CONFIG_ISDN_DRV_EICON_DIVAS=m
> CONFIG_ISDN_DRV_EICON_OLD=m
> CONFIG_ISDN_DRV_EICON_PCI=y
> CONFIG_ISDN_DRV_EICON_ISA=y
> CONFIG_ISDN_DRV_TPAM=m
> CONFIG_ISDN_CAPI=m
> # CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
> # CONFIG_ISDN_CAPI_MIDDLEWARE is not set
> CONFIG_ISDN_CAPI_CAPI20=m
> CONFIG_ISDN_CAPI_CAPIDRV=m
> CONFIG_ISDN_DRV_AVMB1_B1ISA=m
> CONFIG_ISDN_DRV_AVMB1_B1PCI=m
> CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
> CONFIG_ISDN_DRV_AVMB1_T1ISA=m
> CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
> CONFIG_ISDN_DRV_AVMB1_T1PCI=m
> CONFIG_ISDN_DRV_AVMB1_C4=m
> CONFIG_HYSDN=m
> CONFIG_HYSDN_CAPI=y
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> # CONFIG_CD_NO_IDESCSI is not set
> #
> # Input core support
> #
> # CONFIG_INPUT is not set
> CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
> CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
> #
> # Character devices
> #
> CONFIG_VT=y
> CONFIG_VT_CONSOLE=y
> CONFIG_SERIAL=y
> # CONFIG_SERIAL_CONSOLE is not set
> # CONFIG_SERIAL_EXTENDED is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=64
> CONFIG_PRINTER=m
> # CONFIG_LP_CONSOLE is not set
> # CONFIG_PPDEV is not set
> #
> # I2C support
> #
> # CONFIG_I2C is not set
> #
> # Mice
> #
> CONFIG_BUSMOUSE=m
> CONFIG_ATIXL_BUSMOUSE=m
> CONFIG_LOGIBUSMOUSE=m
> CONFIG_MS_BUSMOUSE=m
> CONFIG_MOUSE=m
> CONFIG_PSMOUSE=y
> # CONFIG_82C710_MOUSE is not set
> # CONFIG_PC110_PAD is not set
> # CONFIG_MK712_MOUSE is not set
> #
> # Joysticks
> #
> # CONFIG_INPUT_GAMEPORT is not set
> #
> # Input core support is needed for gameports
> #
> #
> # Input core support is needed for joysticks
> #
> # CONFIG_QIC02_TAPE is not set
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_AMD_RNG is not set
> # CONFIG_INTEL_RNG is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
> # CONFIG_SONYPI is not set
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> CONFIG_AGP=m
> CONFIG_AGP_INTEL=y
> CONFIG_AGP_I810=y
> CONFIG_AGP_VIA=y
> CONFIG_AGP_AMD=y
> CONFIG_AGP_SIS=y
> CONFIG_AGP_ALI=y
> CONFIG_AGP_SWORKS=y
> CONFIG_DRM=y
> # CONFIG_DRM_OLD is not set
> #
> # DRM 4.1 drivers
> #
> CONFIG_DRM_NEW=y
> CONFIG_DRM_TDFX=m
> CONFIG_DRM_R128=m
> CONFIG_DRM_RADEON=m
> CONFIG_DRM_I810=m
> CONFIG_DRM_MGA=m
> # CONFIG_DRM_SIS is not set
> CONFIG_MWAVE=m
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
> #
> # File systems
> #
> CONFIG_QUOTA=y
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
> CONFIG_REISERFS_FS=m
> # CONFIG_REISERFS_CHECK is not set
> # CONFIG_REISERFS_PROC_INFO is not set
> # CONFIG_ADFS_FS is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BFS_FS is not set
