|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] COMREC invalid command received
I am having problems sending faxes. The setup is as follows: One
Hylafax server with two modems, one on ttyS0 for receiving the other
on ttyS1 for sending faxes (as specified in
/var/spool/hylafax/etc/config --- ModemClass: "any:ttyS1"). Whenever
I try to send a fax either from the server or one of the clients I
get the following errors:
1.- COMREC error > Your facsimile job to 928514355 was not sent
because:
> COMREC invalid command received/no DIS or DTC
>
> The job will be retried at 10:36.
>
> ---- Transcript of session follows ----
>
> Jan 07 10:35:23.57: [ 3567]: SESSION BEGIN 00000245 340928514355
> Jan 07 10:35:23.57: [ 3567]: HylaFAX (tm) Version 4.1
> Jan 07 10:35:23.57: [ 3567]: SEND FAX: JOB 34 DEST 928514355 COMMID
00000245 > Jan 07 10:35:23.57: [ 3567]: DEVICE '/dev/ttyS1'
> Jan 07 10:35:23.57: [ 3567]: DELAY 75 ms
> Jan 07 10:35:23.64: [ 3567]: DELAY 2600 ms
> Jan 07 10:35:26.24: [ 3567]: <-- [4:ATZ\r]
> Jan 07 10:35:26.36: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.36: [ 3567]: <-- [5:ATE0\r]
> Jan 07 10:35:26.37: [ 3567]: --> [4:ATE0]
> Jan 07 10:35:26.37: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.37: [ 3567]: <-- [5:ATV1\r]
> Jan 07 10:35:26.38: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.38: [ 3567]: <-- [5:ATQ0\r]
> Jan 07 10:35:26.39: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.39: [ 3567]: <-- [7:ATS0=0\r]
> Jan 07 10:35:26.40: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.40: [ 3567]: <-- [7:ATS8=2\r]
> Jan 07 10:35:26.41: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.41: [ 3567]: <-- [8:ATS7=60\r]
> Jan 07 10:35:26.42: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.42: [ 3567]: <-- [6:AT&K3\r]
> Jan 07 10:35:26.43: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.43: [ 3567]: <-- [6:AT&D2\r]
> Jan 07 10:35:26.44: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.44: [ 3567]: <-- [6:AT&C1\r]
> Jan 07 10:35:26.45: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.45: [ 3567]: <-- [12:AT+FCLASS=1\r]
> Jan 07 10:35:26.46: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.46: [ 3567]: <-- [7:ATL0M1\r]
> Jan 07 10:35:26.47: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.47: [ 3567]: <-- [12:AT+FCLASS=1\r]
> Jan 07 10:35:26.58: [ 3567]: --> [2:OK]
> Jan 07 10:35:26.59: [ 3567]: DIAL 928514355
> Jan 07 10:35:26.59: [ 3567]: <-- [14:ATDT928514355\r]
> Jan 07 10:35:36.85: [ 3567]: --> [7:CONNECT]
> Jan 07 10:35:37.83: [ 3567]: --> [2:OK]
> Jan 07 10:35:37.83: [ 3567]: COMREC invalid command received/no DIS
or DTC > Jan 07 10:35:37.83: [ 3567]: SEND FAILED: JOB 34 DEST
928514355 ERR
COMREC invalid command received/no DIS or DTC > Jan 07 10:35:37.83: [
3567]: <-- [9:AT+FTH=3\r]
> Jan 07 10:35:37.87: [ 3567]: --> [7:CONNECT]
> Jan 07 10:35:39.19: [ 3567]: --> [2:OK]
> Jan 07 10:35:39.19: [ 3567]: <-- [5:ATH0\r]
> Jan 07 10:35:40.45: [ 3567]: --> [2:OK]
> Jan 07 10:35:40.45: [ 3567]: SESSION END
2.- Busy signal detected.
How can I solve these issues?
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
