Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Multitech and MPS repeated 3 times sending error



I've had the same problem using the same modem. The usual response to this
problem is "use class 1 - hylafax supports it better", but this modem
doesn't support class 1! I'm trying out a Banksia MyModem FaxModem as class
1 instead, and so far so good.

I think there is also a patch in CVS that you can apply that fixes how the
delays are handled by the modem in class 2. Can't remember where you find
this tho!

Cya

Adam.

-----Original Message-----
From: hylafax-users-bounce@hylafax.org
[mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Tardis
Sent: Thursday, 17 January 2002 11:39 AM
To: hylafax-users@hylafax.org
Subject: [hylafax-users] Multitech and MPS repeated 3 times sending
error


Hello.

I have HylaFAX V 4.1 on a RedHat 7.1 using a Multitech Modem
MT2834ZDXI.

faxaddmodem detects correctly the modem as a Class 2 modem
and uses the default script for Multitech.

When I try to send faxes to certain fax numbers I get an error "No
response to MPS repeated 3 times (code 52)".

For instance, see the session logs hereafter. How can I send faxes
to this particular fax machine ?

Only one page is sent, while the fax has 17 pages...

TIA



    ---- Transcript of session follows ----

jan 16 20:28:06.98: [30274]: SESSION BEGIN 00000458 330156985541
jan 16 20:28:06.98: [30274]: HylaFAX (tm) Version 4.1
jan 16 20:28:06.98: [30274]: SEND FAX: JOB 104 DEST 0156985541 COMMID
00000458
jan 16 20:28:06.98: [30274]: DEVICE '/dev/ttyS1'
jan 16 20:28:06.98: [30274]: DELAY 75 ms
jan 16 20:28:07.06: [30274]: DELAY 2600 ms
jan 16 20:28:09.66: [30274]: <-- [4:ATZ\r]
jan 16 20:28:10.06: [30274]: --> [2:OK]
jan 16 20:28:10.06: [30274]: <-- [5:ATE0\r]
jan 16 20:28:10.22: [30274]: --> [4:ATE0]
jan 16 20:28:10.22: [30274]: --> [2:OK]
jan 16 20:28:10.22: [30274]: <-- [5:ATV1\r]
jan 16 20:28:10.38: [30274]: --> [2:OK]
jan 16 20:28:10.38: [30274]: <-- [5:ATQ0\r]
jan 16 20:28:10.54: [30274]: --> [2:OK]
jan 16 20:28:10.54: [30274]: <-- [7:ATS0=0\r]
jan 16 20:28:10.70: [30274]: --> [2:OK]
jan 16 20:28:10.70: [30274]: <-- [7:ATS8=2\r]
jan 16 20:28:10.86: [30274]: --> [2:OK]
jan 16 20:28:10.86: [30274]: <-- [8:ATS7=60\r]
jan 16 20:28:11.02: [30274]: --> [2:OK]
jan 16 20:28:11.02: [30274]: <-- [6:AT&E4\r]
jan 16 20:28:11.18: [30274]: --> [2:OK]
jan 16 20:28:11.18: [30274]: <-- [6:AT&D3\r]
jan 16 20:28:11.34: [30274]: --> [2:OK]
jan 16 20:28:11.34: [30274]: <-- [6:AT&C1\r]
jan 16 20:28:11.50: [30274]: --> [2:OK]
jan 16 20:28:11.50: [30274]: <-- [12:AT+FCLASS=2\r]
jan 16 20:28:11.66: [30274]: --> [2:OK]
jan 16 20:28:11.66: [30274]: <-- [10:AT+FTBC=0\r]
jan 16 20:28:11.82: [30274]: --> [2:OK]
jan 16 20:28:11.82: [30274]: <-- [10:AT+FBOR=0\r]
jan 16 20:28:11.98: [30274]: --> [2:OK]
jan 16 20:28:11.98: [30274]: <-- [13:AT+FPHCTO=30\r]
jan 16 20:28:12.15: [30274]: --> [2:OK]
jan 16 20:28:12.15: [30274]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
jan 16 20:28:12.32: [30274]: --> [2:OK]
jan 16 20:28:12.32: [30274]: <-- [5:ATM0\r]
jan 16 20:28:12.48: [30274]: --> [2:OK]
jan 16 20:28:12.48: [30274]: <-- [12:AT+FCLASS=2\r]
jan 16 20:28:12.75: [30274]: --> [2:OK]
jan 16 20:28:12.75: [30274]: <-- [10:AT+FTBC=0\r]
jan 16 20:28:13.01: [30274]: --> [2:OK]
jan 16 20:28:13.01: [30274]: <-- [10:AT+FBOR=0\r]
jan 16 20:28:13.27: [30274]: --> [2:OK]
jan 16 20:28:13.27: [30274]: <-- [13:AT+FPHCTO=30\r]
jan 16 20:28:13.54: [30274]: --> [2:OK]
