[hylafax-users] Send 1 Fax, Then Can Never Receive

To: <hylafax-users@hylafax.org>
Subject: [hylafax-users] Send 1 Fax, Then Can Never Receive
From: "Bestia" <bestia@lanstation.it>
Date: Sat, 27 Jul 2002 16:12:59 +0200 (CEST)
At last, after weeks of trying hard to solve this one by myself, I decided
to post on the list, crying for help!
My HylaFAX installation works almost fine...I can actually send and
receive faxes. I can also send faxes from other PCs in the LAN (both from
Linux boxes running GFax and from Windwos boxes running whfc)...This
probably means that I don't have huge hardware or software configuration
issues.
The thing is...that after I send a fax, HylaFAX never returns to the state
of "Running and idle", instead faxstat keep saying "Waiting for modem to
come ready"...DTR is set OFF by FaxSend, and nothing happens after fax is
succesfully sent. Obviously in this situation, the modem cannot receive
faxes. So, I always have to kill faxgetty manually, faxgetty respawns and
take control of the serial line re-initializing the modem...
I believe this is due to the fact that - for some strange reason -
faxgetty does not realize that the faxsend job is over and that he has to
set the modem DTR on, because faxsend just leaves DTR set to off.
I usually send 5 faxes and receive 6-8 faxes a day...So I cannot simply
stay in the office all day making sure that the system.
Please help!!!!

Now, the facts:
1) OS: RedHat Linux 7.3 running on i386
2) Hylafax Version: HylaFAX RPM version 4.1.2-rh7
3) Modem (external): MODEM USR U.S. Robotics 56K Message Rev. 12.1.12

The faxgetty entry in my /etc/inittab is the following:
S1:235:respawn:/usr/sbin/faxgetty ttyS1

My /var/spool/hylafax/etc/config.ttyS1 is taken from the template Id:
usr-xon,v 1.6 2002/04/07 20:29:27 darren. I have basically added just the
last line:
CountryCode:		XX
AreaCode:		XXX
FAXNumber:		+XX.XXX.XXXXXX
LongDistancePrefix:	0
InternationalPrefix:	00
DialStringRules:	etc/dialrules
ServerTracing:		0x0f
SessionTracing:		0xFFF
RecvFileMode:		0666
LogFileMode:		0600
DeviceMode:		0600
RingsBeforeAnswer:	2
SpeakerVolume:		low
GettyArgs:		"-h %l dx_%s"
LocalIdentifier:	"MyCompanyName"
TagLineFont:		etc/lutRS18.pcf
TagLineFormat:		"From %%l|%c|Page %%P of %%T"
MaxRecvPages:		25
UUCPLockDir:		/var/lock

ModemType:		Class1		# use class 1 interface
ModemRate:		19200		# rate for DCE-DTE communication
ModemFlowControl:	xonxoff		# hardware flow control

ModemSetupDTRCmd:	ATS13=1&D2	# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
ModemNoFlowCmd:		AT&H0&I0&R1	# setup modem for no flow control
ModemHardFlowCmd:	AT&H1&I0&R2	# setup modem for hardware flow control
ModemSoftFlowCmd:	AT&H2&I2&R1	# setup modem for software flow control
ModemResultCodesCmd:	ATQ0X4		# enable result codes

ModemMfrQueryCmd:	!USR
ModemModelQueryCmd:	ATI3
ModemRevQueryCmd:	ATI7		# XXX returns a multi-line result

Class1NFLOCmd:		AT&H0&I0&R1	# setup modem for no flow control
Class1HFLOCmd:		AT&H1&I0&R2	# setup modem for hardware flow control
Class1SFLOCmd:		""		# modem does this automatically

ModemSetupAACmd:	AT+FCLASS=0	# leave modem idling in class 0
ModemAnswerCmd:		AT+FCLASS=1A	# answer in Class 1
Class2NRCmd:		AT+FNR=1,1,1,0

ModemDialCmd:		ATX3DT%s          # T for tone dialing, @ for silence

In the following log you can analize a session where I send a fax out and
the I have to kill the faxgetty process because the modem does not go back
to DTR ON.

