|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Multitech and MPS repeated 3 times sending error
Hello.
I have HylaFAX V 4.1 on a RedHat 7.1 using a Multitech Modem
MT2834ZDXI.
faxaddmodem detects correctly the modem as a Class 2 modem
and uses the default script for Multitech.
When I try to send faxes to certain fax numbers I get an error "No
response to MPS repeated 3 times (code 52)".
For instance, see the session logs hereafter. How can I send faxes
to this particular fax machine ?
Only one page is sent, while the fax has 17 pages...
TIA
---- Transcript of session follows ----
jan 16 20:28:06.98: [30274]: SESSION BEGIN 00000458 330156985541
jan 16 20:28:06.98: [30274]: HylaFAX (tm) Version 4.1
jan 16 20:28:06.98: [30274]: SEND FAX: JOB 104 DEST 0156985541 COMMID 00000458
jan 16 20:28:06.98: [30274]: DEVICE '/dev/ttyS1'
jan 16 20:28:06.98: [30274]: DELAY 75 ms
jan 16 20:28:07.06: [30274]: DELAY 2600 ms
jan 16 20:28:09.66: [30274]: <-- [4:ATZ\r]
jan 16 20:28:10.06: [30274]: --> [2:OK]
jan 16 20:28:10.06: [30274]: <-- [5:ATE0\r]
jan 16 20:28:10.22: [30274]: --> [4:ATE0]
jan 16 20:28:10.22: [30274]: --> [2:OK]
jan 16 20:28:10.22: [30274]: <-- [5:ATV1\r]
jan 16 20:28:10.38: [30274]: --> [2:OK]
jan 16 20:28:10.38: [30274]: <-- [5:ATQ0\r]
jan 16 20:28:10.54: [30274]: --> [2:OK]
jan 16 20:28:10.54: [30274]: <-- [7:ATS0=0\r]
jan 16 20:28:10.70: [30274]: --> [2:OK]
jan 16 20:28:10.70: [30274]: <-- [7:ATS8=2\r]
jan 16 20:28:10.86: [30274]: --> [2:OK]
jan 16 20:28:10.86: [30274]: <-- [8:ATS7=60\r]
jan 16 20:28:11.02: [30274]: --> [2:OK]
jan 16 20:28:11.02: [30274]: <-- [6:AT&E4\r]
jan 16 20:28:11.18: [30274]: --> [2:OK]
jan 16 20:28:11.18: [30274]: <-- [6:AT&D3\r]
jan 16 20:28:11.34: [30274]: --> [2:OK]
jan 16 20:28:11.34: [30274]: <-- [6:AT&C1\r]
jan 16 20:28:11.50: [30274]: --> [2:OK]
jan 16 20:28:11.50: [30274]: <-- [12:AT+FCLASS=2\r]
jan 16 20:28:11.66: [30274]: --> [2:OK]
jan 16 20:28:11.66: [30274]: <-- [10:AT+FTBC=0\r]
jan 16 20:28:11.82: [30274]: --> [2:OK]
jan 16 20:28:11.82: [30274]: <-- [10:AT+FBOR=0\r]
jan 16 20:28:11.98: [30274]: --> [2:OK]
jan 16 20:28:11.98: [30274]: <-- [13:AT+FPHCTO=30\r]
jan 16 20:28:12.15: [30274]: --> [2:OK]
jan 16 20:28:12.15: [30274]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
jan 16 20:28:12.32: [30274]: --> [2:OK]
jan 16 20:28:12.32: [30274]: <-- [5:ATM0\r]
jan 16 20:28:12.48: [30274]: --> [2:OK]
jan 16 20:28:12.48: [30274]: <-- [12:AT+FCLASS=2\r]
jan 16 20:28:12.75: [30274]: --> [2:OK]
jan 16 20:28:12.75: [30274]: <-- [10:AT+FTBC=0\r]
jan 16 20:28:13.01: [30274]: --> [2:OK]
jan 16 20:28:13.01: [30274]: <-- [10:AT+FBOR=0\r]
jan 16 20:28:13.27: [30274]: --> [2:OK]
jan 16 20:28:13.27: [30274]: <-- [13:AT+FPHCTO=30\r]
jan 16 20:28:13.54: [30274]: --> [2:OK]
jan 16 20:28:13.54: [30274]: <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
