Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Send 1 Fax, Then Can Never Receive



Hi,

I had the same problem and all I did was configuring the modem in „Class 
2“. After that the problem was solved.

Regards,

Martin

>>>>>>>>>>>>>>>>>> Ursprüngliche Nachricht <<<<<<<<<<<<<<<<<<

Am 27.07.2002, 16:12:59, schrieb "Bestia" <bestia@lanstation.it> zum Thema 
[hylafax-users] Send 1 Fax, Then Can Never Receive:


> At last, after weeks of trying hard to solve this one by myself, I 
decided
> to post on the list, crying for help!
> My HylaFAX installation works almost fine...I can actually send and
> receive faxes. I can also send faxes from other PCs in the LAN (both from
> Linux boxes running GFax and from Windwos boxes running whfc)...This
> probably means that I don't have huge hardware or software configuration
> issues.
> The thing is...that after I send a fax, HylaFAX never returns to the 
state
> of "Running and idle", instead faxstat keep saying "Waiting for modem to
> come ready"...DTR is set OFF by FaxSend, and nothing happens after fax is
> succesfully sent. Obviously in this situation, the modem cannot receive
> faxes. So, I always have to kill faxgetty manually, faxgetty respawns and
> take control of the serial line re-initializing the modem...
> I believe this is due to the fact that - for some strange reason -
> faxgetty does not realize that the faxsend job is over and that he has to
> set the modem DTR on, because faxsend just leaves DTR set to off.
> I usually send 5 faxes and receive 6-8 faxes a day...So I cannot simply
> stay in the office all day making sure that the system.
> Please help!!!!

> Now, the facts:
> 1) OS: RedHat Linux 7.3 running on i386
> 2) Hylafax Version: HylaFAX RPM version 4.1.2-rh7
> 3) Modem (external): MODEM USR U.S. Robotics 56K Message Rev. 12.1.12

> The faxgetty entry in my /etc/inittab is the following:
> S1:235:respawn:/usr/sbin/faxgetty ttyS1

> My /var/spool/hylafax/etc/config.ttyS1 is taken from the template Id:
> usr-xon,v 1.6 2002/04/07 20:29:27 darren. I have basically added just the
> last line:
> CountryCode:          XX
> AreaCode:             XXX
> FAXNumber:            +XX.XXX.XXXXXX
> LongDistancePrefix:   0
> InternationalPrefix:  00
> DialStringRules:      etc/dialrules
> ServerTracing:                0x0f
> SessionTracing:               0xFFF
> RecvFileMode:         0666
> LogFileMode:          0600
> DeviceMode:           0600
> RingsBeforeAnswer:    2
> SpeakerVolume:                low
> GettyArgs:            "-h %l dx_%s"
> LocalIdentifier:      "MyCompanyName"
> TagLineFont:          etc/lutRS18.pcf
> TagLineFormat:                "From %%l|%c|Page %%P of %%T"
> MaxRecvPages:         25
> UUCPLockDir:          /var/lock

> ModemType:            Class1          # use class 1 interface
> ModemRate:            19200           # rate for DCE-DTE communication
> ModemFlowControl:     xonxoff         # hardware flow control

> ModemSetupDTRCmd:     ATS13=1&D2      # setup so DTR drop resets modem
> ModemSetupDCDCmd:     AT&C1           # setup so DCD reflects carrier (or 
not)
> ModemNoFlowCmd:               AT&H0&I0&R1     # setup modem for no flow 
control
> ModemHardFlowCmd:     AT&H1&I0&R2     # setup modem for hardware flow 
control
> ModemSoftFlowCmd:     AT&H2&I2&R1     # setup modem for software flow 
control
> ModemResultCodesCmd:  ATQ0X4          # enable result codes

> ModemMfrQueryCmd:     !USR
> ModemModelQueryCmd:   ATI3
> ModemRevQueryCmd:     ATI7            # XXX returns a multi-line result

> Class1NFLOCmd:                AT&H0&I0&R1     # setup modem for no flow 
control
> Class1HFLOCmd:                AT&H1&I0&R2     # setup modem for hardware 
flow control
> Class1SFLOCmd:                ""              # modem does this 
automatically

> ModemSetupAACmd:      AT+FCLASS=0     # leave modem idling in class 0
> ModemAnswerCmd:               AT+FCLASS=1A    # answer in Class 1
> Class2NRCmd:          AT+FNR=1,1,1,0

> ModemDialCmd:         ATX3DT%s          # T for tone dialing, @ for 
silence

> In the following log you can analize a session where I send a fax out and
> the I have to kill the faxgetty process because the modem does not go 
back
> to DTR ON.

