Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Unspecified Phase C error



On 2002.07.24 01:24 Mike Liguit wrote:

> I'm on a class 2.0 of USR V.Everthing Courier 56K modem. I would
> very much appreciate your help regarding this.

> Jul 24 16:24:33.50: [  939]: RECV: REJECT page quality, 4% good lines
> (95% required)
> Jul 24 16:24:33.50: [  939]: RECV send RTN (retrain negative)
> Jul 24 16:24:33.51: [  939]: <-- [9:AT+FPS=2\r]
> Jul 24 16:24:33.65: [  939]: --> [5:ERROR]
> Jul 24 16:24:33.65: [  939]: MODEM Command error

First off, most people should run their USR modems in Class 1.

That said, the problem you demonstrate is an inability of your modem to 
support Class2PTSCmd.  So the obvious thing to do would be to check your 
modem's support of "AT+FPS=2" and modify Class2PTSCmd appropriately.

However, 4% good lines indicates a terrible problem elsewhere, and the 
ERROR with AT+FPS may really only be a symptom of that problem (i.e., 
Class2PTSCmd may be just fine as it is).  So you should check to see if 
the modem cannot receive faxes from anywhere or just from this sender.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services