lug 27 15:58:54 fax FaxQueuer[11811]: SUBMIT JOB 158
lug 27 15:59:05 fax FaxSend[11950]: MODEM set DTR OFF
lug 27 15:59:05 fax FaxSend[11950]: DELAY 75 ms
lug 27 15:59:05 fax FaxSend[11950]: MODEM set DTR ON
lug 27 15:59:05 fax FaxSend[11950]: DELAY 2600 ms
lug 27 15:59:08 fax FaxSend[11950]: MODEM set baud rate: 19200 baud, input
flow XON/XOFF, output flow XON/XOFFlug 27 15:59:08 fax FaxSend[11950]: MODEM flush i/o
lug 27 15:59:08 fax FaxSend[11950]: <-- [4:ATZ\r]
lug 27 15:59:08 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:08 fax FaxSend[11950]: DELAY 3000 ms
lug 27 15:59:11 fax FaxSend[11950]: <-- [5:ATE0\r]
lug 27 15:59:11 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:11 fax FaxSend[11950]: <-- [5:ATV1\r]
lug 27 15:59:12 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:12 fax FaxSend[11950]: <-- [7:ATQ0X4\r]
lug 27 15:59:12 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:12 fax FaxSend[11950]: <-- [7:ATS0=0\r]
lug 27 15:59:12 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:12 fax FaxSend[11950]: <-- [7:ATS8=2\r]
lug 27 15:59:12 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:12 fax FaxSend[11950]: <-- [8:ATS7=60\r]
lug 27 15:59:13 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:13 fax FaxSend[11950]: <-- [12:AT&H2&I2&R1\r]
lug 27 15:59:13 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:13 fax FaxSend[11950]: <-- [11:ATS13=1&D2\r]
lug 27 15:59:13 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:13 fax FaxSend[11950]: <-- [6:AT&C1\r]
lug 27 15:59:13 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:13 fax FaxSend[11950]: <-- [12:AT+FCLASS=?\r]
lug 27 15:59:14 fax FaxSend[11950]: --> [7:0,1,2.0]
lug 27 15:59:14 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:14 fax FaxSend[11950]: <-- [12:AT+FCLASS=1\r]
lug 27 15:59:14 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:14 fax FaxSend[11950]: <-- [5:ATI3\r]
lug 27 15:59:14 fax FaxSend[11950]: --> [38:U.S. Robotics 56K Message Rev.
12.1.12]lug 27 15:59:14 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:14 fax FaxSend[11950]: <-- [5:ATI7\r]
lug 27 15:59:14 fax FaxSend[11950]: --> [24:Configuration Profile...]
lug 27 15:59:14 fax FaxSend[11950]: --> [37:Product type           Italy
External]lug 27 15:59:14 fax FaxSend[11950]: --> [31:Product ID:            13206800]
lug 27 15:59:14 fax FaxSend[11950]: --> [43:Options               
V32bis,V.34+,x2,V.90]lug 27 15:59:14 fax FaxSend[11950]: --> [40:Fax Options            Class
1/Class 2.0]lug 27 15:59:14 fax FaxSend[11950]: --> [41:Voice Options          Speaker
Phone, TAD]lug 27 15:59:14 fax FaxSend[11950]: --> [30:Clock Freq             92.0Mhz]
lug 27 15:59:14 fax FaxSend[11950]: --> [27:EPROM                  256k]
lug 27 15:59:14 fax FaxSend[11950]: --> [26:RAM                    32k]
lug 27 15:59:14 fax FaxSend[11950]: --> [30:FLASH date             2/13/98]
lug 27 15:59:14 fax FaxSend[11950]: --> [30:FLASH rev              12.1.12]
lug 27 15:59:15 fax FaxSend[11950]: --> [30:DSP date               2/13/98]
lug 27 15:59:15 fax FaxSend[11950]: --> [30:DSP rev                12.1.12]