jan 16 20:28:13.81: [30274]: --> [2:OK]
jan 16 20:28:13.81: [30274]: <-- [29:AT+FLID="Mirsots et Associes"\r]
jan 16 20:28:14.08: [30274]: --> [2:OK]
jan 16 20:28:14.08: [30274]: DIAL 0156985541
jan 16 20:28:14.08: [30274]: <-- [16:ATDT0156985541@\r]
jan 16 20:28:36.65: [30274]: --> [5:+FCON]
jan 16 20:28:39.06: [30274]: --> [24:+FNSF:BC 53 01 60 11 01 ]
jan 16 20:28:39.06: [30274]: REMOTE NSF "BC 53 01 60 11 01"
jan 16 20:28:39.06: [30274]: NSF remote fax equipment: unknown
jan 16 20:28:39.06: [30274]: --> [28:+FCSI:" 0156985541"]
jan 16 20:28:39.06: [30274]: REMOTE CSI "0156985541"
jan 16 20:28:39.06: [30274]: --> [21:+FDIS:1,3,0,2,1,2,0,0]
jan 16 20:28:39.06: [30274]: --> [2:OK]
jan 16 20:28:39.06: [30274]: REMOTE best rate 9600 bit/s
jan 16 20:28:39.06: [30274]: REMOTE max page width 1728 pixels in 215 mm
jan 16 20:28:39.06: [30274]: REMOTE max unlimited page length
jan 16 20:28:39.06: [30274]: REMOTE best vres 7.7 line/mm
jan 16 20:28:39.06: [30274]: REMOTE best format 2-D MR
jan 16 20:28:39.06: [30274]: REMOTE supports T.30 Annex C, half duplex ECM
jan 16 20:28:39.06: [30274]: REMOTE best 0 ms/scanline
jan 16 20:28:39.06: [30274]: USE 9600 bit/s
jan 16 20:28:39.06: [30274]: USE 0 ms/scanline
jan 16 20:28:39.06: [30274]: SEND file "docq/doc636.tif;41"
jan 16 20:28:39.07: [30274]: USE page width 1728 pixels in 215 mm
jan 16 20:28:39.07: [30274]: USE unlimited page length
jan 16 20:28:39.07: [30274]: USE 7.7 line/mm
jan 16 20:28:39.07: [30274]: USE 2-D MR
jan 16 20:28:39.07: [30274]: <-- [24:AT+FDIS=1,3,0,2,1,0,0,0\r]
jan 16 20:28:39.39: [30274]: --> [2:OK]
jan 16 20:28:39.39: [30274]: <-- [7:AT+FDT\r]
jan 16 20:28:45.03: [30274]: --> [21:+FDCS:1,3,0,2,1,0,0,0]
jan 16 20:28:45.03: [30274]: --> [7:CONNECT]
jan 16 20:28:45.03: [30274]: SEND wait for XON
jan 16 20:28:45.03: [30274]: --> [1:^Q]
jan 16 20:28:45.03: [30274]: SEND begin page
jan 16 20:29:24.73: [30274]: SENT 52404 bytes of data
jan 16 20:29:24.73: [30274]: SEND end page
jan 16 20:29:29.01: [30274]: --> [106:^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q
^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q^S^Q]
jan 16 20:29:29.01: [30274]: --> [2:OK]
jan 16 20:29:29.01: [30274]: SEND send MPS (more pages, same document)
jan 16 20:29:29.01: [30274]: <-- [9:AT+FET=0\r]
jan 16 20:29:45.27: [30274]: --> [8:+FHNG:52]
jan 16 20:29:45.27: [30274]: REMOTE HANGUP: No response to MPS repeated 3 times (code 52)
jan 16 20:29:45.27: [30274]: SEND: No response to MPS repeated 3 times; Giving up after 3 attempts to send same page "docq/doc
636.tif;41", dirnum 0
jan 16 20:29:45.27: [30274]: <-- [5:ATH0\r]
jan 16 20:29:45.65: [30274]: --> [2:OK]
jan 16 20:29:45.65: [30274]: SESSION END
--
Tardis
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
