Re: [hylafax-users] Receive multiple pages fails

To: tim@niemueller.de, ml@niemueller.de, Tim Niemueller <tim@niemueller.de>
Subject: Re: [hylafax-users] Receive multiple pages fails
From: Lee Howard <faxguy@server.deanox.com>
Cc: hylafax-users@hylafax.org
Date: Tue, 15 Jan 2002 13:00:07 -0700 (MST)

Please set Class1SwitchingDelay to 75 ms.  All ISDN faxes will fail with the 
4.1 default of 150 ms.  This default will be changed in 4.1.1.

Lee.

Quoting Tim Niemueller <tim@niemueller.de>:

> Hi Hylafax users,
> 
> I have a Sedlbauer Speed Fax+ ISA ISDN Card which has a DSP to allow 
> modem conversation without special drivers.
> 
> Now I have configured hylafax on a RedHat machine (pretty up2date with a
> 
> 2.4 kernel) as described on sedlbauers homepage at 
> http://www.sedlbauer.de/english/kommunikation/linux/RedHat/lredhathyla71.htm
> 
> Now I can send faxes (single and multiple pages) but can only receive 
> faxes with a single page!
> 
> Here is the log of a failed connection. I removed the number:
> 
> --- 8< ---
> 
> Jan 14 20:52:20.66: [20950]: SESSION BEGIN 00000005 123123123123123
> Jan 14 20:52:20.66: [20950]: MODEM set XON/XOFF/FLUSH: input ignored, 
> output disabled
> Jan 14 20:52:20.66: [20950]: <-- [4:ATA\r]
> Jan 14 20:52:25.84: [20950]: --> [7:CONNECT]
> Jan 14 20:52:25.84: [20950]: ANSWER: FAX CONNECTION
> Jan 14 20:52:25.84: [20950]: MODEM input buffering enabled
> Jan 14 20:52:25.84: [20950]: RECV FAX: begin
> Jan 14 20:52:25.84: [20950]: MODEM input buffering disabled
> Jan 14 20:52:25.84: [20950]: <-- data [23]
> Jan 14 20:52:25.84: [20950]: <-- data [2]
> Jan 14 20:52:25.88: [20950]: --> [7:CONNECT]
> Jan 14 20:52:25.88: [20950]: <-- data [10]
> Jan 14 20:52:25.88: [20950]: <-- data [2]
> Jan 14 20:52:27.01: [20950]: --> [2:OK]
> Jan 14 20:52:27.01: [20950]: <-- [9:AT+FRH=3\r]
> Jan 14 20:52:27.28: [20950]: --> [7:CONNECT]
> Jan 14 20:52:28.91: [20950]: --> [2:OK]
> Jan 14 20:52:28.91: [20950]: REMOTE TSI "+123123123123213213"
> Jan 14 20:52:28.91: [20950]: <-- [9:AT+FRH=3\r]
> Jan 14 20:52:28.92: [20950]: --> [7:CONNECT]
> Jan 14 20:52:29.64: [20950]: --> [2:OK]
> Jan 14 20:52:29.64: [20950]: REMOTE wants 14400 bit/s
> Jan 14 20:52:29.64: [20950]: REMOTE wants page width 1728 pixels in 215
> mm
> Jan 14 20:52:29.64: [20950]: REMOTE wants A4 page length (297 mm)
> Jan 14 20:52:29.64: [20950]: REMOTE wants 7.7 line/mm
> Jan 14 20:52:29.64: [20950]: REMOTE wants 2-D MR
> Jan 14 20:52:29.64: [20950]: RECV training at v.17 14400 bit/s
> Jan 14 20:52:29.64: [20950]: MODEM set XON/XOFF/DRAIN: input ignored, 
> output generated
> Jan 14 20:52:29.64: [20950]: <-- [11:AT+FRM=145\r]
> Jan 14 20:52:31.19: [20950]: --> [7:CONNECT]
> Jan 14 20:52:32.88: [20950]: MODEM set XON/XOFF/DRAIN: input ignored, 
> output disabled
> Jan 14 20:52:32.88: [20950]: RECV: TCF 3035 bytes, 6% non-zero, 2699 
> zero-run
> Jan 14 20:52:32.88: [20950]: --> [10:NO CARRIER]
> Jan 14 20:52:32.88: [20950]: DELAY 75 ms
> Jan 14 20:52:32.96: [20950]: <-- [9:AT+FTH=3\r]
> Jan 14 20:52:34.59: [20950]: --> [7:CONNECT]
> Jan 14 20:52:34.59: [20950]: <-- data [3]
> Jan 14 20:52:34.59: [20950]: <-- data [2]
