Re: [hylafax-users] one more log....

["Josh Welch" <jwelch@buffalowildwings.com>]

> -----Original Message-----
> From: hylafax-users-bounce@hylafax.org
> [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Jason McMunn
> Sent: Tuesday, July 09, 2002 10:33 AM
> To: hylafax-users@hylafax.org
> Subject: [hylafax-users] one more log....
> 
> 
> The previous log was of a transmission locked at 2400 baud because i was
> trying to debug.. i figured i'd force to send slower and that might use a
> differnet protocol or something (yes, grasping at straws).  Here is
> another log, that wasn't constrained...
> 
> They all have the same chopped up, only get about 40% total of the fax...
> 
> 
> Jul 07 01:11:20.85: [  932]: SESSION BEGIN 00000011 17029394116
> Jul 07 01:11:20.85: [  932]: HylaFAX (tm) Version 4.1
> Jul 07 01:11:20.85: [  932]: SEND FAX: JOB 9 DEST 9394116 COMMID 00000011
> Jul 07 01:11:20.85: [  932]: DEVICE '/dev/cuaa0'
> Jul 07 01:11:20.85: [  932]: MODEM set DTR OFF
> Jul 07 01:11:20.85: [  932]: DELAY 75 ms
> Jul 07 01:11:20.94: [  932]: MODEM set DTR ON
> Jul 07 01:11:20.94: [  932]: DELAY 2600 ms
> Jul 07 01:11:23.55: [  932]: MODEM set baud rate: 19200 baud, 
> input flow XON/XOFF, output flow XON/XOFF

<snipped rest of log>

I have had better success with rtscts for my flow control
In my config.$DEVICE file:
ModemFlowControl:       rtscts

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null