Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] fax routing on called number (was: configura




my config:
 ISDN BRI -> zyxel 2864i
 europe

currently i have configured a MSN number:
 AT&ZI6=msn_number

on a zyxel.net isdn modem you have to set
 AT&L1
in addition that the modem recognizes incoming fax calls.
the zyxel.net i have is not connected to the hylfax server.
maybe hylafax does this AT&L1 command on the zyxel 2864i modem for me ...

i have no idea how to get DID numbers out of the modem (zyxel) or how to configure it.

i have less time but if someone wants me to try some config regarding dial in setup
on the xyxel modem - no problem.
we use our modem for outgoning faxes - not for incoming.
so i can play with it...

niki

On 09-Oct-2001 Yan Seiner wrote:
> I am about to launch into this.  I have an ISDN BRI and a digi datafire
> RAS board.  My exact setup is as follows:
> 
> incoming ISDN PRI -> Adtran Atlas 550 -> ISDN BRI -> Digi Datafire RAS
> 4BU -> hylafax.
> 
> The Adtran basically splits off 4 ISDN BRI lines from the PRI (a PRI has
> 23 64K channels available - a difference from Europe where there are
> 30??? channels)
> 
> A couple of things to watch out for:
> 
> Standards in Europe and US/Canada are very different.  DID != DNIS !=
> MSN - how to handle all of these is going to be a localization issue. 
> I'm going to be working with DNIS on ISDN PRI/BRI in the US.
> 
> To make things more fun, there are analog versions of this for DID.  So
> far, the only analog modem board that supports DID I've found is
> Brooktrout, which is not supported under linux, so that closes that
> avenue.
> 
> Anyway, I'd love to have people post/upload configs.  If you want to
> participate, please post clearly what system you are working with
> (US/Canada or Europe) and what service you are dealing with (MSN/DNIS
> etc) and what hardware you have.  I can make my ftp server available if
> needed for config swapping.
> 
> --Yan
> 
> "Niki W. Waibel" wrote:
>> 
>> i would be VERY interested if you get that running!!!
>> 
>> i have the same hardware and i'd like to have DID routing too.
>> 
>> unfort i have no time to dig into the modem config...
>> 
>> niki w. waibel
>> 
>> On 03-Oct-2001 Poirier Xavier wrote:
>> > HI,
>> >
>> > Is there someone who configured a HYLAFAX server on linux with :
>> > A zyxel Modem 2864I
>> > A dispatching of fax received on "called number" (I mean a group of numbers
>> > redirected on one number where is the modem - with a PBX)
>> > A linux system
>> >
>> > I am trying to make a config clean for doing this and would be great to share
>> > experience with someone who made this configuration .
>> >
>> > THANKS A LOT !
>> >
>> > Xavier Poirier
>> > Service Informatique
>> > Hôpital Fleyriat
>> > tél: 04 74 45 41 17
>> > mailto: xpoirier@ch-bourg01.fr
>> 
>> --
>> niki w. waibel - system administrator @ newlogic technologies ag
>> 
>> ____________________ HylaFAX(tm) Users Mailing List _______________________
>>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
> 

-- 
niki w. waibel - system administrator @ newlogic technologies ag


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services