|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Modem init string
Bernd, Josh, Lee -- looks right, I'll give it a go. Thanks for the pointer.
For posterity sake, from the hylafax-config man page:
ModemResetCmds
A string of commands to issue to the modem during initialization. This
string is sent to the modem before the standard set of configuration
commands required by the fax server. Note that these commands should not
include normal reset commands that are specified through other parameters.
For example, commands to setup flow control, DCD handling, DTR handling,
etc. should be specified through the appropriate configuration parameters
and not through this parameter. In addition the soft reset command (usually
``ATZ'') should not be included in this string; the servers issue this
command explicitly.
-----Original Message-----
From: hylafax-users-bounce@hylafax.org
[mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Bernd Proissl
Sent: Thursday, June 06, 2002 4:16 PM
To: hylafax-users@hylafax.org
Subject: Re: [hylafax-users] Modem init string
> I want to make the string "ATS38=35" part of the string that HylaFax uses
> each time it initializes the modem. (Does it re-init after every
> sent/received fax?)
> It seems like this is a simple question, but I can't find the answer
> anywhere. Perhaps I'm asking it wrong?
> I know I could set it permanently with an "AT&W0" command, but I don't
want
> this to be a permanent change to the modem, I just want Hylafax to set it
> after every send/receive operation.
> Ideas?
look in the corresponding modem config file in the etc directory.
see man config (man hylafax-config?)
look for something like "ModemResetCmd" or similar.
Bernd
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