lug 27 15:59:15 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:15 fax FaxSend[11950]: <-- [9:AT+FTM=?\r]
lug 27 15:59:15 fax FaxSend[11950]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]lug 27 15:59:15 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:15 fax FaxSend[11950]: <-- [9:AT+FRM=?\r]
lug 27 15:59:15 fax FaxSend[11950]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]lug 27 15:59:15 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:15 fax FaxSend[11950]: <-- [12:AT+FCLASS=1\r]
lug 27 15:59:16 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:16 fax FaxSend[11950]: <-- [12:AT+FCLASS=0\r]
lug 27 15:59:16 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:16 fax FaxSend[11950]: MODEM USR U.S. Robotics 56K Message
Rev. 12.1.12/Configuration Profile... Product type           Italy
External Product ID:            13206800 Options               
V32bis,V.34+,x2,V.90 Fax Options            Class 1/Class 2.0 Voice
Options          Speaker Phone, TAD Clock Freq             92.0Mhz EPROM  
               256k RAM                    32k FLASH date            
2/13/98 FLASH rev              12.1.12 DSP date               2/13/98 DSP
rev                12.1.12lug 27 15:59:16 fax FaxSend[11950]: <-- [7:ATL1M1\r]
lug 27 15:59:16 fax FaxSend[11950]: --> [2:OK]
lug 27 15:59:16 fax FaxSend[11950]: MODEM input buffering disabled
lug 27 15:59:16 fax FaxSend[11950]: SEND FAX: JOB 158 DEST
1088003534680300 COMMID 00000438 DEVICE '/dev/ttyS1'lug 27 15:59:59 fax FaxSend[11950]: SEND FAX: JOB 158 SENT in 0:11
Jul 27 16:00:54 fax FaxGetty[11827]: CAUGHT SIGNAL 15
Jul 27 16:00:54 fax FaxGetty[11827]: CLOSE /dev/ttyS1
Jul 27 16:00:54 fax FaxGetty[11827]: <-- [5:ATH0\r]
Jul 27 16:00:59 fax FaxGetty[11827]: MODEM TIMEOUT: reading line from modem
Jul 27 16:00:59 fax FaxGetty[11827]: MODEM <Timeout>
Jul 27 16:00:59 fax FaxGetty[11827]: MODEM set DTR OFF
Jul 27 16:00:59 fax FaxGetty[11986]: OPEN /dev/ttyS1  HylaFAX (tm) Version
4.1.2Jul 27 16:00:59 fax FaxGetty[11986]: MODEM set DTR OFF
Jul 27 16:00:59 fax FaxGetty[11986]: DELAY 75 ms
Jul 27 16:00:59 fax FaxGetty[11986]: MODEM set DTR ON
Jul 27 16:00:59 fax FaxGetty[11986]: DELAY 2600 ms
Jul 27 16:01:02 fax FaxGetty[11986]: MODEM set baud rate: 19200 baud,
input flow XON/XOFF, output flow XON/XOFFJul 27 16:01:02 fax FaxGetty[11986]: MODEM flush i/o
Jul 27 16:01:02 fax FaxGetty[11986]: <-- [4:ATZ\r]
Jul 27 16:01:02 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:02 fax FaxGetty[11986]: DELAY 3000 ms
Jul 27 16:01:05 fax FaxGetty[11986]: <-- [5:ATE0\r]
Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:06 fax FaxGetty[11986]: <-- [5:ATV1\r]
Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:06 fax FaxGetty[11986]: <-- [7:ATQ0X4\r]
Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:06 fax FaxGetty[11986]: <-- [7:ATS0=0\r]
Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:06 fax FaxGetty[11986]: <-- [7:ATS8=2\r]
Jul 27 16:01:06 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:06 fax FaxGetty[11986]: <-- [8:ATS7=60\r]
Jul 27 16:01:07 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:07 fax FaxGetty[11986]: <-- [12:AT&H2&I2&R1\r]
