Re: [hylafax-users] unspecified transmit error phase b code 20

[tprice@lovebox.com (Tim Price)]

That did it.  We are using WHFC, previously with an HP4050ps driver.  This
did/does work fine on the SuSe8.0 machine, but not on the RH7.3 machine.

I appreciate you help and quick response very much.  Next time I'll ask you for
help much sooner.


-----Original Message-----
From: Lee Howard [mailto:faxguy@howardsilvan.com]
Sent: Friday, June 28, 2002 3:54 PM
To: tprice@lovebox.com
Cc: hylafax-users@hylafax.org
Subject: Re: [hylafax-users] unspecified transmit error phase b code 20


Figure out why your client is sending foobarred Postscript.  I.e., with
WHFC make sure you're using the Apple Laserwriter driver to make the
Postscript file.

Lee.


On 2002.06.28 13:31 Tim Price wrote:
> Works like a charm.  Now what?....
>
>
> -----Original Message-----
> From: Lee Howard [mailto:faxguy@howardsilvan.com]
> Sent: Friday, June 28, 2002 2:42 PM
> To: tprice@lovebox.com
> Cc: hylafax-users@hylafax.org
> Subject: Re: [hylafax-users] unspecified transmit error phase b code 20
>
>
> On 2002.06.28 12:26 Tim Price wrote:
>
> > Jun 27 16:19:37.80: [ 3472]: USE 0 ms/scanline
> > Jun 27 16:19:37.80: [ 3472]: <-- [5:ATH0\r]
> > Jun 27 16:19:38.07: [ 3472]: --> [9:+FHNG: 20]
> > Jun 27 16:19:38.07: [ 3472]: REMOTE HANGUP: Unspecified Transmit Phase
> B
> > error
> > (code 20)
> > Jun 27 16:19:39.55: [ 3472]: --> [2:OK]
> > Jun 27 16:19:39.55: [ 3472]: SESSION END
>
> This is usually an indication that ps2fax imaged encountered (but did not
>
> fail) some bad postscript image file.
>
> Try 'sendfax -d some_number /etc/hosts' and see how it goes.
>
> Lee.
>


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null