|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] Legal size faxes
...my config file.
I have also included my config file.
> Well, I am having some isues doing an archive search, the mirror points
> to the
> original site for the archives, and I am not coming up with it off of
> the
> website, so I have to ask. What am I likely doing wrong if a legal size
> fax is
> getting cut off at letter when received? I\\\'ve included a log from an
> offending
> fax. I am running 4.1 on a Red Hat 7.1 box. I have three Multitech
> MT1932ZDX
> modems, and I have also included
>
> Josh Welch
> Computer Support Specialist
> Buffalo Wild Wings
> 952-278-9557
>
> Sep 19 15:05:54.69: [ 698]: SESSION BEGIN 00007400 19525939787
> Sep 19 15:05:54.69: [ 698]: <-- [4:ATA\\\\r]
> Sep 19 15:06:02.63: [ 698]: --> [5:+FCON]
> Sep 19 15:06:02.63: [ 698]: ANSWER: FAX CONNECTION
> Sep 19 15:06:02.64: [ 698]: RECV FAX: begin
> Sep 19 15:06:07.08: [ 698]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
> Sep 19 15:06:07.08: [ 698]: REMOTE wants 14400 bit/s
> Sep 19 15:06:07.08: [ 698]: REMOTE wants page width 1728 pixels in
> 215mm
> Sep 19 15:06:07.08: [ 698]: REMOTE wants unlimited page length
> Sep 19 15:06:07.09: [ 698]: REMOTE wants 3.85 line/mm
> Sep 19 15:06:07.09: [ 698]: REMOTE wants 2-D MR
> Sep 19 15:06:07.09: [ 698]: --> [2:OK]
> Sep 19 15:06:07.09: [ 698]: <-- [7:AT+FDR\\\\r]
> Sep 19 15:06:08.52: [ 698]: --> [5:+FCFR]
> Sep 19 15:06:08.52: [ 698]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
> Sep 19 15:06:08.52: [ 698]: REMOTE wants 14400 bit/s
> Sep 19 15:06:08.52: [ 698]: REMOTE wants page width 1728 pixels in
> 215mm
> Sep 19 15:06:08.53: [ 698]: REMOTE wants unlimited page length
> Sep 19 15:06:08.53: [ 698]: REMOTE wants 3.85 line/mm
> Sep 19 15:06:08.53: [ 698]: REMOTE wants 2-D MR
> Sep 19 15:06:09.08: [ 698]: --> [7:CONNECT]
> Sep 19 15:06:09.08: [ 698]: RECV: begin page
> Sep 19 15:06:09.08: [ 698]: RECV: send trigger 022
> Sep 19 15:06:09.08: [ 698]: <-- data [1]
> Sep 19 15:06:20.69: [ 698]: RECV: 19029 bytes of data, 1072 total
> lines
> Sep 19 15:06:20.70: [ 698]: --> [15:+FPTS:1,0,0,0,0]
> Sep 19 15:06:21.98: [ 698]: --> [6:+FET:0]
> Sep 19 15:06:21.98: [ 698]: RECV recv MPS (more pages, same document)
> Sep 19 15:06:21.98: [ 698]: --> [2:OK]
> Sep 19 15:06:21.99: [ 698]: RECV send MCF (message confirmation)
> Sep 19 15:06:21.99: [ 698]: RECV FAX (00007400): from , page 1 in 0:14,
> INF,
> 3.85 line/mm, 2-D MR, 14400 bit/s
> Sep 19 15:06:21.99: [ 698]: <-- [7:AT+FDR\\\\r]
> Sep 19 15:06:24.00: [ 698]: --> [7:CONNECT]
> Sep 19 15:06:24.00: [ 698]: RECV: begin page
> Sep 19 15:06:24.00: [ 698]: RECV: send trigger 022
> Sep 19 15:06:24.00: [ 698]: <-- data [1]
> Sep 19 15:06:43.15: [ 698]: RECV: 32724 bytes of data, 967 total
> lines
> Sep 19 15:06:50.66: [ 698]: RECV: 13393 bytes of data, 1371 total
> lines
> Sep 19 15:06:50.67: [ 698]: --> [15:+FPTS:1,0,0,0,0]
> Sep 19 15:06:51.95: [ 698]: --> [6:+FET:2]