> lug 27 15:58:54 fax FaxQueuer[11811]: SUBMIT JOB 158
> lug 27 15:59:05 fax FaxSend[11950]: MODEM set DTR OFF
> lug 27 15:59:05 fax FaxSend[11950]: DELAY 75 ms
> lug 27 15:59:05 fax FaxSend[11950]: MODEM set DTR ON
> lug 27 15:59:05 fax FaxSend[11950]: DELAY 2600 ms
> lug 27 15:59:08 fax FaxSend[11950]: MODEM set baud rate: 19200 baud, 
input
> flow XON/XOFF, output flow XON/XOFFlug 27 15:59:08 fax FaxSend[11950]: 
MODEM flush i/o
> lug 27 15:59:08 fax FaxSend[11950]: <-- [4:ATZ\r]
> lug 27 15:59:08 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:08 fax FaxSend[11950]: DELAY 3000 ms
> lug 27 15:59:11 fax FaxSend[11950]: <-- [5:ATE0\r]
> lug 27 15:59:11 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:11 fax FaxSend[11950]: <-- [5:ATV1\r]
> lug 27 15:59:12 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:12 fax FaxSend[11950]: <-- [7:ATQ0X4\r]
> lug 27 15:59:12 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:12 fax FaxSend[11950]: <-- [7:ATS0=0\r]
> lug 27 15:59:12 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:12 fax FaxSend[11950]: <-- [7:ATS8=2\r]
> lug 27 15:59:12 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:12 fax FaxSend[11950]: <-- [8:ATS7=60\r]
> lug 27 15:59:13 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:13 fax FaxSend[11950]: <-- [12:AT&H2&I2&R1\r]
> lug 27 15:59:13 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:13 fax FaxSend[11950]: <-- [11:ATS13=1&D2\r]
> lug 27 15:59:13 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:13 fax FaxSend[11950]: <-- [6:AT&C1\r]
> lug 27 15:59:13 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:13 fax FaxSend[11950]: <-- [12:AT+FCLASS=?\r]
> lug 27 15:59:14 fax FaxSend[11950]: --> [7:0,1,2.0]
> lug 27 15:59:14 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:14 fax FaxSend[11950]: <-- [12:AT+FCLASS=1\r]
> lug 27 15:59:14 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:14 fax FaxSend[11950]: <-- [5:ATI3\r]
> lug 27 15:59:14 fax FaxSend[11950]: --> [38:U.S. Robotics 56K Message Rev.
> 12.1.12]lug 27 15:59:14 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:14 fax FaxSend[11950]: <-- [5:ATI7\r]
> lug 27 15:59:14 fax FaxSend[11950]: --> [24:Configuration Profile...]
> lug 27 15:59:14 fax FaxSend[11950]: --> [37:Product type           Italy
> External]lug 27 15:59:14 fax FaxSend[11950]: --> [31:Product ID:            
13206800]
> lug 27 15:59:14 fax FaxSend[11950]: --> [43:Options
> V32bis,V.34+,x2,V.90]lug 27 15:59:14 fax FaxSend[11950]: --> [40:Fax 
Options            Class
> 1/Class 2.0]lug 27 15:59:14 fax FaxSend[11950]: --> [41:Voice Options       
   Speaker
> Phone, TAD]lug 27 15:59:14 fax FaxSend[11950]: --> [30:Clock Freq           
  92.0Mhz]
> lug 27 15:59:14 fax FaxSend[11950]: --> [27:EPROM                  256k]
> lug 27 15:59:14 fax FaxSend[11950]: --> [26:RAM                    32k]
> lug 27 15:59:14 fax FaxSend[11950]: --> [30:FLASH date             2/13/98]
> lug 27 15:59:14 fax FaxSend[11950]: --> [30:FLASH rev              12.1.12]
> lug 27 15:59:15 fax FaxSend[11950]: --> [30:DSP date               2/13/98]
> lug 27 15:59:15 fax FaxSend[11950]: --> [30:DSP rev                12.1.12]
