Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Failure to receive silence.



Hi there...

I'm having problems receiving fax on my server; I set "SessionTracing: 0x3ffff" on config.cua0 and get this log:

Aug 05 15:08:53.76: [ 1740]: SESSION BEGIN 00000026 5511551141538484
Aug 05 15:08:53.76: [ 1740]: HylaFAX (tm) Version 4.1.3
Aug 05 15:08:53.76: [ 1740]: <-- [4:ATA\r]
Aug 05 15:08:56.77: [ 1740]: --> [7:CONNECT]
Aug 05 15:08:56.77: [ 1740]: ANSWER: FAX CONNECTION  DEVICE '/dev/cua0'
Aug 05 15:08:56.77: [ 1740]: STATE CHANGE: ANSWERING -> RECEIVING
Aug 05 15:08:56.77: [ 1740]: MODEM input buffering enabled
Aug 05 15:08:56.77: [ 1740]: RECV FAX: begin
Aug 05 15:08:56.77: [ 1740]: MODEM input buffering disabled
Aug 05 15:08:56.77: [ 1740]: <-- HDLC<23:FF C0 02 36 A6 96 76 86 22 A6 2E CE A6 2A 04 04 04 04 04 04 04 04 04>
Aug 05 15:08:56.77: [ 1740]: <-- data [23]
Aug 05 15:08:56.77: [ 1740]: <-- data [2]
Aug 05 15:08:57.90: [ 1740]: --> [7:CONNECT]
Aug 05 15:08:57.90: [ 1740]: <-- HDLC<10:FF C8 01 00 77 5F 01 79 03 C0>
Aug 05 15:08:57.90: [ 1740]: <-- data [10]
Aug 05 15:08:57.90: [ 1740]: <-- data [2]
Aug 05 15:08:58.35: [ 1740]: --> [2:OK]
Aug 05 15:08:58.35: [ 1740]: <-- [9:AT+FRH=3\r]
Aug 05 15:08:58.73: [ 1740]: --> [7:CONNECT]
Aug 05 15:09:00.48: [ 1740]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 CC CC 0C EC CC 4C 4C EC 37 11>
Aug 05 15:09:00.48: [ 1740]: --> [2:OK]
Aug 05 15:09:00.48: [ 1740]: REMOTE TSI "72237033"
Aug 05 15:09:00.48: [ 1740]: <-- [9:AT+FRH=3\r]
Aug 05 15:09:00.51: [ 1740]: --> [7:CONNECT]
Aug 05 15:09:00.77: [ 1740]: --> HDLC<8:FF C8 C1 00 61 1E 9A 31>
Aug 05 15:09:00.77: [ 1740]: --> [2:OK]
Aug 05 15:09:00.77: [ 1740]: REMOTE wants 9600 bit/s
Aug 05 15:09:00.77: [ 1740]: REMOTE wants page width 1728 pixels in 215 mm
Aug 05 15:09:00.77: [ 1740]: REMOTE wants unlimited page length 
Aug 05 15:09:00.77: [ 1740]: REMOTE wants 3.85 line/mm
Aug 05 15:09:00.77: [ 1740]: REMOTE wants 2-D MR
Aug 05 15:09:00.77: [ 1740]: RECV training at v.29 9600 bit/s
Aug 05 15:09:00.77: [ 1740]: <-- [10:AT+FRM=96\r]
Aug 05 15:09:01.35: [ 1740]: --> [7:CONNECT]
Aug 05 15:09:02.89: [ 1740]: RECV: TCF 1824 bytes, 0% non-zero, 1810 zero-run
Aug 05 15:09:02.90: [ 1740]: --> [10:NO CARRIER]
Aug 05 15:09:02.90: [ 1740]: DELAY 75 ms
Aug 05 15:09:02.98: [ 1740]: TRAINING succeeded
Aug 05 15:09:02.98: [ 1740]: <-- [9:AT+FTH=3\r]
Aug 05 15:09:03.02: [ 1740]: --> [7:CONNECT]
Aug 05 15:09:03.02: [ 1740]: <-- HDLC<3:FF C8 21>
Aug 05 15:09:03.02: [ 1740]: <-- data [3]
Aug 05 15:09:03.02: [ 1740]: <-- data [2]
Aug 05 15:09:03.76: [ 1740]: --> [2:OK]
Aug 05 15:09:03.76: [ 1740]: MODEM input buffering enabled
Aug 05 15:09:03.76: [ 1740]: <-- [10:AT+FRM=96\r]
Aug 05 15:09:04.54: [ 1740]: --> [7:CONNECT]
Aug 05 15:09:04.54: [ 1740]: RECV: begin page