jan 16 20:28:13.54: [30274]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
jan 16 20:28:13.81: [30274]: --> [2:OK]
jan 16 20:28:13.81: [30274]: <-- [29:AT+FLID="Mirsots et Associes"\r]
jan 16 20:28:14.08: [30274]: --> [2:OK]
jan 16 20:28:14.08: [30274]: DIAL 0156985541
jan 16 20:28:14.08: [30274]: <-- [16:ATDT0156985541@\r]
jan 16 20:28:36.65: [30274]: --> [5:+FCON]
jan 16 20:28:39.06: [30274]: --> [24:+FNSF:BC 53 01 60 11 01 ]
jan 16 20:28:39.06: [30274]: REMOTE NSF "BC 53 01 60 11 01"
jan 16 20:28:39.06: [30274]: NSF remote fax equipment: unknown
jan 16 20:28:39.06: [30274]: --> [28:+FCSI:"          0156985541"]
jan 16 20:28:39.06: [30274]: REMOTE CSI "0156985541"
jan 16 20:28:39.06: [30274]: --> [21:+FDIS:1,3,0,2,1,2,0,0]
jan 16 20:28:39.06: [30274]: --> [2:OK]
jan 16 20:28:39.06: [30274]: REMOTE best rate 9600 bit/s
jan 16 20:28:39.06: [30274]: REMOTE max page width 1728 pixels in 215 mm
jan 16 20:28:39.06: [30274]: REMOTE max unlimited page length
jan 16 20:28:39.06: [30274]: REMOTE best vres 7.7 line/mm
jan 16 20:28:39.06: [30274]: REMOTE best format 2-D MR
jan 16 20:28:39.06: [30274]: REMOTE supports T.30 Annex C, half duplex ECM
jan 16 20:28:39.06: [30274]: REMOTE best 0 ms/scanline
jan 16 20:28:39.06: [30274]: USE 9600 bit/s
jan 16 20:28:39.06: [30274]: USE 0 ms/scanline
jan 16 20:28:39.06: [30274]: SEND file "docq/doc636.tif;41"
jan 16 20:28:39.07: [30274]: USE page width 1728 pixels in 215 mm
jan 16 20:28:39.07: [30274]: USE unlimited page length
jan 16 20:28:39.07: [30274]: USE 7.7 line/mm
jan 16 20:28:39.07: [30274]: USE 2-D MR
jan 16 20:28:39.07: [30274]: <-- [24:AT+FDIS=1,3,0,2,1,0,0,0\r]
jan 16 20:28:39.39: [30274]: --> [2:OK]
jan 16 20:28:39.39: [30274]: <-- [7:AT+FDT\r]
jan 16 20:28:45.03: [30274]: --> [21:+FDCS:1,3,0,2,1,0,0,0]
jan 16 20:28:45.03: [30274]: --> [7:CONNECT]
jan 16 20:28:45.03: [30274]: SEND wait for XON
jan 16 20:28:45.03: [30274]: --> [1:^Q]
jan 16 20:28:45.03: [30274]: SEND begin page
jan 16 20:29:24.73: [30274]: SENT 52404 bytes of data
jan 16 20:29:24.73: [30274]: SEND end page
jan 16 20:29:29.01: [30274]: -->
[106:^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^
Q^S^Q^S^Q^S^Q^S^Q
^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q
^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q]
jan 16 20:29:29.01: [30274]: --> [2:OK]
jan 16 20:29:29.01: [30274]: SEND send MPS (more pages, same document)
jan 16 20:29:29.01: [30274]: <-- [9:AT+FET=0\r]
jan 16 20:29:45.27: [30274]: --> [8:+FHNG:52]
jan 16 20:29:45.27: [30274]: REMOTE HANGUP: No response to MPS repeated 3
times (code 52)
jan 16 20:29:45.27: [30274]: SEND: No response to MPS repeated 3 times;
Giving up after 3 attempts to send same page "docq/doc
636.tif;41", dirnum 0
jan 16 20:29:45.27: [30274]: <-- [5:ATH0\r]
jan 16 20:29:45.65: [30274]: --> [2:OK]
jan 16 20:29:45.65: [30274]: SESSION END



--
Tardis


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null


Attention:
The information contained in this message and or attachments is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.  Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender and delete the material from any system and destroy any copies.

Any views expressed in this message are those of the individual sender and may not necessarily reflect the views of The Gribbles Group.

Thank You.

This e-mail message has been scanned for Viruses and Content and cleared by MailMarshal


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services