> lug 27 15:59:15 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:15 fax FaxSend[11950]: <-- [9:AT+FTM=?\r]
> lug 27 15:59:15 fax FaxSend[11950]: -->
> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]lug 27 15:59:15 fax 
FaxSend[11950]: --> [2:OK]
> lug 27 15:59:15 fax FaxSend[11950]: <-- [9:AT+FRM=?\r]
> lug 27 15:59:15 fax FaxSend[11950]: -->
> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]lug 27 15:59:15 fax 
FaxSend[11950]: --> [2:OK]
> lug 27 15:59:15 fax FaxSend[11950]: <-- [12:AT+FCLASS=1\r]
> lug 27 15:59:16 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:16 fax FaxSend[11950]: <-- [12:AT+FCLASS=0\r]
> lug 27 15:59:16 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:16 fax FaxSend[11950]: MODEM USR U.S. Robotics 56K Message
> Rev. 12.1.12/Configuration Profile... Product type           Italy
> External Product ID:            13206800 Options
> V32bis,V.34+,x2,V.90 Fax Options            Class 1/Class 2.0 Voice
> Options          Speaker Phone, TAD Clock Freq             92.0Mhz EPROM
>                256k RAM                    32k FLASH date
> 2/13/98 FLASH rev              12.1.12 DSP date               2/13/98 DSP
> rev                12.1.12lug 27 15:59:16 fax FaxSend[11950]: <-- 
[7:ATL1M1\r]
> lug 27 15:59:16 fax FaxSend[11950]: --> [2:OK]
> lug 27 15:59:16 fax FaxSend[11950]: MODEM input buffering disabled
> lug 27 15:59:16 fax FaxSend[11950]: SEND FAX: JOB 158 DEST
> 1088003534680300 COMMID 00000438 DEVICE '/dev/ttyS1'lug 27 15:59:59 fax 
FaxSend[11950]: SEND FAX: JOB 158 SENT in 0:11
> Jul 27 16:00:54 fax FaxGetty[11827]: CAUGHT SIGNAL 15
> Jul 27 16:00:54 fax FaxGetty[11827]: CLOSE /dev/ttyS1
> Jul 27 16:00:54 fax FaxGetty[11827]: <-- [5:ATH0\r]
> Jul 27 16:00:59 fax FaxGetty[11827]: MODEM TIMEOUT: reading line from 
modem
> Jul 27 16:00:59 fax FaxGetty[11827]: MODEM <Timeout>
> Jul 27 16:00:59 fax FaxGetty[11827]: MODEM set DTR OFF
> Jul 27 16:00:59 fax FaxGetty[11986]: OPEN /dev/ttyS1  HylaFAX (tm) 
Version
> 4.1.2Jul 27 16:00:59 fax FaxGetty[11986]: MODEM set DTR OFF
> Jul 27 16:00:59 fax FaxGetty[11986]: DELAY 75 ms
> Jul 27 16:00:59 fax FaxGetty[11986]: MODEM set DTR ON
> Jul 27 16:00:59 fax FaxGetty[11986]: DELAY 2600 ms
> Jul 27 16:01:02 fax FaxGetty[11986]: MODEM set baud rate: 19200 baud,
> input flow XON/XOFF, output flow XON/XOFFJul 27 16:01:02 fax 
FaxGetty[11986]: MODEM flush i/o
> Jul 27 16:01:02 fax FaxGetty[11986]: <-- [4:ATZ\r]
> Jul 27 16:01:02 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:02 fax FaxGetty[11986]: DELAY 3000 ms
> Jul 27 16:01:05 fax FaxGetty[11986]: <-- [5:ATE0\r]
> Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:06 fax FaxGetty[11986]: <-- [5:ATV1\r]
> Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:06 fax FaxGetty[11986]: <-- [7:ATQ0X4\r]
> Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:06 fax FaxGetty[11986]: <-- [7:ATS0=0\r]
> Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:06 fax FaxGetty[11986]: <-- [7:ATS8=2\r]
> Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:06 fax FaxGetty[11986]: <-- [8:ATS7=60\r]
> Jul 27 16:01:07 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:07 fax FaxGetty[11986]: <-- [12:AT&H2&I2&R1\r]
> Jul 27 16:01:07 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:07 fax FaxGetty[11986]: <-- [11:ATS13=1&D2\r]