Aug 05 15:09:25.52: [ 1740]: RECV/CQ: Bad 1D pixel count, row 1162, got 0, expected 1728
Aug 05 15:09:25.52: [ 1740]: RECV/CQ: Bad 1D pixel count, row 1163, got 0, expected 1728
Aug 05 15:09:25.52: [ 1740]: RECV/CQ: Bad 1D pixel count, row 1164, got 0, expected 1728
Aug 05 15:09:25.52: [ 1740]: RECV/CQ: Bad 1D pixel count, row 1165, got 0, expected 1728
Aug 05 15:09:25.52: [ 1740]: RECV/CQ: Bad 1D pixel count, row 1166, got 0, expected 1728
Aug 05 15:09:25.52: [ 1740]: RECV/CQ: Bad 1D pixel count, row 1167, got 27, expected 1728
Aug 05 15:09:25.52: [ 1740]: RECV/CQ: Adjusting for trailing noise (6 run)
Aug 05 15:09:25.52: [ 1740]: RECV: 1162 total lines, 0 bad lines, 0 consecutive bad lines
Aug 05 15:09:25.52: [ 1740]: RECV: end page
Aug 05 15:09:25.52: [ 1740]: --> [10:NO CARRIER]
Aug 05 15:09:25.52: [ 1740]: MODEM input buffering disabled
Aug 05 15:09:25.52: [ 1740]: <-- [9:AT+FRH=3\r]
Aug 05 15:09:25.57: [ 1740]: --> [7:CONNECT]
Aug 05 15:09:26.74: [ 1740]: --> HDLC<5:FF C8 F4 CC 66>
Aug 05 15:09:26.74: [ 1740]: --> [2:OK]
Aug 05 15:09:26.74: [ 1740]: RECV recv EOP (no more pages or documents)
Aug 05 15:09:26.74: [ 1740]: <-- [9:AT+FRS=7\r]
Aug 05 15:09:56.74: [ 1740]: MODEM TIMEOUT: reading line from modem
Aug 05 15:09:56.74: [ 1740]: MODEM <Timeout>
Aug 05 15:09:56.74: [ 1740]: RECV FAX (00000026): recvq/fax00022.tif from 72237033, route to <unspecified>, 0 pages in 1:00
Aug 05 15:09:56.74: [ 1740]: RECV FAX: Failure to receive silence.
Aug 05 15:09:56.74: [ 1740]: <-- [9:AT+FTH=3\r]
Aug 05 15:09:56.75: [ 1740]: --> [2:OK]
Aug 05 15:09:56.75: [ 1740]: MODEM input buffering enabled
Aug 05 15:09:56.75: [ 1740]: RECV FAX (00000026): session with 72237033 terminated abnormally: Failure to receive silence.
Aug 05 15:09:56.75: [ 1740]: RECV FAX: bin/faxrcvd "recvq/fax00022.tif" "cua0" "00000026" "Failure to receive silence." "" ""
Aug 05 15:09:56.91: [ 1740]: RECV FAX: end
Aug 05 15:09:56.91: [ 1740]: SESSION END

I don't know what is happening... I tried many things, but didn't find anything on the net (I used google to search the error messages and other configurations).

With cu, I get these things:

# cu -l cua0
Connected.
at+fclass=?
0,1,8
OK
ati0
1.0
OK
ati1
CD08.55 - 623a (02/02/2000) SERIAL - SPEAKERPHONE 05 - DSP PATCH: 001.55
OK
ati2
ROM TEST OK
OK
ati3
MD56xx
OK
ati4
AMBIENT TECHNOLOGIES INC. ENGINEERING  FIRMWARE DEPARTMENT 
OK
ati5
Present, 32K DSP RAM.000
Host I/F: Serial
P. Mem. : 008 Bit 001 W.S. 
D. Mem  : 008 Bit 001 W.S. 
DSP code location = INT ROM
OK
ati6
USA 1
OK
ati7
AMBIENT TECHNOLOGIES INC. ENGINEERING  FIRMWARE DEPARTMENT 
OK
~.
Disconnected.

+----------------------+
| Daniel Cristian Cruz |
+----------------------+

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@hylafax.org.*



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services