Re: [hylafax-users] one more log....

[Jason McMunn <mcmunn@mcmunn.com>]

YES! a HERO! is born.

That fixed it..

thanks man. you just made my day.

it had no flow control, i tried xonxoff (it was already in the config
file, just commented out).  That made it really go nuts... so I tried
rtscts and it worked great!!

thanks man!

thanks everyone else for the feedback...

hylafax rules!

On Tue, 9 Jul 2002, Josh Welch wrote:

> > -----Original Message-----
> > From: hylafax-users-bounce@hylafax.org
> > [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Jason McMunn
> > Sent: Tuesday, July 09, 2002 10:33 AM
> > To: hylafax-users@hylafax.org
> > Subject: [hylafax-users] one more log....
> >
> >
> > The previous log was of a transmission locked at 2400 baud because i was
> > trying to debug.. i figured i'd force to send slower and that might use a
> > differnet protocol or something (yes, grasping at straws).  Here is
> > another log, that wasn't constrained...
> >
> > They all have the same chopped up, only get about 40% total of the fax...
> >
> >
> > Jul 07 01:11:20.85: [  932]: SESSION BEGIN 00000011 17029394116
> > Jul 07 01:11:20.85: [  932]: HylaFAX (tm) Version 4.1
> > Jul 07 01:11:20.85: [  932]: SEND FAX: JOB 9 DEST 9394116 COMMID 00000011
> > Jul 07 01:11:20.85: [  932]: DEVICE '/dev/cuaa0'
> > Jul 07 01:11:20.85: [  932]: MODEM set DTR OFF
> > Jul 07 01:11:20.85: [  932]: DELAY 75 ms
> > Jul 07 01:11:20.94: [  932]: MODEM set DTR ON
> > Jul 07 01:11:20.94: [  932]: DELAY 2600 ms
> > Jul 07 01:11:23.55: [  932]: MODEM set baud rate: 19200 baud,
> > input flow XON/XOFF, output flow XON/XOFF
>
> <snipped rest of log>
>
> I have had better success with rtscts for my flow control
> In my config.$DEVICE file:
> ModemFlowControl:       rtscts
>
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>   To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
>
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null