> Jan 14 20:52:34.85: [20950]: --> [2:OK]
> Jan 14 20:52:34.85: [20950]: TRAINING succeeded
> Jan 14 20:52:34.85: [20950]: MODEM input buffering enabled
> Jan 14 20:52:34.85: [20950]: MODEM set XON/XOFF/FLUSH: input ignored, 
> output generated
> Jan 14 20:52:34.85: [20950]: <-- [11:AT+FRM=146\r]
> Jan 14 20:52:35.41: [20950]: --> [7:CONNECT]
> Jan 14 20:52:35.41: [20950]: RECV: begin page
> Jan 14 20:52:47.59: [20950]: RECV: 2354 total lines, 0 bad lines, 0 
> consecutive bad lines
> Jan 14 20:52:47.59: [20950]: RECV: end page
> Jan 14 20:52:47.59: [20950]: --> [10:NO CARRIER]
> Jan 14 20:52:47.59: [20950]: MODEM set XON/XOFF/DRAIN: input ignored, 
> output disabled
> Jan 14 20:52:47.59: [20950]: MODEM input buffering disabled
> Jan 14 20:52:47.59: [20950]: <-- [9:AT+FRH=3\r]
> Jan 14 20:52:47.73: [20950]: --> [7:CONNECT]
> Jan 14 20:52:48.83: [20950]: --> [2:OK]
> Jan 14 20:52:48.83: [20950]: RECV recv MPS (more pages, same document)
> Jan 14 20:52:48.83: [20950]: DELAY 150 ms
> Jan 14 20:52:48.98: [20950]: <-- [9:AT+FTH=3\r]
> Jan 14 20:52:48.98: [20950]: --> [10:NO CARRIER]
> Jan 14 20:52:48.98: [20950]: RECV send MCF (message confirmation)
> Jan 14 20:52:48.98: [20950]: RECV FAX (00000005): from +123123123123213,
> 
> page 1 in 0:14, A4, 7.7 line/mm, 2-D MR, 14400 bit/s
> Jan 14 20:52:48.98: [20950]: MODEM input buffering enabled
> Jan 14 20:52:48.98: [20950]: MODEM set XON/XOFF/FLUSH: input ignored, 
> output generated
> Jan 14 20:52:48.98: [20950]: <-- [11:AT+FRM=146\r]
> Jan 14 20:52:52.20: [20950]: --> [7:CONNECT]
> Jan 14 20:52:52.20: [20950]: RECV: begin page
> Jan 14 20:52:52.20: [20950]: RECV: 0 total lines, 0 bad lines, 0 
> consecutive bad lines
> Jan 14 20:52:52.20: [20950]: RECV: end page
> Jan 14 20:52:52.20: [20950]: --> [10:NO CARRIER]
> Jan 14 20:52:52.20: [20950]: MODEM set XON/XOFF/DRAIN: input ignored, 
> output disabled
> Jan 14 20:52:52.20: [20950]: MODEM input buffering disabled
> Jan 14 20:52:52.20: [20950]: <-- [9:AT+FRH=3\r]
> Jan 14 20:52:52.24: [20950]: --> [7:CONNECT]
> Jan 14 20:52:53.21: [20950]: --> [2:OK]
> Jan 14 20:52:53.21: [20950]: RECV recv MPS (more pages, same document)
> Jan 14 20:52:53.21: [20950]: DELAY 150 ms
> Jan 14 20:52:53.36: [20950]: <-- [9:AT+FTH=3\r]
> Jan 14 20:52:53.36: [20950]: --> [10:NO CARRIER]
> Jan 14 20:52:53.36: [20950]: RECV send MCF (message confirmation)
> Jan 14 20:52:53.36: [20950]: RECV FAX (00000005): from +123123123213213,
> 
> page 2 in 0:05, A4, 7.7 line/mm, 2-D MR, 14400 bit/s
> Jan 14 20:52:53.36: [20950]: MODEM input buffering enabled
> Jan 14 20:52:53.36: [20950]: MODEM set XON/XOFF/FLUSH: input ignored, 
> output generated
> Jan 14 20:52:53.36: [20950]: <-- [11:AT+FRM=146\r]
> Jan 14 20:52:56.70: [20950]: --> [7:CONNECT]
> Jan 14 20:52:56.70: [20950]: RECV: begin page
> Jan 14 20:52:56.70: [20950]: RECV: 0 total lines, 0 bad lines, 0 
> consecutive bad lines
> Jan 14 20:52:56.70: [20950]: RECV: end page
> Jan 14 20:52:56.70: [20950]: --> [10:NO CARRIER]
> Jan 14 20:52:56.70: [20950]: MODEM set XON/XOFF/DRAIN: input ignored, 
> output disabled
> Jan 14 20:52:56.70: [20950]: MODEM input buffering disabled
