|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Again, receiving squashed faxes...
Quality is ok, but at ~30% progress transfer gets slower
-----------------------------------------------------------
Typical recieve log
===========================================================
Sep 03 16:20:40.99: [ 1711]: SESSION BEGIN 00000009 78121183239
Sep 03 16:20:40.99: [ 1711]: HylaFAX (tm) Version 4.1.1
Sep 03 16:20:47.30: [ 1711]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0'
Sep 03 16:20:47.30: [ 1711]: STATE CHANGE: ANSWERING -> RECEIVING
Sep 03 16:22:14.51: [ 1711]: RECV/CQ: Bad 1D pixel count, row 1191, got 0, expected 1728
Sep 03 16:22:14.51: [ 1711]: RECV/CQ: Bad 1D pixel count, row 1192, got 0, expected 1728
Sep 03 16:22:14.51: [ 1711]: RECV/CQ: Bad 1D pixel count, row 1193, got 0, expected 1728
Sep 03 16:22:14.51: [ 1711]: RECV/CQ: Bad 1D pixel count, row 1194, got 0, expected 1728
Sep 03 16:22:14.51: [ 1711]: RECV/CQ: Bad 1D pixel count, row 1195, got 0, expected 1728
Sep 03 16:22:14.51: [ 1711]: RECV/CQ: Invalid WhiteTable code word, row 1196, x 0
Sep 03 16:22:14.91: [ 1711]: RECV/CQ: Adjusting for RTC found at row 1190
Sep 03 16:22:16.35: [ 1711]: RECV FAX (00000009): from , page 1 in 1:27, INF, 3.85 line/mm, 1-D MR, 9600 bit/s
Sep 03 16:22:16.35: [ 1711]: RECV FAX (00000009): recvq/fax00001.tif from , route to <unspecified>, 1 pages in 1:29
Sep 03 16:22:19.80: [ 1711]: RECV FAX: bin/faxrcvd "recvq/fax00001.tif" "ttyS0" "00000009" "" "" ""
Sep 03 16:22:20.15: [ 1711]: SESSION END
===========================================================
Also got sent pages shifted left for about 5mm.
witching flow control from rtscts to xonxoff shifted page a bit right, just enough for zero left margin.
-----------------------------------------------------------
Software
===========================================================
Debian GNU/Linux 3.0 (2.2.20)
HylaFax 4.1.1
===========================================================
-----------------------------------------------------------
Output from probemodem
===========================================================
Probing for best speed to talk to modem: 38400 OK.
This looks like a Class 1+2.0 modem.
ATI0 RESULT = "OK" RESPONSE = "3366"
ATI1 RESULT = "OK" RESPONSE = "7606"
ATI2 RESULT = "OK" RESPONSE = "OK"
ATI3 RESULT = "OK" RESPONSE = "00:01:03"
Class 1 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2.0"
AT+FCLASS? RESULT = "OK" RESPONSE = "0"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAA=? RESULT = "OK" RESPONSE = "0,1"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FAE=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FAE? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FTH=? RESULT = "OK" RESPONSE = "3"
AT+FRH=? RESULT = "OK" RESPONSE = "3"
AT+FTM=? RESULT = "OK" RESPONSE = "24,48,72,73,74,96,97,98,121,122,145,146"
AT+FRM=? RESULT = "OK" RESPONSE = "24,48,72,73,74,96,97,98,121,122,145,146"
AT+FTS=? RESULT = "OK" RESPONSE = "OK"
AT+FRS=? RESULT = "OK" RESPONSE = "OK"
Class 2.0 stuff...
