SPAM Re: [hylafax-users] automatic paper cutter ignores Formfeed

To: Hylafax Mailinglist <hylafax-users@hylafax.org>
Subject: *****SPAM***** Re: [hylafax-users] automatic paper cutter ignores Formfeed
From: Alexander.so-8859-1?Q?Döring?doering@melosgmbh.de
Date: Tue, 03 Sep 2002 14:36:40 +0200

SPAM: -------------------- Start SpamAssassin results ----------------------
SPAM: This mail is probably spam.  The original message has been altered
SPAM: so you can recognise or block similar unwanted mail in future.
SPAM: See http://spamassassin.org/tag/ for more details.
SPAM: 
SPAM: Content analysis details:   (6.4 hits, 5 required)
SPAM: FORGED_RCVD_FOUND  (0.0 points)  Possibly-forged 'Received:' header found
SPAM: DOUBLE_CAPSWORD    (1.1 points)  BODY: A word in all caps repeated on the line
SPAM: UPPERCASE_25_50    (1.9 points)  BODY: message body is 25-50% uppercase
SPAM: NO_MX_FOR_FROM     (1.8 points)  No MX records for the From: domain
SPAM: MSG_ID_ADDED_BY_MTA_2 (1.6 points)  'Message-Id' was added by a relay (2)
SPAM: 
SPAM: -------------------- End of SpamAssassin results ---------------------

Lee Howard wrote:
> 
> On 2002.09.02 04:45 Alexander Döring wrote:
> >       System: SuSE Linux 7.2
> >       Kernel:  2.4.4-4 GB #8
> >       GCC:2.95.3
> >
> > Modem:        Elsa Mikrolink 33.6 TQV
> >
> > Hello list,
> >
> > after installing Hylafax we have problems with some Canon T21 fax.
> > With our old Fax-Server the automatic paper cutter works fine
> > (cut on formfeed).
> > With Hylafax there is only one cut at the end of the fax.
> >
> > Who can help ?
> 
> Please send a session log.
> 
> Lee.

Here is a session log:

Sep 03 13:15:21.45: [ 1757]: SESSION BEGIN 00010165 493082093309
Sep 03 13:15:21.45: [ 1757]: SEND FAX: JOB 1393 DEST 82093309 COMMID
00010165
Sep 03 13:15:21.45: [ 1757]: DELAY 2600 ms
Sep 03 13:15:24.15: [ 1757]: <-- [16:ATX3E0V1Q0S0=0H\r]
Sep 03 13:15:24.17: [ 1757]: --> [2:OK]
Sep 03 13:15:24.17: [ 1757]: <-- [21:ATS8=2S7=60\Q3&D2&C1\r]
Sep 03 13:15:24.19: [ 1757]: --> [2:OK]
Sep 03 13:15:24.19: [ 1757]: <-- [14:AT+FCLASS=2.0\r]
Sep 03 13:15:24.20: [ 1757]: --> [2:OK]
Sep 03 13:15:24.20: [ 1757]: <-- [9:AT+FLO=2\r]
Sep 03 13:15:24.21: [ 1757]: --> [2:OK]
Sep 03 13:15:24.21: [ 1757]: <-- [9:AT+FPP=0\r]
Sep 03 13:15:24.22: [ 1757]: --> [2:OK]
Sep 03 13:15:24.22: [ 1757]: <-- [9:AT+FBO=0\r]
Sep 03 13:15:24.23: [ 1757]: --> [2:OK]
Sep 03 13:15:24.23: [ 1757]: <-- [10:AT+FCT=30\r]
Sep 03 13:15:24.24: [ 1757]: --> [2:OK]
Sep 03 13:15:24.24: [ 1757]: <-- [15:AT+FNR=1,1,1,1\r]
Sep 03 13:15:24.25: [ 1757]: --> [2:OK]
Sep 03 13:15:24.25: [ 1757]: <-- [9:AT+FIE=0\r]
Sep 03 13:15:24.26: [ 1757]: --> [2:OK]
Sep 03 13:15:24.26: [ 1757]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Sep 03 13:15:24.28: [ 1757]: --> [2:OK]
Sep 03 13:15:24.28: [ 1757]: <-- [5:ATM1\r]
Sep 03 13:15:24.29: [ 1757]: --> [2:OK]
Sep 03 13:15:24.29: [ 1757]: <-- [14:AT+FCLASS=2.0\r]
Sep 03 13:15:24.40: [ 1757]: --> [2:OK]
Sep 03 13:15:24.40: [ 1757]: <-- [9:AT+FLO=2\r]
Sep 03 13:15:24.51: [ 1757]: --> [2:OK]
Sep 03 13:15:24.51: [ 1757]: <-- [9:AT+FPP=0\r]
Sep 03 13:15:24.62: [ 1757]: --> [2:OK]
Sep 03 13:15:24.62: [ 1757]: <-- [9:AT+FBO=0\r]
Sep 03 13:15:24.73: [ 1757]: --> [2:OK]
Sep 03 13:15:24.73: [ 1757]: <-- [10:AT+FCT=30\r]
Sep 03 13:15:24.84: [ 1757]: --> [2:OK]
Sep 03 13:15:24.84: [ 1757]: <-- [15:AT+FNR=1,1,1,1\r]
Sep 03 13:15:24.95: [ 1757]: --> [2:OK]
Sep 03 13:15:24.95: [ 1757]: <-- [9:AT+FIE=0\r]
Sep 03 13:15:25.06: [ 1757]: --> [2:OK]
Sep 03 13:15:25.06: [ 1757]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
Sep 03 13:15:25.18: [ 1757]: --> [2:OK]
Sep 03 13:15:25.18: [ 1757]: <-- [17:AT+FLI="Labor28"\r]
Sep 03 13:15:25.30: [ 1757]: --> [2:OK]
Sep 03 13:15:25.30: [ 1757]: DIAL 82093309
Sep 03 13:15:25.30: [ 1757]: <-- [15:ATDT0W82093309\r]
Sep 03 13:15:49.33: [ 1757]: --> [4:+FCO]   
Sep 03 13:15:51.20: [ 1757]: --> [27:+FCI:"       49 30 2498814"]
Sep 03 13:15:51.20: [ 1757]: REMOTE CSI "49 30 2498814"
Sep 03 13:15:51.20: [ 1757]: --> [20:+FIS:1,3,0,2,0,0,0,4]
Sep 03 13:15:51.20: [ 1757]: --> [2:OK]
Sep 03 13:15:51.20: [ 1757]: REMOTE best rate 9600 bit/s
Sep 03 13:15:51.20: [ 1757]: REMOTE max page width 1728 pixels in 215 mm
Sep 03 13:15:51.20: [ 1757]: REMOTE max unlimited page length
Sep 03 13:15:51.20: [ 1757]: REMOTE best vres 7.7 line/mm
Sep 03 13:15:51.20: [ 1757]: REMOTE best format 1-D MR
Sep 03 13:15:51.20: [ 1757]: REMOTE best 20 ms, 10 ms/scanline
Sep 03 13:15:51.20: [ 1757]: USE 9600 bit/s
Sep 03 13:15:51.20: [ 1757]: USE 20 ms, 10 ms/scanline
Sep 03 13:15:51.20: [ 1757]: SEND file "docq/doc1394.ps;00"
Sep 03 13:15:51.20: [ 1757]: USE page width 1728 pixels in 215 mm
Sep 03 13:15:51.20: [ 1757]: USE unlimited page length
Sep 03 13:15:51.20: [ 1757]: USE 3.85 line/mm
Sep 03 13:15:51.20: [ 1757]: USE 1-D MR