> CONFIG_EXT3_FS=y
> CONFIG_JBD=y
> # CONFIG_JBD_DEBUG is not set
> CONFIG_FAT_FS=m
> CONFIG_MSDOS_FS=m
> # CONFIG_UMSDOS_FS is not set
> CONFIG_VFAT_FS=m
> # CONFIG_EFS_FS is not set
> # CONFIG_CRAMFS is not set
> CONFIG_TMPFS=y
> CONFIG_RAMFS=y
> CONFIG_ISO9660_FS=m
> CONFIG_JOLIET=y
> CONFIG_ZISOFS=y
> # CONFIG_MINIX_FS is not set
> # CONFIG_VXFS_FS is not set
> CONFIG_NTFS_FS=m
> # CONFIG_NTFS_RW is not set
> # CONFIG_HPFS_FS is not set
> CONFIG_PROC_FS=y
> # CONFIG_DEVFS_FS is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_EXT2_FS=y
> # CONFIG_SYSV_FS is not set
> # CONFIG_UDF_FS is not set
> # CONFIG_UFS_FS is not set
> #
> # Network File Systems
> #
> # CONFIG_CODA_FS is not set
> # CONFIG_INTERMEZZO_FS is not set
> CONFIG_NFS_FS=m
> CONFIG_NFS_V3=y
> CONFIG_NFSD=m
> CONFIG_NFSD_V3=y
> CONFIG_SUNRPC=m
> CONFIG_LOCKD=m
> CONFIG_LOCKD_V4=y
> CONFIG_SMB_FS=m
> # CONFIG_SMB_NLS_DEFAULT is not set
> # CONFIG_NCP_FS is not set
> CONFIG_ZISOFS_FS=m
> CONFIG_ZLIB_FS_INFLATE=m
> #
> # Partition Types
> #
> # CONFIG_PARTITION_ADVANCED is not set
> CONFIG_MSDOS_PARTITION=y
> CONFIG_SMB_NLS=y
> CONFIG_NLS=y
> #
> # Native Language Support
> #
> CONFIG_NLS_DEFAULT="iso8859-1"
> CONFIG_NLS_CODEPAGE_437=y
> # CONFIG_NLS_CODEPAGE_737 is not set
> # CONFIG_NLS_CODEPAGE_775 is not set
> CONFIG_NLS_CODEPAGE_850=y
> # CONFIG_NLS_CODEPAGE_852 is not set
> # CONFIG_NLS_CODEPAGE_855 is not set
> # CONFIG_NLS_CODEPAGE_857 is not set
> # CONFIG_NLS_CODEPAGE_860 is not set
> # CONFIG_NLS_CODEPAGE_861 is not set
> # CONFIG_NLS_CODEPAGE_862 is not set
> # CONFIG_NLS_CODEPAGE_863 is not set
> # CONFIG_NLS_CODEPAGE_864 is not set
> # CONFIG_NLS_CODEPAGE_865 is not set
> # CONFIG_NLS_CODEPAGE_866 is not set
> # CONFIG_NLS_CODEPAGE_869 is not set
> # CONFIG_NLS_CODEPAGE_936 is not set
> # CONFIG_NLS_CODEPAGE_950 is not set
> # CONFIG_NLS_CODEPAGE_932 is not set
> # CONFIG_NLS_CODEPAGE_949 is not set
> # CONFIG_NLS_CODEPAGE_874 is not set
> # CONFIG_NLS_ISO8859_8 is not set
> # CONFIG_NLS_CODEPAGE_1250 is not set
> # CONFIG_NLS_CODEPAGE_1251 is not set
> CONFIG_NLS_ISO8859_1=y
> # CONFIG_NLS_ISO8859_2 is not set
> # CONFIG_NLS_ISO8859_3 is not set
> # CONFIG_NLS_ISO8859_4 is not set
> # CONFIG_NLS_ISO8859_5 is not set
> # CONFIG_NLS_ISO8859_6 is not set
> # CONFIG_NLS_ISO8859_7 is not set
> # CONFIG_NLS_ISO8859_9 is not set
> # CONFIG_NLS_ISO8859_13 is not set
> # CONFIG_NLS_ISO8859_14 is not set
> # CONFIG_NLS_ISO8859_15 is not set
> # CONFIG_NLS_KOI8_R is not set
> # CONFIG_NLS_KOI8_U is not set
> # CONFIG_NLS_UTF8 is not set
> #
> # Console drivers
> #