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2.0"
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS=2.0 RESULT = "OK" RESPONSE = "OK"
AT+FCLASS? RESULT = "OK" RESPONSE = "2.0"
AT+FJU=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FJU? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FDR=? RESULT = "OK" RESPONSE = "OK"
AT+FDT=? RESULT = "OK" RESPONSE = "OK"
AT+FIP=? RESULT = "OK" RESPONSE = "OK"
AT+FAA=? RESULT = "OK" RESPONSE = "0,1"
AT+FAA? RESULT = "OK" RESPONSE = "0"
AT+FBS? RESULT = "OK" RESPONSE = "1800,4000"
AT+FBO=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FBO? RESULT = "OK" RESPONSE = "0"
AT+FBU=? RESULT = "OK" RESPONSE = "0"
AT+FBU? RESULT = "OK" RESPONSE = "0"
AT+FCC=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)"
AT+FCC? RESULT = "OK" RESPONSE = "1,5,0,2,0,0,0,0"
AT+FCQ=? RESULT = "OK" RESPONSE = "(0-2),(0-2)"
AT+FCQ? RESULT = "OK" RESPONSE = "1,0"
AT+FCR=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FCR? RESULT = "OK" RESPONSE = "1"
AT+FCS=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FCS? RESULT = "OK" RESPONSE = "FCS:0,0,0,2,0,0,0,0"
AT+FCT=? RESULT = "OK" RESPONSE = "(0-255)"
AT+FCT? RESULT = "OK" RESPONSE = "030"
AT+FEA=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FEA? RESULT = "OK" RESPONSE = "0"
AT+FFC=? RESULT = "OK" RESPONSE = "0,0,0,0"
AT+FFC? RESULT = "OK" RESPONSE = "0,0,0,0"
AT+FHS=? RESULT = "ERROR" RESPONSE = "ERROR"
AT+FHS? RESULT = "OK" RESPONSE = "00"
AT+FIE=? RESULT = "OK" RESPONSE = "0"
AT+FIE? RESULT = "OK" RESPONSE = "0"
AT+FIS=? RESULT = "OK" RESPONSE = "(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)"
AT+FIS? RESULT = "OK" RESPONSE = "1,5,0,2,0,0,0,0"
AT+FLI=? RESULT = "OK" RESPONSE = "(20-7E)"
AT+FLI? RESULT = "OK" RESPONSE = """"
AT+FLO=? RESULT = "OK" RESPONSE = "(0-2)"
AT+FLO? RESULT = "OK" RESPONSE = "1"
AT+FLP=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FLP? RESULT = "OK" RESPONSE = "0"
AT+FMI? RESULT = "OK" RESPONSE = "USRobotics Courier V.Everything"
AT+FMM? RESULT = "OK" RESPONSE = "Product type US/Canada External"
AT+FMR? RESULT = "OK" RESPONSE = "Supervisor date 11/01/95"
AT+FMS=? RESULT = "OK" RESPONSE = "(0-5)"
AT+FMS? RESULT = "OK" RESPONSE = "0"
AT+FNR=? RESULT = "OK" RESPONSE = "(0,1),(0,1),(0,1),(0,1)"
AT+FNR? RESULT = "OK" RESPONSE = "0,0,0,0"
AT+FNS=? RESULT = "OK" RESPONSE = "90"
AT+FNS? RESULT = "OK" RESPONSE = """"
AT+FPI=? RESULT = "OK" RESPONSE = "(20-7E)"
AT+FPI? RESULT = "OK" RESPONSE = """"
AT+FPP=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FPP? RESULT = "OK" RESPONSE = "0"
AT+FPR=? RESULT = "OK" RESPONSE = "(0,1,2,4,8,16,24)"
AT+FPR? RESULT = "OK" RESPONSE = "0"
AT+FPS=? RESULT = "OK" RESPONSE = "(1-5)"
AT+FPS? RESULT = "OK" RESPONSE = "1"
AT+FRQ=? RESULT = "OK" RESPONSE = "0,0"
AT+FRQ? RESULT = "OK" RESPONSE = "0,0"
AT+FRY=? RESULT = "OK" RESPONSE = "0"
AT+FRY? RESULT = "OK" RESPONSE = "0"
AT+FSP=? RESULT = "OK" RESPONSE = "(0,1)"
AT+FSP? RESULT = "OK" RESPONSE = "0"
AT+FKS=? RESULT = "OK" RESPONSE = "OK"
===========================================================
TIA,
[NICK]
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*
