[hylafax-users] REMOTE HANGUP: Unspecified Transmit Phase D error

[Paul Taylor <paul.taylor@macro4.com>]

Dear Hylafax

 

We have been evaluating the following on our Linux system:-

 

HylaFAX v4.12 under SuSe Linux 2.2.7; 3Com/USRobotics Courier V.Everything modem model 3CP013453. The modem's firmware is:-

 

Supervisor date        05/03/00

DSP date                03/16/00

Supervisor rev          1.0.6

DSP rev                  1.1.9

DAA rev                  0013

 

When sending a fax we never get a clean "FHS:00" termination only the following:-

 

Jul 29 09:22:04.66: [10696]: --> [20:+FCS:0,5,0,2,0,0,0,3]
Jul 29 09:22:11.45: [10696]: --> [7:CONNECT]
Jul 29 09:22:11.45: [10696]: SEND begin page
Jul 29 09:22:11.46: [10696]: <-- data [1026]
Jul 29 09:22:11.46: [10696]: <-- data [1027]
Jul 29 09:22:11.46: [10696]: <-- data [1031]
Jul 29 09:22:11.46: [10696]: <-- data [1025]
Jul 29 09:22:11.46: [10696]: <-- data [1025]
Jul 29 09:22:13.45: [10696]: <-- data [31]
Jul 29 09:22:13.45: [10696]: SENT 5151 bytes of data
Jul 29 09:22:13.45: [10696]: SEND 1D RTC
Jul 29 09:22:13.45: [10696]: <-- data [9]
Jul 29 09:22:13.45: [10696]: SEND end page
Jul 29 09:22:13.45: [10696]: SEND send EOP (no more pages or documents)
Jul 29 09:22:13.45: [10696]: <-- data [2]
Jul 29 09:25:13.44: [10696]: REMOTE HANGUP: Unspecified Transmit Phase D error, including +FPHCTO timeout between data and +FET command (code 50)

 

If we use a USRobotics 56k Faxmodem, we always get a clean FHS:00

 

Are we doing something wrong or is the modem we are using not right?

 

Best wishes

 

Paul

Paul Taylor 
Support Engineer - Business Information Logistics, Macro 4
mailto:open.support@macro4.com
http://www.macro4.com

Macro 4 plc, The Orangery, Turners Hill Road, Worth, Crawley, RH10 4SS, UK
Direct Line: +44 (0)1293 872190 Switchboard: +44 (0) 1293 872000 Fax: +44 (0) 1293 872001

This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.

E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. This message is provided for informational purposes and should not be construed as a solicitation, offer or acceptance of any offer.