> CONFIG_VGA_CONSOLE=y
> CONFIG_VIDEO_SELECT=y
> # CONFIG_MDA_CONSOLE is not set
> #
> # Frame-buffer support
> #
> # CONFIG_FB is not set
> #
> # Sound
> #
> CONFIG_SOUND=m
> CONFIG_SOUND_BT878=m
> CONFIG_SOUND_CMPCI=m
> # CONFIG_SOUND_CMPCI_FM is not set
> # CONFIG_SOUND_CMPCI_MIDI is not set
> # CONFIG_SOUND_CMPCI_JOYSTICK is not set
> # CONFIG_SOUND_CMPCI_CM8738 is not set
> CONFIG_SOUND_EMU10K1=m
> CONFIG_MIDI_EMU10K1=y
> CONFIG_SOUND_FUSION=m
> CONFIG_SOUND_CS4281=m
> CONFIG_SOUND_ES1370=m
> CONFIG_SOUND_ES1371=m
> CONFIG_SOUND_ESSSOLO1=m
> CONFIG_SOUND_MAESTRO=m
> CONFIG_SOUND_MAESTRO3=m
> CONFIG_SOUND_ICH=m
> CONFIG_SOUND_RME96XX=m
> CONFIG_SOUND_SONICVIBES=m
> CONFIG_SOUND_TRIDENT=m
> CONFIG_SOUND_MSNDCLAS=m
> # CONFIG_MSNDCLAS_HAVE_BOOT is not set
> CONFIG_MSNDCLAS_INIT_FILE="/etc/sound/msndinit.bin"
> CONFIG_MSNDCLAS_PERM_FILE="/etc/sound/msndperm.bin"
> CONFIG_SOUND_MSNDPIN=m
> # CONFIG_MSNDPIN_HAVE_BOOT is not set
> CONFIG_MSNDPIN_INIT_FILE="/etc/sound/pndspini.bin"
> CONFIG_MSNDPIN_PERM_FILE="/etc/sound/pndsperm.bin"
> CONFIG_SOUND_VIA82CXXX=m
> CONFIG_MIDI_VIA82CXXX=y
> CONFIG_SOUND_OSS=m
> # CONFIG_SOUND_TRACEINIT is not set
> # CONFIG_SOUND_DMAP is not set
> CONFIG_SOUND_AD1816=m
> CONFIG_SOUND_SGALAXY=m
> CONFIG_SOUND_ADLIB=m
> CONFIG_SOUND_ACI_MIXER=m
> CONFIG_SOUND_CS4232=m
> CONFIG_SOUND_SSCAPE=m
> CONFIG_SOUND_GUS=m
> # CONFIG_SOUND_GUS16 is not set
> # CONFIG_SOUND_GUSMAX is not set
> CONFIG_SOUND_VMIDI=m
> CONFIG_SOUND_TRIX=m
> CONFIG_SOUND_MSS=m
> CONFIG_SOUND_MPU401=m
> CONFIG_SOUND_NM256=m
> CONFIG_SOUND_MAD16=m
> # CONFIG_MAD16_OLDCARD is not set
> CONFIG_SOUND_PAS=m
> CONFIG_SOUND_PSS=m
> # CONFIG_PSS_MIXER is not set
> # CONFIG_PSS_HAVE_BOOT is not set
> CONFIG_SOUND_SB=m
> CONFIG_SOUND_AWE32_SYNTH=m
> CONFIG_SOUND_WAVEFRONT=m
> CONFIG_SOUND_MAUI=m
> CONFIG_SOUND_YM3812=m
> CONFIG_SOUND_OPL3SA1=m
> CONFIG_SOUND_OPL3SA2=m
> CONFIG_SOUND_YMFPCI=m
> # CONFIG_SOUND_YMFPCI_LEGACY is not set
> CONFIG_SOUND_UART6850=m
> CONFIG_SOUND_AEDSP16=m
> # CONFIG_SC6600 is not set
> # CONFIG_AEDSP16_SBPRO is not set
> # CONFIG_AEDSP16_MSS is not set
> # CONFIG_AEDSP16_MPU401 is not set
> #
> # USB support
> #
> CONFIG_USB=m
> # CONFIG_USB_DEBUG is not set
> #
> # Miscellaneous USB options
> #
> CONFIG_USB_DEVICEFS=y
> # CONFIG_USB_BANDWIDTH is not set
> # CONFIG_USB_LONG_TIMEOUT is not set
> #
> # USB Host Controller Drivers
> #
> CONFIG_USB_EHCI_HCD=m
> CONFIG_USB_UHCI=m
> CONFIG_USB_UHCI_ALT=m
> CONFIG_USB_OHCI=m
> #
> # USB Device Class drivers
> #
> CONFIG_USB_AUDIO=m
> # CONFIG_USB_EMI26 is not set
> CONFIG_USB_BLUETOOTH=m
> CONFIG_USB_STORAGE=m