Jul 27 16:01:07 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:07 fax FaxGetty[11986]: <-- [11:ATS13=1&D2\r]
Jul 27 16:01:07 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:07 fax FaxGetty[11986]: <-- [6:AT&C1\r]
Jul 27 16:01:07 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:07 fax FaxGetty[11986]: <-- [12:AT+FCLASS=?\r]
Jul 27 16:01:08 fax FaxGetty[11986]: --> [7:0,1,2.0]
Jul 27 16:01:08 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:08 fax FaxGetty[11986]: <-- [12:AT+FCLASS=1\r]
Jul 27 16:01:08 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:08 fax FaxGetty[11986]: <-- [5:ATI3\r]
Jul 27 16:01:08 fax FaxGetty[11986]: --> [38:U.S. Robotics 56K Message
Rev. 12.1.12]Jul 27 16:01:08 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:08 fax FaxGetty[11986]: <-- [5:ATI7\r]
Jul 27 16:01:08 fax FaxGetty[11986]: --> [24:Configuration Profile...]
Jul 27 16:01:08 fax FaxGetty[11986]: --> [37:Product type           Italy
External]Jul 27 16:01:08 fax FaxGetty[11986]: --> [31:Product ID:            13206800]
Jul 27 16:01:08 fax FaxGetty[11986]: --> [43:Options               
V32bis,V.34+,x2,V.90]Jul 27 16:01:08 fax FaxGetty[11986]: --> [40:Fax Options            Class
1/Class 2.0]Jul 27 16:01:08 fax FaxGetty[11986]: --> [41:Voice Options         
Speaker Phone, TAD]Jul 27 16:01:08 fax FaxGetty[11986]: --> [30:Clock Freq             92.0Mhz]
Jul 27 16:01:09 fax FaxGetty[11986]: --> [27:EPROM                  256k]
Jul 27 16:01:09 fax FaxGetty[11986]: --> [26:RAM                    32k]
Jul 27 16:01:09 fax FaxGetty[11986]: --> [30:FLASH date             2/13/98]
Jul 27 16:01:09 fax FaxGetty[11986]: --> [30:FLASH rev              12.1.12]
Jul 27 16:01:09 fax FaxGetty[11986]: --> [30:DSP date               2/13/98]
Jul 27 16:01:09 fax FaxGetty[11986]: --> [30:DSP rev                12.1.12]
Jul 27 16:01:09 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:09 fax FaxGetty[11986]: <-- [9:AT+FTM=?\r]
Jul 27 16:01:09 fax FaxGetty[11986]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]Jul 27 16:01:09 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:09 fax FaxGetty[11986]: <-- [9:AT+FRM=?\r]
Jul 27 16:01:09 fax FaxGetty[11986]: -->
[41:3,24,48,72,73,74,96,97,98,121,122,145,146]Jul 27 16:01:10 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:10 fax FaxGetty[11986]: <-- [12:AT+FCLASS=1\r]
Jul 27 16:01:10 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:10 fax FaxGetty[11986]: <-- [12:AT+FCLASS=0\r]
Jul 27 16:01:10 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:10 fax FaxGetty[11986]: MODEM USR U.S. Robotics 56K Message
Rev. 12.1.12/Configuration Profile... Product type           Italy
External Product ID:            13206800 Options               
V32bis,V.34+,x2,V.90 Fax Options            Class 1/Class 2.0 Voice
Options          Speaker Phone, TAD Clock Freq             92.0Mhz EPROM  
               256k RAM                    32k FLASH date            
2/13/98 FLASH rev              12.1.12 DSP date               2/13/98 DSP
rev                12.1.12Jul 27 16:01:10 fax FaxGetty[11986]: <-- [7:ATL1M1\r]
Jul 27 16:01:10 fax FaxGetty[11986]: --> [2:OK]
Jul 27 16:01:10 fax FaxGetty[11986]: MODEM input buffering disabled