Sep 03 13:15:51.20: [ 1757]: <-- [23:AT+FIS=0,3,0,2,0,0,0,4\r]
Sep 03 13:15:51.32: [ 1757]: --> [2:OK]
Sep 03 13:15:51.32: [ 1757]: <-- [7:AT+FDT\r]
Sep 03 13:15:57.48: [ 1757]: --> [20:+FCS:0,3,0,2,0,0,0,5]
Sep 03 13:15:57.79: [ 1757]: --> [7:CONNECT]
Sep 03 13:15:57.79: [ 1757]: SEND begin page
Sep 03 13:15:57.79: [ 1757]: <-- data [1027]
Sep 03 13:15:57.79: [ 1757]: <-- data [1030]
Sep 03 13:15:57.79: [ 1757]: <-- data [1024]
Sep 03 13:15:57.79: [ 1757]: <-- data [1024]
Sep 03 13:15:57.79: [ 1757]: <-- data [1024]
Sep 03 13:15:59.80: [ 1757]: <-- data [1024]
Sep 03 13:16:01.25: [ 1757]: <-- data [2]
Sep 03 13:16:01.25: [ 1757]: SENT 6146 bytes of data
Sep 03 13:16:01.25: [ 1757]: SEND 1D RTC
Sep 03 13:16:01.25: [ 1757]: <-- data [9]
Sep 03 13:16:01.25: [ 1757]: SEND end page
Sep 03 13:16:01.25: [ 1757]: SEND send MPS (more pages, same document)
Sep 03 13:16:01.25: [ 1757]: <-- data [2]
Sep 03 13:16:29.07: [ 1757]: --> [2:OK]   
Sep 03 13:16:29.07: [ 1757]: SEND recv MCF (message confirmation)
Sep 03 13:16:29.07: [ 1757]: SEND FAX (00010165): FROM
doering@lmc2.labor28.de TO 82093309 (page 1 of 2 sent in 0:38)
Sep 03 13:16:29.07: [ 1757]: USE page width 1728 pixels in 215 mm
Sep 03 13:16:29.07: [ 1757]: USE unlimited page length
Sep 03 13:16:29.07: [ 1757]: USE 3.85 line/mm
Sep 03 13:16:29.07: [ 1757]: USE 1-D MR
Sep 03 13:16:29.07: [ 1757]: <-- [7:AT+FDT\r]
Sep 03 13:16:29.49: [ 1757]: --> [7:CONNECT]
Sep 03 13:16:29.49: [ 1757]: SEND begin page
Sep 03 13:16:29.49: [ 1757]: <-- data [1028]
Sep 03 13:16:29.49: [ 1757]: <-- data [899]
Sep 03 13:16:29.49: [ 1757]: SENT 1919 bytes of data
Sep 03 13:16:29.49: [ 1757]: SEND 1D RTC
Sep 03 13:16:29.49: [ 1757]: <-- data [9]
Sep 03 13:16:29.49: [ 1757]: SEND end page
Sep 03 13:16:29.49: [ 1757]: SEND send EOP (no more pages or documents)
Sep 03 13:16:29.49: [ 1757]: <-- data [2]
Sep 03 13:16:39.41: [ 1757]: --> [7:+FHS:00]
Sep 03 13:16:39.41: [ 1757]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Sep 03 13:16:39.41: [ 1757]: SEND recv MCF (message confirmation)
Sep 03 13:16:39.41: [ 1757]: SEND FAX (00010165): FROM
doering@lmc2.labor28.de TO 82093309 (page 2 of 2 sent in 0:10)
Sep 03 13:16:39.41: [ 1757]: SEND FAX (00010165): FROM
doering@lmc2.labor28.de TO 82093309 (docq/doc1394.ps;00 sent in 0:48)
Sep 03 13:16:39.41: [ 1757]: <-- [4:ATH\r]
Sep 03 13:16:40.63: [ 1757]: --> [2:OK]
Sep 03 13:16:40.73: [ 1757]: SESSION END

Alex.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*

Prev by Date: [hylafax-users] Can anyone offer/suggest a commercial service to use Hylafax to send a potential large number of different faxes simultaneously?
Next by Date: Re: [hylafax-users] Tif file unopenable when received.
Previous by thread: [hylafax-users] Can anyone offer/suggest a commercial service to use Hylafax to send a potential large number of different faxes simultaneously?
Next by thread: [hylafax-users] Again, receiving squashed faxes...
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services

*****SPAM***** Re: [hylafax-users] automatic paper cutter ignores Formfeed

SPAM Re: [hylafax-users] automatic paper cutter ignores Formfeed