Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Modem Conexant HCF 56k Data/Fax Modem (rev 08). Not able to configure it.



I solved the problem, was a problem of permission on the device file.

Can I ask you how did you configure the modem in order to run Hylafax???

I have not been able ... faxaddmodem tells me it is not able to recognize the 
class of the modem. But manually, it is a class 1!

Do yo have any hint?

On Saturday 07 September 2002 3:11 pm, Sunil William Savkar wrote:
> On Saturday 07 September 2002 08:37 am, Corrado e Rina wrote:
> >> cu: open (/dev/ttySHCF0): Permission denied
> >
> > cu: ttySHCF0: Line in use
> >
> > But the line is not in use at all ... :-(
> >
> > Do you have a clue???
>
> Go to /var/lock and you will probably find a stale lock file there.  Delete
> it and try again.  If I am right, you should be able to cruise away.
>
> FYI, I was using the HCF Conexant variety modem for a short while but found
> it extremely flakey.  I went out and bought myself a USR Faxmodem 56k which
> is working perfectly for my small needs.
>
> However, other people here seem to swear by the Multtech models which
> appear to be more stable, and will only set you back a few bucks more.
>
> Cheers.
>
> Sunil

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services