Also, you may want to check the relevant transmition log:

lug 27 15:59:16.64: [11950]: SESSION BEGIN 00000438 395741088003534680300
lug 27 15:59:16.64: [11950]: HylaFAX (tm) Version 4.1.2
lug 27 15:59:16.64: [11950]: SEND FAX: JOB 158 DEST 1088003534680300
COMMID 00000438 DEVICE '/dev/ttyS1'lug 27 15:59:16.64: [11950]: MODEM set DTR OFF
lug 27 15:59:16.64: [11950]: DELAY 75 ms
lug 27 15:59:16.72: [11950]: MODEM set DTR ON
lug 27 15:59:16.72: [11950]: DELAY 2600 ms
lug 27 15:59:19.32: [11950]: MODEM set baud rate: 19200 baud, input flow
XON/XOFF, output flow XON/XOFFlug 27 15:59:19.32: [11950]: MODEM flush i/o
lug 27 15:59:19.32: [11950]: <-- [4:ATZ\r]
lug 27 15:59:19.46: [11950]: --> [2:OK]
lug 27 15:59:19.46: [11950]: DELAY 3000 ms
lug 27 15:59:22.46: [11950]: <-- [5:ATE0\r]
lug 27 15:59:22.60: [11950]: --> [2:OK]
lug 27 15:59:22.60: [11950]: <-- [5:ATV1\r]
lug 27 15:59:22.74: [11950]: --> [2:OK]
lug 27 15:59:22.74: [11950]: <-- [7:ATQ0X4\r]
lug 27 15:59:22.88: [11950]: --> [2:OK]
lug 27 15:59:22.88: [11950]: <-- [7:ATS0=0\r]
lug 27 15:59:23.02: [11950]: --> [2:OK]
lug 27 15:59:23.02: [11950]: <-- [7:ATS8=2\r]
lug 27 15:59:23.16: [11950]: --> [2:OK]
lug 27 15:59:23.16: [11950]: <-- [8:ATS7=60\r]
lug 27 15:59:23.30: [11950]: --> [2:OK]
lug 27 15:59:23.30: [11950]: <-- [12:AT&H2&I2&R1\r]
lug 27 15:59:23.44: [11950]: --> [2:OK]
lug 27 15:59:23.44: [11950]: <-- [11:ATS13=1&D2\r]
lug 27 15:59:23.58: [11950]: --> [2:OK]
lug 27 15:59:23.58: [11950]: <-- [6:AT&C1\r]
lug 27 15:59:23.72: [11950]: --> [2:OK]
lug 27 15:59:23.72: [11950]: <-- [12:AT+FCLASS=1\r]
lug 27 15:59:23.86: [11950]: <-- [12:AT+FCLASS=0\r]
lug 27 15:59:24.00: [11950]: --> [2:OK]
lug 27 15:59:24.00: [11950]: <-- [7:ATL1M1\r]
lug 27 15:59:24.14: [11950]: --> [2:OK]
lug 27 15:59:24.14: [11950]: STATE CHANGE: RUNNING -> SENDING
lug 27 15:59:24.14: [11950]: MODEM input buffering enabled
lug 27 15:59:24.14: [11950]: <-- [12:AT+FCLASS=1\r]
lug 27 15:59:24.39: [11950]: --> [2:OK]
lug 27 15:59:24.39: [11950]: MODEM set XON/XOFF/FLUSH: input ignored,
output disabledlug 27 15:59:24.40: [11950]: DIAL 1088003534680300
lug 27 15:59:24.40: [11950]: <-- [23:ATX3DT1088003534680300\r]
lug 27 15:59:45.79: [11950]: --> [7:CONNECT]
lug 27 15:59:45.79: [11950]: MODEM input buffering disabled
lug 27 15:59:47.63: [11950]: --> HDLC<41:FF C0 04 00 00 88 01 00 51 92 08
EA A2 32 32 B2 82 72 04 92 72 2A A2 4A 72 82 2A 00 F2 00 01 01 1B 71 80 80
80 80 20 0B 90>lug 27 15:59:47.63: [11950]: --> [2:OK]
lug 27 15:59:47.63: [11950]: REMOTE NSF "00 00 11 80 00 8A 49 10 57 45 4C
4C 4D 41 4E 20 49 4E 54 45 52 4E 41 54 00 4F 00 80 80 D8 8E 01 01 01 01 04
D0"lug 27 15:59:47.63: [11950]: NSF remote fax equipment: XXX
lug 27 15:59:47.63: [11950]: NSF remote station ID: "XXX"