> Jul 27 16:01:07 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:07 fax FaxGetty[11986]: <-- [6:AT&C1\r]
> Jul 27 16:01:07 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:07 fax FaxGetty[11986]: <-- [12:AT+FCLASS=?\r]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [7:0,1,2.0]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:08 fax FaxGetty[11986]: <-- [12:AT+FCLASS=1\r]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:08 fax FaxGetty[11986]: <-- [5:ATI3\r]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [38:U.S. Robotics 56K Message
> Rev. 12.1.12]Jul 27 16:01:08 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:08 fax FaxGetty[11986]: <-- [5:ATI7\r]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [24:Configuration Profile...]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [37:Product type           Italy
> External]Jul 27 16:01:08 fax FaxGetty[11986]: --> [31:Product ID:           
 13206800]
> Jul 27 16:01:08 fax FaxGetty[11986]: --> [43:Options
> V32bis,V.34+,x2,V.90]Jul 27 16:01:08 fax FaxGetty[11986]: --> [40:Fax 
Options            Class
> 1/Class 2.0]Jul 27 16:01:08 fax FaxGetty[11986]: --> [41:Voice Options
> Speaker Phone, TAD]Jul 27 16:01:08 fax FaxGetty[11986]: --> [30:Clock Freq  
           92.0Mhz]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [27:EPROM                  256k]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [26:RAM                    32k]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [30:FLASH date             
2/13/98]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [30:FLASH rev              
12.1.12]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [30:DSP date               
2/13/98]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [30:DSP rev                
12.1.12]
> Jul 27 16:01:09 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:09 fax FaxGetty[11986]: <-- [9:AT+FTM=?\r]
> Jul 27 16:01:09 fax FaxGetty[11986]: -->
> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]Jul 27 16:01:09 fax 
FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:09 fax FaxGetty[11986]: <-- [9:AT+FRM=?\r]
> Jul 27 16:01:09 fax FaxGetty[11986]: -->
> [41:3,24,48,72,73,74,96,97,98,121,122,145,146]Jul 27 16:01:10 fax 
FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:10 fax FaxGetty[11986]: <-- [12:AT+FCLASS=1\r]
> Jul 27 16:01:10 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:10 fax FaxGetty[11986]: <-- [12:AT+FCLASS=0\r]
> Jul 27 16:01:10 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:10 fax FaxGetty[11986]: MODEM USR U.S. Robotics 56K Message
> Rev. 12.1.12/Configuration Profile... Product type           Italy
> External Product ID:            13206800 Options
> V32bis,V.34+,x2,V.90 Fax Options            Class 1/Class 2.0 Voice
> Options          Speaker Phone, TAD Clock Freq             92.0Mhz EPROM
>                256k RAM                    32k FLASH date
> 2/13/98 FLASH rev              12.1.12 DSP date               2/13/98 DSP
> rev                12.1.12Jul 27 16:01:10 fax FaxGetty[11986]: <-- 
[7:ATL1M1\r]
> Jul 27 16:01:10 fax FaxGetty[11986]: --> [2:OK]
> Jul 27 16:01:10 fax FaxGetty[11986]: MODEM input buffering disabled