> Jan 14 20:52:56.70: [20950]: <-- [9:AT+FRH=3\r]
> Jan 14 20:52:56.73: [20950]: --> [7:CONNECT]
> Jan 14 20:52:57.58: [20950]: --> [2:OK]
> Jan 14 20:52:57.58: [20950]: RECV recv MPS (more pages, same document)
> Jan 14 20:52:57.58: [20950]: DELAY 150 ms
> Jan 14 20:52:57.73: [20950]: <-- [9:AT+FTH=3\r]
> Jan 14 20:52:57.73: [20950]: --> [10:NO CARRIER]
> Jan 14 20:52:57.73: [20950]: RECV send MCF (message confirmation)
> Jan 14 20:52:57.73: [20950]: RECV FAX (00000005): from +123123123213, 
> page 3 in 0:04, A4, 7.7 line/mm, 2-D MR, 14400 bit/s
> Jan 14 20:52:57.73: [20950]: MODEM input buffering enabled
> Jan 14 20:52:57.73: [20950]: MODEM set XON/XOFF/FLUSH: input ignored, 
> output generated
> Jan 14 20:52:57.73: [20950]: <-- [11:AT+FRM=146\r]
> Jan 14 20:53:01.36: [20950]: --> [7:CONNECT]
> Jan 14 20:53:01.36: [20950]: RECV: begin page
> Jan 14 20:53:01.36: [20950]: RECV: 0 total lines, 0 bad lines, 0 
> consecutive bad lines
> Jan 14 20:53:01.36: [20950]: RECV: end page
> Jan 14 20:53:01.36: [20950]: --> [10:NO CARRIER]
> Jan 14 20:53:01.36: [20950]: MODEM set XON/XOFF/DRAIN: input ignored, 
> output disabled
> Jan 14 20:53:01.36: [20950]: MODEM input buffering disabled
> Jan 14 20:53:01.36: [20950]: <-- [9:AT+FRH=3\r]
> Jan 14 20:53:01.40: [20950]: --> [7:CONNECT]
> Jan 14 20:53:02.12: [20950]: --> [2:OK]
> Jan 14 20:53:02.12: [20950]: RECV recv DCN
> Jan 14 20:53:02.12: [20950]: RECV FAX (00000005): recvq/fax00003.tif 
> from +123123123123, route to <unspecified>, 3 pages in 0:37
> Jan 14 20:53:02.12: [20950]: RECV FAX: COMREC received DCN
> Jan 14 20:53:02.12: [20950]: <-- [9:AT+FTH=3\r]
> Jan 14 20:53:02.68: [20950]: --> [10:NO CARRIER]
> Jan 14 20:53:02.68: [20950]: MODEM input buffering enabled
> Jan 14 20:53:02.68: [20950]: MODEM input buffering enabled
> Jan 14 20:53:02.68: [20950]: RECV FAX (00000005): session with 
> +123123123 terminated abnormally: COMREC received DCN
> Jan 14 20:53:02.68: [20950]: RECV FAX: bin/faxrcvd "recvq/fax00003.tif"
> 
> "modem" "00000005" "COMREC received DCN"
> Jan 14 20:53:03.03: [20950]: RECV FAX: end
> Jan 14 20:53:03.03: [20950]: SESSION END
> 
> --- 8< ---
> 
> As you can see the connection was just aborted. But what does "COMREC 
> received DCN" mean? Any idea how I can solve this problem?
> 
> Thanks,
> 
> 	Tim
> 
> 
> -- 
>      Tim Niemueller <tim@niemueller.de>      www.niemueller.de
> =================================================================
>   Imagination is more important than knowledge. (Albert Einstein)
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

Follow-Ups:
- Re: [hylafax-users] Receive multiple pages fails
  - From: Tim Niemueller

References:
- [hylafax-users] Receive multiple pages fails
  - From: Tim Niemueller
- [hylafax-users] Receive multiple pages fails
  - From: Tim Niemueller

Prev by Date: Re: [hylafax-users] Hylafax doesn't honor requested permissions
Next by Date: Re: [hylafax-users] Hylafax doesn't honor requested permissions
Previous by thread: [hylafax-users] Receive multiple pages fails
Next by thread: Re: [hylafax-users] Receive multiple pages fails
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services