lug 27 15:59:47.63: [11950]: <-- [9:AT+FRH=3\r]
lug 27 15:59:47.65: [11950]: --> [7:CONNECT]
lug 27 15:59:48.32: [11950]: --> HDLC<25:FF C0 02 0C 0C CC 0C 1C 6C 2C 0C
04 04 04 04 04 04 04 04 04 04 04 04 3C A2>lug 27 15:59:48.32: [11950]: --> [2:OK]
lug 27 15:59:48.32: [11950]: REMOTE CSI "04680300"
lug 27 15:59:48.32: [11950]: <-- [9:AT+FRH=3\r]
lug 27 15:59:48.34: [11950]: --> [7:CONNECT]
lug 27 15:59:48.59: [11950]: --> HDLC<9:FF C8 01 00 77 15 22 17 5D>
lug 27 15:59:48.59: [11950]: --> [2:OK]
lug 27 15:59:48.59: [11950]: REMOTE best rate 14400 bit/s
lug 27 15:59:48.59: [11950]: REMOTE max page width 1728 pixels in 215 mm
lug 27 15:59:48.59: [11950]: REMOTE max unlimited page length
lug 27 15:59:48.59: [11950]: REMOTE best vres 7.7 line/mm
lug 27 15:59:48.59: [11950]: REMOTE best format 2-D MMR
lug 27 15:59:48.59: [11950]: REMOTE supports T.30 Annex A, ECM
lug 27 15:59:48.59: [11950]: REMOTE best 10 ms/scanline
lug 27 15:59:48.59: [11950]: USE 14400 bit/s
lug 27 15:59:48.60: [11950]: USE 10 ms/scanline
lug 27 15:59:48.60: [11950]: SEND file "docq/doc163.ps;70"
lug 27 15:59:48.60: [11950]: USE page width 1728 pixels in 215 mm
lug 27 15:59:48.60: [11950]: USE unlimited page length
lug 27 15:59:48.60: [11950]: USE 3.85 line/mm
lug 27 15:59:48.60: [11950]: USE 2-D MR
lug 27 15:59:48.60: [11950]: SEND training at v.17 14400 bit/s
lug 27 15:59:48.60: [11950]: <-- [9:AT+FTH=3\r]
lug 27 15:59:48.80: [11950]: --> [7:CONNECT]
lug 27 15:59:48.80: [11950]: <-- HDLC<23:FF C0 C2 CE 86 CA 04 36 2E 76 92
B4 9E A6 76 86 16 C2 04 04 04 04 04>lug 27 15:59:48.80: [11950]: <-- data [23]
lug 27 15:59:48.80: [11950]: <-- data [2]
lug 27 15:59:48.83: [11950]: --> [7:CONNECT]
lug 27 15:59:48.83: [11950]: <-- HDLC<6:FF C8 C1 00 45 14>
lug 27 15:59:48.83: [11950]: <-- data [6]
lug 27 15:59:48.83: [11950]: <-- data [2]
lug 27 15:59:50.78: [11950]: --> [2:OK]
lug 27 15:59:50.78: [11950]: <-- [9:AT+FTS=7\r]
lug 27 15:59:50.87: [11950]: --> [2:OK]
lug 27 15:59:50.87: [11950]: MODEM set XON/XOFF/FLUSH: input interpreted,
output disabledlug 27 15:59:50.87: [11950]: <-- [11:AT+FTM=145\r]
lug 27 15:59:52.35: [11950]: --> [7:CONNECT]
lug 27 15:59:52.35: [11950]: <-- data [1024]
lug 27 15:59:52.35: [11950]: <-- data [1024]
lug 27 15:59:52.35: [11950]: <-- data [652]
lug 27 15:59:52.35: [11950]: <-- data [2]
lug 27 15:59:53.88: [11950]: --> [2:OK]
lug 27 15:59:53.88: [11950]: MODEM set XON/XOFF/DRAIN: input ignored,
output disabledlug 27 15:59:53.88: [11950]: <-- [9:AT+FRH=3\r]
lug 27 15:59:54.14: [11950]: --> [7:CONNECT]
lug 27 15:59:55.23: [11950]: --> HDLC<5:FF C8 21 57 BE>
lug 27 15:59:55.23: [11950]: --> [2:OK]
lug 27 15:59:55.23: [11950]: TRAINING succeeded
lug 27 15:59:55.23: [11950]: DELAY 75 ms
lug 27 15:59:55.31: [11950]: <-- [11:AT+FTM=146\r]
