Re: [hylafax-users] USR ROBOTIC

["Siew Wing Loon" <wlsiew@webpipe.net>]

Hi, 

Here is my working config file for US Robotics 14.4 modem 

Best regards,
Siew 


Massimo Donato writes: 

> Sorry First one without config attached. 
> 
> Hi,
>     Here is my config file for my usr 56k faxmodem, just a bit different
> from your.
> I used Class 1 config because of higher error rates in Class 2. 
> 
> I removed the FAXNumber and Local Identifier fileds, i think you want to
> edit them. 
> 
> regards. 
> 
> Massimo Donato 
> 
> 
> ----- Original Message -----
> From: "Alain Siani" <ASiani@wanadoo.fr>
> To: "List Hylafax" <hylafax-users@hylafax.org>
> Sent: Friday, June 21, 2002 1:05 PM
> Subject: [hylafax-users] USR ROBOTIC 
> 
> 
>> Hello, 
>>
>> if you have a config for USR ROBOTIC 56K MESSAGE, please send me your
>> hylafax config file... 
>>
>> Thks
>> Alain 
>>
>> 
>>
>> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>>   To subscribe/unsubscribe, click
> http://lists.hylafax.org/cgi-bin/lsg2.cgi
>>  On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
>>
> 
 
# $Id: usr-xon,v 1.6 2002/04/07 20:29:27 darren Exp $
#
# HylaFAX Facsimile Software
#
# Copyright (c) 1990-1996 Sam Leffler
# Copyright (c) 1991-1996 Silicon Graphics, Inc.
# HylaFAX is a trademark of Silicon Graphics, Inc.
# 
# Permission to use, copy, modify, distribute, and sell this software and 
# its documentation for any purpose is hereby granted without fee, provided
# that (i) the above copyright notices and this permission notice appear in
# all copies of the software and related documentation, and (ii) the names of
# Sam Leffler and Silicon Graphics may not be used in any advertising or
# publicity relating to the software without the specific, prior written
# permission of Sam Leffler and Silicon Graphics.
# 
# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
# 
# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF 
# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE 
# OF THIS SOFTWARE.
#

#
# Configuration for using the Class 1 command interface with
# a USR Courier or Sportster modem and XON/XOFF flow control. 
#
# CONFIG:CLASS1:1444:.*:XON*|DEF*: Manufacturer=USRobotics Model=Courier/Sportster
# CONFIG:CLASS1:1445:.*:XON*|DEF*: Manufacturer=USRobotics Model=Courier/Sportster
# CONFIG:CLASS1:2886:.*:XON*|DEF*: Manufacturer=USRobotics Model=Courier/Sportster
# CONFIG:CLASS1:3366:.*:XON*|DEF*: Manufacturer=USRobotics Model=Courier
# CONFIG:CLASS1:3361:.*:XON*|DEF*: Manufacturer="USRobotics w/TI Chipset" Model="Sportster 33600"
# CONFIG:CLASS1:3362:.*:XON*|DEF*: Manufacturer="USRobotics w/TI Chipset" Model="Sportster 33600"
# CONFIG:CLASS1:3367:.*:XON*|DEF*: Manufacturer="USRobotics" Model="Courier"
# CONFIG:CLASS1:5601:.*:XON*|DEF*: Manufacturer="3Com U. S. Robotics" Model="3CP5610"
#
# BEGIN-SERVER
CountryCode:            60
AreaCode:               03
FAXNumber:              +60.03.78773629
LongDistancePrefix:     00
InternationalPrefix:    000
DialStringRules:        etc/dialrules
ServerTracing:          11
SessionTracing:         11
RecvFileMode:           0644
LogFileMode:            0644
DeviceMode:             0666
RingsBeforeAnswer:      1
#SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "NothingSetup"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
# END-SERVER
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:		Class1		# use class 1 interface
ModemRate:		19200		# rate for DCE-DTE communication
ModemFlowControl:	xonxoff		# hardware flow control
#
#ModemSetupDTRCmd:	ATS13=1&D2	# setup so DTR drop resets modem
ModemSetupDCDCmd:	AT&W1		# setup so DCD reflects carrier (or not)
#ModemSetupDCDCmd:	AT&C1		# setup so DCD reflects carrier (or not)
ModemNoFlowCmd:		AT&H0&I0&R1	# setup modem for no flow control
ModemHardFlowCmd:	AT&H1&I0&R2	# setup modem for hardware flow control
#ModemSoftFlowCmd:	AT&H2&I2&R1	# setup modem for software flow control
#ModemResultCodesCmd:	ATQ0X4		# enable result codes
#
ModemMfrQueryCmd:	!USR
ModemModelQueryCmd:	ATI3
ModemRevQueryCmd:	ATI7		# XXX returns a multi-line result
#
# When AT+FCLASS=1 is issued the modem automatically switches
# to software flow control; these parameters let the fax software
# reset flow control as needed after entering Class 1.
#
Class1NFLOCmd:		AT&H0&I0&R1	# setup modem for no flow control
Class1HFLOCmd:		AT&H1&I0&R2	# setup modem for hardware flow control
Class1SFLOCmd:		""		# modem does this automatically
#
# The remainder of this configuration is included so that the
# modem "idles" in Class 0 while not sending or receiving facsimile.
#
#ModemSetupAACmd:	AT+FCLASS=0	# leave modem idling in class 0
ModemAnswerCmd:		AT+FCLASS=1A	# answer in Class 1
#
# Disables the reporting of bad frames by the modem.  This
# overcomes a firmware problem in the x2 and V90 Sportsters.
# It is not necessary for the Courier modem.
#
Class2NRCmd:    AT+FNR=1,1,1,0

ModemSetVolumeCmd:     AT&W1