Re: [hylafax-users] unspecified transmit error phase b code 20

[Lee Howard <faxguy@howardsilvan.com>]

Figure out why your client is sending foobarred Postscript.  I.e., with 
WHFC make sure you're using the Apple Laserwriter driver to make the 
Postscript file.

Lee.


On 2002.06.28 13:31 Tim Price wrote:
> Works like a charm.  Now what?....
> 
> 
> -----Original Message-----
> From: Lee Howard [mailto:faxguy@howardsilvan.com]
> Sent: Friday, June 28, 2002 2:42 PM
> To: tprice@lovebox.com
> Cc: hylafax-users@hylafax.org
> Subject: Re: [hylafax-users] unspecified transmit error phase b code 20
> 
> 
> On 2002.06.28 12:26 Tim Price wrote:
> 
> > Jun 27 16:19:37.80: [ 3472]: USE 0 ms/scanline
> > Jun 27 16:19:37.80: [ 3472]: <-- [5:ATH0\r]
> > Jun 27 16:19:38.07: [ 3472]: --> [9:+FHNG: 20]
> > Jun 27 16:19:38.07: [ 3472]: REMOTE HANGUP: Unspecified Transmit Phase
> B
> > error
> > (code 20)
> > Jun 27 16:19:39.55: [ 3472]: --> [2:OK]
> > Jun 27 16:19:39.55: [ 3472]: SESSION END
> 
> This is usually an indication that ps2fax imaged encountered (but did not
> 
> fail) some bad postscript image file.
> 
> Try 'sendfax -d some_number /etc/hosts' and see how it goes.
> 
> Lee.
> 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null