Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Can't Receive Faxes - --> [10:NO CARRIER]



On 2002.02.27 18:05 "Burath, Philipp" wrote:
> Hi,
> 
> I have just setup Hylafax 4.1.1 with Redhat 6.1 from the source
> distribution. I haven't been able to receive any faxes as I get a [10:NO
> CARRIER]. Modem is setup as class 1. I can send faxes fine. When it tries
> to
> receive a fax it sits at "RECV: begin page" with the "off hook" light on
> and
> faxstat sits on "Receiving from XXXX". I have tried turning Adaptive
> answer
> off with AT+FAA=0 but this hasn't resolved the problem.
> 
> Any ideas?
> 
> Feb 28 10:02:05.75: [ 8046]: SESSION BEGIN 00000002 610893171536
> Feb 28 10:02:05.75: [ 8046]: HylaFAX (tm) Version 4.1.1
> Feb 28 10:02:05.76: [ 8046]: <-- [4:ATA\r]
> Feb 28 10:02:11.21: [ 8046]: --> [7:CONNECT]
> Feb 28 10:02:11.22: [ 8046]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyE0'

What is /dev/ttyE0 ?  Non-standard serial port.

....
> Feb 28 10:02:21.76: [ 8046]: RECV/CQ: Invalid BlackTable code word, row
> 0, x
> 0
> Feb 28 10:02:21.76: [ 8046]: RECV/CQ: Invalid BlackTable code word, row
> 0, x
> 0

I'm thinking either FlowControl is bad or ModemRecvFillOrder is bad in you 
modem config.

See 'man hylafax-config'

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services