> # CONFIG_USB_STORAGE_DEBUG is not set
> CONFIG_USB_STORAGE_DATAFAB=y
> CONFIG_USB_STORAGE_FREECOM=y
> CONFIG_USB_STORAGE_ISD200=y
> CONFIG_USB_STORAGE_DPCM=y
> CONFIG_USB_STORAGE_HP8200e=y
> # CONFIG_USB_STORAGE_SDDR09 is not set
> # CONFIG_USB_STORAGE_JUMPSHOT is not set
> CONFIG_USB_ACM=m
> CONFIG_USB_PRINTER=m
> #
> # USB Human Interface Devices (HID)
> #
> CONFIG_USB_HID=m
> #
> # Input core support is needed for USB HID input layer or HIDBP support
> #
> # CONFIG_USB_HIDDEV is not set
> #
> # USB Imaging devices
> #
> CONFIG_USB_DC2XX=m
> CONFIG_USB_MDC800=m
> CONFIG_USB_SCANNER=m
> CONFIG_USB_MICROTEK=m
> CONFIG_USB_HPUSBSCSI=m
> #
> # USB Multimedia devices
> #
> #
> # Video4Linux support is needed for USB Multimedia device support
> #
> #
> # USB Network adaptors
> #
> CONFIG_USB_PEGASUS=m
> CONFIG_USB_RTL8150=m
> CONFIG_USB_KAWETH=m
> CONFIG_USB_CATC=m
> CONFIG_USB_CDCETHER=m
> CONFIG_USB_USBNET=m
> #
> # USB port drivers
> #
> CONFIG_USB_USS720=m
> #
> # USB Serial Converter support
> #
> CONFIG_USB_SERIAL=m
> CONFIG_USB_SERIAL_GENERIC=y
> CONFIG_USB_SERIAL_BELKIN=m
> CONFIG_USB_SERIAL_WHITEHEAT=m
> CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
> CONFIG_USB_SERIAL_EMPEG=m
> CONFIG_USB_SERIAL_FTDI_SIO=m
> CONFIG_USB_SERIAL_VISOR=m
> # CONFIG_USB_SERIAL_IPAQ is not set
> # CONFIG_USB_SERIAL_IR is not set
> CONFIG_USB_SERIAL_EDGEPORT=m
> CONFIG_USB_SERIAL_KEYSPAN_PDA=m
> CONFIG_USB_SERIAL_KEYSPAN=m
> # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
> # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
> CONFIG_USB_SERIAL_MCT_U232=m
> # CONFIG_USB_SERIAL_KLSI is not set
> CONFIG_USB_SERIAL_PL2303=m
> CONFIG_USB_SERIAL_CYBERJACK=m
> # CONFIG_USB_SERIAL_XIRCOM is not set
> CONFIG_USB_SERIAL_OMNINET=m
> #
> # USB Miscellaneous drivers
> #
> CONFIG_USB_RIO500=m
> CONFIG_USB_AUERSWALD=m
> CONFIG_USB_BRLVGER=m
> #
> # Bluetooth support
> #
> # CONFIG_BLUEZ is not set
> #
> # Kernel hacking
> #
> # CONFIG_DEBUG_KERNEL is not set
>
>
>
>
>
>
> ----- Original Message -----
> From: "Eric Sawler" <erics@novex.ns.ca>
> To: <hylafax-users@hylafax.org>
> Sent: Tuesday, September 10, 2002 7:06 PM
> Subject: [hylafax-users] Waiting for modem to come ready - USR on RedHat
7.3
> possible workaround
>
>
> >
> > I was having the same problem that others were -
> > After a fax was sent, the modem would not answer,
> > and faxstat reported "Waiting for modem to come ready"
> >
> > I noticed that in this state, the TR light on the modem was off,
> > but came back on if I restarted faxgetty. So I commented out the
> > line in config.ttyS0 which said:
> > ModemSetupDTRCmd ...