> Sep 19 15:06:51.95: [ 698]: RECV recv EOP (no more pages or
> documents)
> Sep 19 15:06:51.95: [ 698]: --> [2:OK]
> Sep 19 15:06:51.96: [ 698]: RECV send MCF (message confirmation)
> Sep 19 15:06:51.96: [ 698]: RECV FAX (00007400): from , page 2 in 0:30,
> INF,
> 3.85 line/mm, 2-D MR, 14400 bit/s
> Sep 19 15:06:51.96: [ 698]: RECV FAX (00007400): recvq/fax00397.tif
> from,
> route to <unspecified>, 2 pages in 0:49
> Sep 19 15:06:51.96: [ 698]: <-- [7:AT+FDR\\\\r]
> Sep 19 15:06:54.66: [ 698]: --> [7:+FHNG:0]
> Sep 19 15:06:54.66: [ 698]: REMOTE HANGUP: Normal and proper end of
> connection
> (code 0)
> Sep 19 15:06:54.66: [ 698]: RECV FAX:
> bin/faxrcvd \\\"recvq/fax00397.tif\\\" \\\"ttyS2\\\" \\\"00007400\\\" \\\"\\\"
>
> ------------------------------------------------------------------------------
-
> # Configuration for a Multi-Tech MT1432, MT224BA, and MT1932ZDX
> modems.
> #
> # MT1432 firmware rev 0307 I or newer
> # MT132BG rev 0109A
> # MT1932ZDX rev 0109H
> #
> # Note that MT1432 modems come in several varieties:
> #
> # MT1432BA uses Rockwell data pump
> # MT1432BA/A uses AT&T data pump
> # MT1432BG MT1432BA tweaked for German FCC
> # MT1432MK (for UK?)
> #
> # The modem has been tried with both XON/XOFF and RTS/CTS flow
> # control; this configuration is for hardware flow control.
> #
> #
> CountryCode: 1
> AreaCode: 953
> FAXNumber: 1.952.593.9787
> LongDistancePrefix: 1
> InternationalPrefix: 011
> DialStringRules: etc/dialrules
>
> ServerTracing: 1
> SessionTracing: 11
> RecvFileMode: 0600
> LogFileMode: 0600
> DeviceMode: 0600
> RingsBeforeAnswer: 1
> SpeakerVolume: off
> GettyArgs: \\\"-h %l dx_%s\\\"
> LocalIdentifier: \\\"BUFFALO WILD WINGS\\\"
> TagLineFont: etc/lutRS18.pcf
> TagLineFormat: \\\"From %%l|%c|Page %%P of %%T\\\"
> MaxRecvPages: 50
> #
> #
> # Modem-related stuff: should reflect modem command interface
> # and hardware connection/cabling (e.g. flow control).
> #
> ModemType: Class2 # use class 2 interface
> ModemRate: 38400 # lock rate for DCE-DTE
> communication
> ModemFlowControl: rtscts # default
> #
> ModemHardFlowCmd: AT&E4 # hardware flow control
> ModemSoftFlowCmd: AT&E5 # software flow control
> ModemSetupDTRCmd: AT&D3 # setup so DTR drop resets
> modem
> ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier
> (or not)
> ModemSetupAACmd: AT+FAA=1 # enable adaptive-answer in
> class 2
> ModemRecvFillOrder: LSB2MSB # Suppose to be the right option
> for
> Multitech, other option MSB2LSB
> #
> # NB: some models get confused by the @
> #
> ModemDialCmd: ATDT%s@ # T for tone dialing, @ for
> silence
> #
> RecvDataFormat: adaptive
> Class2RecvDataTrigger: \\\"\\\\022\\\" # character sent to modem to
> start recv
> ~
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
> To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org <
> /dev/null
>
Josh Welch
Computer Support Specialist
Buffalo Wild Wings
952-278-9557
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