> Also, you may want to check the relevant transmition log:

> lug 27 15:59:16.64: [11950]: SESSION BEGIN 00000438 395741088003534680300
> lug 27 15:59:16.64: [11950]: HylaFAX (tm) Version 4.1.2
> lug 27 15:59:16.64: [11950]: SEND FAX: JOB 158 DEST 1088003534680300
> COMMID 00000438 DEVICE '/dev/ttyS1'lug 27 15:59:16.64: [11950]: MODEM set 
DTR OFF
> lug 27 15:59:16.64: [11950]: DELAY 75 ms
> lug 27 15:59:16.72: [11950]: MODEM set DTR ON
> lug 27 15:59:16.72: [11950]: DELAY 2600 ms
> lug 27 15:59:19.32: [11950]: MODEM set baud rate: 19200 baud, input flow
> XON/XOFF, output flow XON/XOFFlug 27 15:59:19.32: [11950]: MODEM flush 
i/o
> lug 27 15:59:19.32: [11950]: <-- [4:ATZ\r]
> lug 27 15:59:19.46: [11950]: --> [2:OK]
> lug 27 15:59:19.46: [11950]: DELAY 3000 ms
> lug 27 15:59:22.46: [11950]: <-- [5:ATE0\r]
> lug 27 15:59:22.60: [11950]: --> [2:OK]
> lug 27 15:59:22.60: [11950]: <-- [5:ATV1\r]
> lug 27 15:59:22.74: [11950]: --> [2:OK]
> lug 27 15:59:22.74: [11950]: <-- [7:ATQ0X4\r]
> lug 27 15:59:22.88: [11950]: --> [2:OK]
> lug 27 15:59:22.88: [11950]: <-- [7:ATS0=0\r]
> lug 27 15:59:23.02: [11950]: --> [2:OK]
> lug 27 15:59:23.02: [11950]: <-- [7:ATS8=2\r]
> lug 27 15:59:23.16: [11950]: --> [2:OK]
> lug 27 15:59:23.16: [11950]: <-- [8:ATS7=60\r]
> lug 27 15:59:23.30: [11950]: --> [2:OK]
> lug 27 15:59:23.30: [11950]: <-- [12:AT&H2&I2&R1\r]
> lug 27 15:59:23.44: [11950]: --> [2:OK]
> lug 27 15:59:23.44: [11950]: <-- [11:ATS13=1&D2\r]
> lug 27 15:59:23.58: [11950]: --> [2:OK]
> lug 27 15:59:23.58: [11950]: <-- [6:AT&C1\r]
> lug 27 15:59:23.72: [11950]: --> [2:OK]
> lug 27 15:59:23.72: [11950]: <-- [12:AT+FCLASS=1\r]
> lug 27 15:59:23.86: [11950]: <-- [12:AT+FCLASS=0\r]
> lug 27 15:59:24.00: [11950]: --> [2:OK]
> lug 27 15:59:24.00: [11950]: <-- [7:ATL1M1\r]
> lug 27 15:59:24.14: [11950]: --> [2:OK]
> lug 27 15:59:24.14: [11950]: STATE CHANGE: RUNNING -> SENDING
> lug 27 15:59:24.14: [11950]: MODEM input buffering enabled
> lug 27 15:59:24.14: [11950]: <-- [12:AT+FCLASS=1\r]
> lug 27 15:59:24.39: [11950]: --> [2:OK]
> lug 27 15:59:24.39: [11950]: MODEM set XON/XOFF/FLUSH: input ignored,
> output disabledlug 27 15:59:24.40: [11950]: DIAL 1088003534680300
> lug 27 15:59:24.40: [11950]: <-- [23:ATX3DT1088003534680300\r]
> lug 27 15:59:45.79: [11950]: --> [7:CONNECT]
> lug 27 15:59:45.79: [11950]: MODEM input buffering disabled
> lug 27 15:59:47.63: [11950]: --> HDLC<41:FF C0 04 00 00 88 01 00 51 92 08
> EA A2 32 32 B2 82 72 04 92 72 2A A2 4A 72 82 2A 00 F2 00 01 01 1B 71 80 
80
> 80 80 20 0B 90>lug 27 15:59:47.63: [11950]: --> [2:OK]
> lug 27 15:59:47.63: [11950]: REMOTE NSF "00 00 11 80 00 8A 49 10 57 45 4C
> 4C 4D 41 4E 20 49 4E 54 45 52 4E 41 54 00 4F 00 80 80 D8 8E 01 01 01 01 
04
