Hylafax Mailing List Archives
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] No carrier detected Zyxel Elite 2864I

Title: Messaggio

Hi,

     Thanks to Mr. Xavier for the help.

Now I 'm able to send fax but not to recieve.

When I try to call the modem (from a fax or from a phone) I see the B1 led green but the modem doesn't give any answer and in the log file there isn't any trace of the incoming call.

I've try to use both

 

ModemSetupAACmd: AT+FAA=1 

 

and

 

ModemSetupAACmd: AT+FAA=0

This is the log when I restart Hylafax and faxgetty:

 

 

Jun  4 17:03:58 flick FaxQueuer[4799]: HylaFAX (tm) Version 4.1beta2
Jun  4 17:03:58 flick FaxQueuer[4799]: Copyright (c) 1990-1996 Sam Leffler
Jun  4 17:03:58 flick FaxQueuer[4799]: Copyright (c) 1991-1996 Silicon Graphics, Inc.
Jun  4 17:03:58 flick FaxGetty[4635]: HELLO
Jun  4 17:04:19 flick FaxGetty[4807]: OPEN /dev/ttyS1
Jun  4 17:04:19 flick FaxGetty[4807]: MODEM set DTR OFF
Jun  4 17:04:19 flick FaxGetty[4807]: DELAY 2600 ms
Jun  4 17:04:21 flick FaxGetty[4807]: MODEM set DTR ON
Jun  4 17:04:21 flick FaxGetty[4807]: MODEM set baud rate: 38400 baud, input flow RTS/CTS, output flow RTS/CTS
Jun  4 17:04:21 flick FaxGetty[4807]: MODEM flush i/o
Jun  4 17:04:21 flick FaxGetty[4807]: <-- [36:AT&B1&N0&S0S18=4S38.3=1E0V1Q0S0=0H0\r]
Jun  4 17:04:21 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:21 flick FaxGetty[4807]: <-- [21:ATS8=2S7=60&H3&D2&C1\r]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:22 flick FaxGetty[4807]: <-- [12:AT+FCLASS=?\r]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [15:0,1,2,2.0,6,8,Z]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports "Data"
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports "Class 1"
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports "Class 2"
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports "Class 2.0"
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports "Voice"
Jun  4 17:04:22 flick FaxGetty[4807]: <-- [14:AT+FCLASS=2.0\r]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:22 flick FaxGetty[4807]: <-- [8:AT+FMI?\r]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [5:ZyXEL]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM: Mfr ZyXEL
Jun  4 17:04:22 flick FaxGetty[4807]: <-- [8:AT+FMM?\r]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [18:E2864  V 3.00a    ]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:22 flick FaxGetty[4807]: <-- [8:AT+FMR?\r]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [18:E2864  V 3.00a    ]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM: Model E2864
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM: Revision V 3.00a
Jun  4 17:04:22 flick FaxGetty[4807]: <-- [9:AT+FCC=?\r]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [43:(0,1),(0-5),(0-2),(0-2),(0,1),(0),(0),(0-7)]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 3.85 line/mm
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 7.7 line/mm
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 2400 bit/s
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 4800 bit/s
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 7200 bit/s
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 9600 bit/s
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 12000 bit/s
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 14400 bit/s
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports page width 1728 pixels in 215 mm
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports page width 2048 pixels in 255 mm
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports page width 2432 pixels in 303 mm
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports A4 page length (297 mm)
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports B4 page length (364 mm)
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports unlimited page length
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 1-D MR
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 2-D MR
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 0 ms/scanline
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 5 ms/scanline
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 10 ms, 5 ms/scanline
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 10 ms/scanline
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 20 ms, 10 ms/scanline
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 20 ms/scanline
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 40 ms, 20 ms/scanline
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 40 ms/scanline
Jun  4 17:04:22 flick FaxGetty[4807]: <-- [9:AT+FCQ=?\r]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [11:(0-2),(0-2)]
Jun  4 17:04:22 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:22 flick FaxGetty[4807]: MODEM Supports 1D+2D copy quality checking (but not enabled)
Jun  4 17:04:22 flick FaxGetty[4807]: <-- [9:AT+FAP=?\r]
Jun  4 17:04:23 flick FaxGetty[4807]: --> [5:ERROR]
Jun  4 17:04:23 flick FaxGetty[4807]: <-- [9:AT+FSP=?\r]
Jun  4 17:04:23 flick FaxGetty[4807]: --> [3:0,1]
Jun  4 17:04:23 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:23 flick FaxGetty[4807]: <-- [14:AT+FCLASS=2.0\r]
Jun  4 17:04:23 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:23 flick FaxGetty[4807]: <-- [9:AT+FLO=2\r]
Jun  4 17:04:23 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:23 flick FaxGetty[4807]: <-- [9:AT+FPP=0\r]
Jun  4 17:04:23 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:23 flick FaxGetty[4807]: <-- [9:AT+FBO=0\r]
Jun  4 17:04:23 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:23 flick FaxGetty[4807]: <-- [10:AT+FCT=30\r]
Jun  4 17:04:23 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:23 flick FaxGetty[4807]: <-- [15:AT+FNR=1,1,1,1\r]
Jun  4 17:04:23 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:23 flick FaxGetty[4807]: <-- [9:AT+FIE=0\r]
Jun  4 17:04:24 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:24 flick FaxGetty[4807]: <-- [23:AT+FCC=1,5,2,2,1,0,0,0\r]
Jun  4 17:04:24 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:24 flick FaxGetty[4807]: MODEM ZYXEL E2864/V 3.00a
Jun  4 17:04:24 flick FaxGetty[4807]: <-- [7:ATM1L7\r]
Jun  4 17:04:24 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:24 flick FaxGetty[4807]: <-- [9:AT+FCR=1\r]
Jun  4 17:04:24 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:24 flick FaxGetty[4807]: <-- [16:AT+FLI="CSTNET"\r]
Jun  4 17:04:24 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:24 flick FaxGetty[4807]: <-- [9:AT+FAA=1\r]
Jun  4 17:04:24 flick FaxGetty[4807]: --> [2:OK]
Jun  4 17:04:24 flick FaxGetty[4807]: MODEM input buffering disabled

 

 

 

 

I've tried also to set the speed to 19200 but the result no change.

 

Has anyone got this problem ?

         Thanks.

 

 

 

 

 

*************************************************

 

Gianluca Simoni

e-mail      gianluca.simoni@cstnet.it

 

*************************************************

 

 

 

Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services