> >
> > Now it works!
> >
> > Eric
> >
> >
> >
> >
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> >   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail
sales@hylafax.org.*
> >
> >
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
>
>
> ----- Original Message -----
> From: "Chad Meyer" <cpmeyer_encoremusic@yahoo.com>
> To: <hylafax-users@hylafax.org>
> Sent: Wednesday, September 18, 2002 4:25 PM
> Subject: [hylafax-users] Newbie - Modem Reset Problem
>
>
> > When the fax server is first powered up and running I
> > can receive faxes, but after I use the sendfax command
> > once I can't receive faxes anymore. I can send all the
> > faxes I want, but it won't receive any. When I
> > actually receive faxes the modem resets fine, but when
> > I send a fax the terminal ready light doesn't come on
> > after the reset and it won't pick up the phone line on
> > any incoming calls. Any help would be greatly
> > appreciated.
> >
> > I'm using Hylafax 4.1.3, RH Linux 7.3, with a USR 56K
> > Faxmodem.
> >
> > Here is the config file,
> >
> > # Generic Class 1 modem configuration.
> > #
> > # EDIT THIS CONFIGURATION TO REFLECT YOUR SETUP
> > #
> > CountryCode: 1
> > LongDistancePrefix: 1
> > InternationalPrefix: 011
> > AreaCode: 000
> > DialStringRules: etc/dialrules
> > FAXNumber: 555-5555
> > LocalIdentifier: "Encore Music Company, Inc."  #name
> > that will appear on fax
> > ServerTracing: 43032 # log server-related operations
> > SessionTracing: 11 # log server-related operations
> > RecvFileMode: 0666 # recvd facsimile are not public
> > LogFileMode: 0600 # private log files
> > DeviceMode: 0600 # device is accessible only to
> > uucp/fax
> > SpeakerVolume: low
> > RingsBeforeAnswer: 2
> > TagLineFont: etc/lutRS18.pcf # tag line font
> > TagLineFormat: "From %%l|%c|Page %%P of %%T"
> > GettyArgs: "-h %l dx_%s" # modem must auto-detect
> > fax/data
> > MaxSendPages: 50 # max pages in an outbound job
> > MaxRecvPages: 50 # max pages in an inbound job
> >
> > # Modem-related stuff: should reflect modem command
> > interface
> > # and hardware connection/cabling (e.g. flow control).
> > #
> >
> > ModemType: Class1 # use this to supply a hint
> > ModemRate: 19200 # rate for DCE-DTE communication
> > ModemFlowControl: rtscts # XON/XOFF flow control
> > assumed
> >
> > #ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets
> > modem
> >
> > ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets
> > modem
> > ModemSetupDCDCmd: AT&C1 # setup so DCD follows
> > carrier
> >
> > #
> > # We normally append the "@" symbol to the dial string
> > so that
> > # the modem will wait 5 seconds before attempting to
> > connect
> > # and return result codes that distinguish between no
> > carrier
> > # and no answer.  This makes it possible to avoid
> > problems with
> > # repeatedly dialing a number that doesn't have a fax
> > machine
> > # (kudos to Stuart Lynne for this trick.)