lug 27 15:59:55.57: [11950]: --> [7:CONNECT]
lug 27 15:59:55.57: [11950]: SEND begin page
lug 27 15:59:55.57: [11950]: MODEM set XON/XOFF/FLUSH: input interpreted,
output disabledlug 27 15:59:55.58: [11950]: <-- data [1025]
lug 27 15:59:55.58: [11950]: <-- data [1029]
lug 27 15:59:55.58: [11950]: <-- data [570]
lug 27 15:59:55.58: [11950]: SENT 2615 bytes of data
lug 27 15:59:55.58: [11950]: SEND 2D RTC
lug 27 15:59:55.58: [11950]: <-- data [30]
lug 27 15:59:55.58: [11950]: <-- data [2]
lug 27 15:59:55.58: [11950]: SEND end page
lug 27 15:59:57.07: [11950]: --> [2:OK]
lug 27 15:59:57.07: [11950]: MODEM set XON/XOFF/DRAIN: input ignored,
output disabledlug 27 15:59:57.07: [11950]: <-- [9:AT+FTS=9\r]
lug 27 15:59:57.18: [11950]: --> [2:OK]
lug 27 15:59:57.18: [11950]: SEND send EOP (no more pages or documents)
lug 27 15:59:57.18: [11950]: <-- [9:AT+FTH=3\r]
lug 27 15:59:57.34: [11950]: --> [7:CONNECT]
lug 27 15:59:57.34: [11950]: <-- HDLC<3:FF C8 F4>
lug 27 15:59:57.34: [11950]: <-- data [3]
lug 27 15:59:57.34: [11950]: <-- data [2]
lug 27 15:59:58.52: [11950]: --> [2:OK]
lug 27 15:59:58.52: [11950]: <-- [9:AT+FRH=3\r]
lug 27 15:59:58.94: [11950]: --> [7:CONNECT]
lug 27 15:59:59.82: [11950]: --> HDLC<5:FF C8 31 45 8F>
lug 27 15:59:59.82: [11950]: --> [2:OK]
lug 27 15:59:59.82: [11950]: SEND recv MCF (message confirmation)
lug 27 15:59:59.83: [11950]: SEND FAX (00000438): FROM lore@fax TO
1088xxxxxxxxx (page 1 of 1 sent in 0:11)lug 27 15:59:59.83: [11950]: SEND FAX (00000438): FROM lore@fax TO
1088xxxxxxxxx (docq/doc163.ps;70 sent in 0:11)lug 27 15:59:59.83: [11950]: <-- [9:AT+FTH=3\r]
lug 27 16:00:00.03: [11950]: --> [7:CONNECT]
lug 27 16:00:00.03: [11950]: <-- HDLC<3:FF C8 DF>
lug 27 16:00:00.03: [11950]: <-- data [3]
lug 27 16:00:00.03: [11950]: <-- data [2]
lug 27 16:00:01.20: [11950]: --> [2:OK]
lug 27 16:00:01.20: [11950]: MODEM input buffering enabled
lug 27 16:00:01.20: [11950]: <-- [5:ATH0\r]
lug 27 16:00:01.44: [11950]: --> [2:OK]
lug 27 16:00:01.44: [11950]: MODEM set DTR OFF
lug 27 16:00:01.44: [11950]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
lug 27 16:00:01.44: [11950]: SESSION END



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
Follow-Ups:
- Re: [hylafax-users] Send 1 Fax, Then Can Never Receive
  - From: Giulio Orsero
- Re: [hylafax-users] Send 1 Fax, Then Can Never Receive
  - From: Martin Zambo
Prev by Date: [hylafax-users] Back to just getting it to compile
Next by Date: Re: [hylafax-users] Back to just getting it to compile
Previous by thread: Re: [hylafax-users] Back to just getting it to compile
Next by thread: Re: [hylafax-users] Send 1 Fax, Then Can Never Receive
Index(es):
- Main
- Thread
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services