Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Error sending Faxes



On 2002.08.06 05:46 Stefan Dreyer wrote:

> i try to get hylafax together with mica digital modems on a Cisco AS5200
> to work.

> Aug 03 19:15:42.86: [27420]: REMOTE best rate 9600 bit/s
> Aug 03 19:15:42.86: [27420]: REMOTE max page width 1728 pixels in 215 mm
> 
> Aug 03 19:15:42.86: [27420]: REMOTE max unlimited page length
> Aug 03 19:15:42.86: [27420]: REMOTE best vres 7.7 line/mm
> Aug 03 19:15:42.86: [27420]: REMOTE best format 2-D MR
> Aug 03 19:15:42.86: [27420]: REMOTE best 20 ms, 10 ms/scanline
> Aug 03 19:15:42.86: [27420]: USE 9600 bit/s
> Aug 03 19:15:42.86: [27420]: USE 20 ms, 10 ms/scanline
> Aug 03 19:15:42.86: [27420]: SEND file "docq/doc38.ps;41"
> Aug 03 19:15:42.86: [27420]: USE page width 1728 pixels in 215 mm
> Aug 03 19:15:42.86: [27420]: USE unlimited page length
> Aug 03 19:15:42.87: [27420]: USE 7.7 line/mm
> Aug 03 19:15:42.87: [27420]: USE 2-D MR

> Aug 03 19:15:54.49: [27420]: SEND send EOP (no more pages or documents)
> Aug 03 19:15:54.49: [27420]: <-- [9:AT+FET=2\r]
> Aug 03 19:15:57.97: [27420]: --> [7:+FPTS:2]
> Aug 03 19:15:57.97: [27420]: --> [2:OK]
> Aug 03 19:15:57.97: [27420]: SEND recv RTN (retrain negative)

> Aug 03 19:16:09.85: [27420]: SEND send EOP (no more pages or documents)
> Aug 03 19:16:09.85: [27420]: <-- [9:AT+FET=2\r]
> Aug 03 19:16:13.31: [27420]: --> [7:+FPTS:2]
> Aug 03 19:16:13.31: [27420]: --> [2:OK]
> Aug 03 19:16:13.31: [27420]: SEND recv RTN (retrain negative)

> Aug 03 19:16:26.90: [27420]: SEND send EOP (no more pages or documents)
> Aug 03 19:16:26.90: [27420]: <-- [9:AT+FET=2\r]
> Aug 03 19:16:30.35: [27420]: --> [7:+FPTS:2]
> Aug 03 19:16:30.35: [27420]: --> [2:OK]
> Aug 03 19:16:30.35: [27420]: SEND recv RTN (retrain negative)

You are having an RTN problem.  The thing that you need to do is figure 
out why you keep getting RTN back.  If you want to ignore RTN, then you 
can set RTNHandlingMethod.  But, most likely your modems cannot send 2D 
data or some other format type negotiated.  You may want to set Use2D to 
"no" in etc/config and retry.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services