> D0"lug 27 15:59:47.63: [11950]: NSF remote fax equipment: XXX
> lug 27 15:59:47.63: [11950]: NSF remote station ID: "XXX"
> lug 27 15:59:47.63: [11950]: <-- [9:AT+FRH=3\r]
> lug 27 15:59:47.65: [11950]: --> [7:CONNECT]
> lug 27 15:59:48.32: [11950]: --> HDLC<25:FF C0 02 0C 0C CC 0C 1C 6C 2C 0C
> 04 04 04 04 04 04 04 04 04 04 04 04 3C A2>lug 27 15:59:48.32: [11950]: --> 
[2:OK]
> lug 27 15:59:48.32: [11950]: REMOTE CSI "04680300"
> lug 27 15:59:48.32: [11950]: <-- [9:AT+FRH=3\r]
> lug 27 15:59:48.34: [11950]: --> [7:CONNECT]
> lug 27 15:59:48.59: [11950]: --> HDLC<9:FF C8 01 00 77 15 22 17 5D>
> lug 27 15:59:48.59: [11950]: --> [2:OK]
> lug 27 15:59:48.59: [11950]: REMOTE best rate 14400 bit/s
> lug 27 15:59:48.59: [11950]: REMOTE max page width 1728 pixels in 215 mm
> lug 27 15:59:48.59: [11950]: REMOTE max unlimited page length
> lug 27 15:59:48.59: [11950]: REMOTE best vres 7.7 line/mm
> lug 27 15:59:48.59: [11950]: REMOTE best format 2-D MMR
> lug 27 15:59:48.59: [11950]: REMOTE supports T.30 Annex A, ECM
> lug 27 15:59:48.59: [11950]: REMOTE best 10 ms/scanline
> lug 27 15:59:48.59: [11950]: USE 14400 bit/s
> lug 27 15:59:48.60: [11950]: USE 10 ms/scanline
> lug 27 15:59:48.60: [11950]: SEND file "docq/doc163.ps;70"
> lug 27 15:59:48.60: [11950]: USE page width 1728 pixels in 215 mm
> lug 27 15:59:48.60: [11950]: USE unlimited page length
> lug 27 15:59:48.60: [11950]: USE 3.85 line/mm
> lug 27 15:59:48.60: [11950]: USE 2-D MR
> lug 27 15:59:48.60: [11950]: SEND training at v.17 14400 bit/s
> lug 27 15:59:48.60: [11950]: <-- [9:AT+FTH=3\r]
> lug 27 15:59:48.80: [11950]: --> [7:CONNECT]
> lug 27 15:59:48.80: [11950]: <-- HDLC<23:FF C0 C2 CE 86 CA 04 36 2E 76 92
> B4 9E A6 76 86 16 C2 04 04 04 04 04>lug 27 15:59:48.80: [11950]: <-- data 
[23]
> lug 27 15:59:48.80: [11950]: <-- data [2]
> lug 27 15:59:48.83: [11950]: --> [7:CONNECT]
> lug 27 15:59:48.83: [11950]: <-- HDLC<6:FF C8 C1 00 45 14>
> lug 27 15:59:48.83: [11950]: <-- data [6]
> lug 27 15:59:48.83: [11950]: <-- data [2]
> lug 27 15:59:50.78: [11950]: --> [2:OK]
> lug 27 15:59:50.78: [11950]: <-- [9:AT+FTS=7\r]
> lug 27 15:59:50.87: [11950]: --> [2:OK]
> lug 27 15:59:50.87: [11950]: MODEM set XON/XOFF/FLUSH: input interpreted,
> output disabledlug 27 15:59:50.87: [11950]: <-- [11:AT+FTM=145\r]
> lug 27 15:59:52.35: [11950]: --> [7:CONNECT]
> lug 27 15:59:52.35: [11950]: <-- data [1024]
> lug 27 15:59:52.35: [11950]: <-- data [1024]
> lug 27 15:59:52.35: [11950]: <-- data [652]
> lug 27 15:59:52.35: [11950]: <-- data [2]
> lug 27 15:59:53.88: [11950]: --> [2:OK]
> lug 27 15:59:53.88: [11950]: MODEM set XON/XOFF/DRAIN: input ignored,
> output disabledlug 27 15:59:53.88: [11950]: <-- [9:AT+FRH=3\r]
> lug 27 15:59:54.14: [11950]: --> [7:CONNECT]