> > #
> > # NB: If you need to prefix phone numbers to get
> > through a PBX,
> > #     put it in the ModemDialCmd; e.g. "DT9%s@".
> > #
> > #ModemDialCmd: ATS7=100DT%s
> > # T for tone dialing, @ for silence
> > #
> > # Other possible configuration stuff.  The default
> > strings are
> > # shown below.  Only those that are different from the
> > defaults
> > # need to be included in the configuration file.
> > #
> > #ModemNoFlowCmd AT&H0&I0&R1
> > #ModemHardFlowCmd AT&H1&I0&R2
> > #ModemSoftFlowCmd AT&H2&I2&R1
> >
> > ModemResetCmds: ATZ # stuff to do when modem is
> > reset
> > ModemAnswerCmd: ATA # use this to answer phone
> > ModemNoFlowCmd: AT&K # disable flow control cmd
> > ModemHardFlowCmd: AT&K3&H1 # hardware flow control
> > cmd
> > ModemSoftFlowCmd: AT&K4&H2 # software flow control
> > cmd
> > ModemNoAutoAnswerCmd: ATS0=0 # disable auto-answer
> >
> > #
> > # Set modem speaker volume commands: OFF QUIET LOW
> > MEDIUM HIGH.
> > # Note that we both turn the speaker on/off and set
> > volume.
> > #
> > #ModemSetVolumeCmd: "ATM0 ATL0M1 ATL1M1 ATL2M1 ATL3M1"
> >
> > ModemEchoOffCmd: ATE0 # disable command echo
> > ModemVerboseResultsCmd: ATV1 # enable verbose command
> > results
> > ModemResultCodesCmd: ATQ0X4 # enable result codes
> > ModemOnHookCmd: ATH0 # place phone on hook (hangup)
> > ModemSoftResetCmd: ATZ # do soft reset of modem
> > ModemWaitTimeCmd: ATS7=60 # wait 60 seconds for
> > carrier
> >
> > #ModemCommaPauseTimeCmd: ATS8=2 # comma pause time is
> > 2 seconds
> > #ModemRecvFillOrder: LSB2MSB # bit order of received
> > facsimile
> > #ModemSendFillOrder: LSB2MSB # bit order modem
> > expects for transmit
> > #
> >
> > Class1Cmd: AT+FCLASS=1 # command to enter class 1
> > Class1TCFResponseDelay: 75 # 75ms delay between recv
> > TCF & response
> > Class1SendPPMDelay: 75 # 75ms delay before sending
> > PPM
> > Class1SendTCFDelay: 75 # 75ms delay between sending
> > DCS & TCF
> > Class1SwitchingDelay: 150 # 150ms delay in switching
> > transmission direction
> > Class1TrainingRecovery: 1500 # 1.5sec delay after
> > training failure
> > Class1RecvAbortOK: 200 # wait 200ms for abort
> > response
> > Class1FrameOverhead: 4 # 4 byte overhead in recvd
> > HDLC frames
> > Class1RecvIdentTimer: 40000 # 35+5secs waiting for
> > ident frames
> > Class1TCFMaxNonZero: 10 # max 10% of data may be
> > non-zero
> > Class1TCFMinRun: 1000 # min run is 2/3rds of TCF
> > duration
> >
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! News - Today's headlines
> > http://news.yahoo.com
> >
> > ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> >   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
> >  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
> >   *To learn about commercial HylaFAX(tm) support, mail
sales@hylafax.org.*
> >
> >
>
>
> ____________________ HylaFAX(tm) Users Mailing List
_______________________
>   To subscribe/unsubscribe, click
http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
/dev/null
>   *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services