> lug 27 15:59:55.23: [11950]: --> HDLC<5:FF C8 21 57 BE>
> lug 27 15:59:55.23: [11950]: --> [2:OK]
> lug 27 15:59:55.23: [11950]: TRAINING succeeded
> lug 27 15:59:55.23: [11950]: DELAY 75 ms
> lug 27 15:59:55.31: [11950]: <-- [11:AT+FTM=146\r]
> lug 27 15:59:55.57: [11950]: --> [7:CONNECT]
> lug 27 15:59:55.57: [11950]: SEND begin page
> lug 27 15:59:55.57: [11950]: MODEM set XON/XOFF/FLUSH: input interpreted,
> output disabledlug 27 15:59:55.58: [11950]: <-- data [1025]
> lug 27 15:59:55.58: [11950]: <-- data [1029]
> lug 27 15:59:55.58: [11950]: <-- data [570]
> lug 27 15:59:55.58: [11950]: SENT 2615 bytes of data
> lug 27 15:59:55.58: [11950]: SEND 2D RTC
> lug 27 15:59:55.58: [11950]: <-- data [30]
> lug 27 15:59:55.58: [11950]: <-- data [2]
> lug 27 15:59:55.58: [11950]: SEND end page
> lug 27 15:59:57.07: [11950]: --> [2:OK]
> lug 27 15:59:57.07: [11950]: MODEM set XON/XOFF/DRAIN: input ignored,
> output disabledlug 27 15:59:57.07: [11950]: <-- [9:AT+FTS=9\r]
> lug 27 15:59:57.18: [11950]: --> [2:OK]
> lug 27 15:59:57.18: [11950]: SEND send EOP (no more pages or documents)
> lug 27 15:59:57.18: [11950]: <-- [9:AT+FTH=3\r]
> lug 27 15:59:57.34: [11950]: --> [7:CONNECT]
> lug 27 15:59:57.34: [11950]: <-- HDLC<3:FF C8 F4>
> lug 27 15:59:57.34: [11950]: <-- data [3]
> lug 27 15:59:57.34: [11950]: <-- data [2]
> lug 27 15:59:58.52: [11950]: --> [2:OK]
> lug 27 15:59:58.52: [11950]: <-- [9:AT+FRH=3\r]
> lug 27 15:59:58.94: [11950]: --> [7:CONNECT]
> lug 27 15:59:59.82: [11950]: --> HDLC<5:FF C8 31 45 8F>
> lug 27 15:59:59.82: [11950]: --> [2:OK]
> lug 27 15:59:59.82: [11950]: SEND recv MCF (message confirmation)
> lug 27 15:59:59.83: [11950]: SEND FAX (00000438): FROM lore@fax TO
> 1088xxxxxxxxx (page 1 of 1 sent in 0:11)lug 27 15:59:59.83: [11950]: SEND 
FAX (00000438): FROM lore@fax TO
> 1088xxxxxxxxx (docq/doc163.ps;70 sent in 0:11)lug 27 15:59:59.83: 
[11950]: <-- [9:AT+FTH=3\r]
> lug 27 16:00:00.03: [11950]: --> [7:CONNECT]
> lug 27 16:00:00.03: [11950]: <-- HDLC<3:FF C8 DF>
> lug 27 16:00:00.03: [11950]: <-- data [3]
> lug 27 16:00:00.03: [11950]: <-- data [2]
> lug 27 16:00:01.20: [11950]: --> [2:OK]
> lug 27 16:00:01.20: [11950]: MODEM input buffering enabled
> lug 27 16:00:01.20: [11950]: <-- [5:ATH0\r]
> lug 27 16:00:01.44: [11950]: --> [2:OK]
> lug 27 16:00:01.44: [11950]: MODEM set DTR OFF
> lug 27 16:00:01.44: [11950]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
> lug 27 16:00:01.44: [11950]: SESSION END



> ____________________ HylaFAX(tm) Users Mailing List 
_______________________
>   To subscribe/unsubscribe, click 
http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < 
/dev/null

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services