Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] Legal size faxes



Well, I am having some isues doing an archive search, the mirror points to the 
original site for the archives, and I am not coming up with it off of the 
website, so I have to ask. What am I likely doing wrong if a legal size fax is 
getting cut off at letter when received? I\'ve included a log from an offending 
fax. I am running 4.1 on a Red Hat 7.1 box. I have three Multitech MT1932ZDX 
modems, and I have also included 

Josh Welch
Computer Support Specialist
Buffalo Wild Wings
952-278-9557

Sep 19 15:05:54.69: [  698]: SESSION BEGIN 00007400 19525939787
Sep 19 15:05:54.69: [  698]: <-- [4:ATA\\r]
Sep 19 15:06:02.63: [  698]: --> [5:+FCON]
Sep 19 15:06:02.63: [  698]: ANSWER: FAX CONNECTION
Sep 19 15:06:02.64: [  698]: RECV FAX: begin
Sep 19 15:06:07.08: [  698]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
Sep 19 15:06:07.08: [  698]: REMOTE wants 14400 bit/s
Sep 19 15:06:07.08: [  698]: REMOTE wants page width 1728 pixels in 215mm
Sep 19 15:06:07.08: [  698]: REMOTE wants unlimited page length
Sep 19 15:06:07.09: [  698]: REMOTE wants 3.85 line/mm
Sep 19 15:06:07.09: [  698]: REMOTE wants 2-D MR
Sep 19 15:06:07.09: [  698]: --> [2:OK]
Sep 19 15:06:07.09: [  698]: <-- [7:AT+FDR\\r]
Sep 19 15:06:08.52: [  698]: --> [5:+FCFR]
Sep 19 15:06:08.52: [  698]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
Sep 19 15:06:08.52: [  698]: REMOTE wants 14400 bit/s
Sep 19 15:06:08.52: [  698]: REMOTE wants page width 1728 pixels in 215mm
Sep 19 15:06:08.53: [  698]: REMOTE wants unlimited page length
Sep 19 15:06:08.53: [  698]: REMOTE wants 3.85 line/mm
Sep 19 15:06:08.53: [  698]: REMOTE wants 2-D MR
Sep 19 15:06:09.08: [  698]: --> [7:CONNECT]
Sep 19 15:06:09.08: [  698]: RECV: begin page
Sep 19 15:06:09.08: [  698]: RECV: send trigger 022
Sep 19 15:06:09.08: [  698]: <-- data [1]
Sep 19 15:06:20.69: [  698]: RECV: 19029 bytes of data, 1072 total lines
Sep 19 15:06:20.70: [  698]: --> [15:+FPTS:1,0,0,0,0]
Sep 19 15:06:21.98: [  698]: --> [6:+FET:0]
Sep 19 15:06:21.98: [  698]: RECV recv MPS (more pages, same document)
Sep 19 15:06:21.98: [  698]: --> [2:OK]
Sep 19 15:06:21.99: [  698]: RECV send MCF (message confirmation)
Sep 19 15:06:21.99: [  698]: RECV FAX (00007400): from , page 1 in 0:14, INF, 
3.85 line/mm, 2-D MR, 14400 bit/s
Sep 19 15:06:21.99: [  698]: <-- [7:AT+FDR\\r]
Sep 19 15:06:24.00: [  698]: --> [7:CONNECT]
Sep 19 15:06:24.00: [  698]: RECV: begin page
Sep 19 15:06:24.00: [  698]: RECV: send trigger 022
Sep 19 15:06:24.00: [  698]: <-- data [1]
Sep 19 15:06:43.15: [  698]: RECV: 32724 bytes of data, 967 total lines
Sep 19 15:06:50.66: [  698]: RECV: 13393 bytes of data, 1371 total lines
Sep 19 15:06:50.67: [  698]: --> [15:+FPTS:1,0,0,0,0]
Sep 19 15:06:51.95: [  698]: --> [6:+FET:2]
Sep 19 15:06:51.95: [  698]: RECV recv EOP (no more pages or documents)
Sep 19 15:06:51.95: [  698]: --> [2:OK]
Sep 19 15:06:51.96: [  698]: RECV send MCF (message confirmation)
Sep 19 15:06:51.96: [  698]: RECV FAX (00007400): from , page 2 in 0:30, INF, 
3.85 line/mm, 2-D MR, 14400 bit/s
Sep 19 15:06:51.96: [  698]: RECV FAX (00007400): recvq/fax00397.tif from, 
route to <unspecified>, 2 pages in 0:49
Sep 19 15:06:51.96: [  698]: <-- [7:AT+FDR\\r]
Sep 19 15:06:54.66: [  698]: --> [7:+FHNG:0]
Sep 19 15:06:54.66: [  698]: REMOTE HANGUP: Normal and proper end of connection 
(code 0)
Sep 19 15:06:54.66: [  698]: RECV FAX: 
bin/faxrcvd \"recvq/fax00397.tif\" \"ttyS2\" \"00007400\" \"\"

-------------------------------------------------------------------------------
# Configuration for a Multi-Tech MT1432, MT224BA, and MT1932ZDX modems.
#
# MT1432        firmware rev 0307 I or newer
# MT132BG       rev 0109A
# MT1932ZDX     rev 0109H
#
# Note that MT1432 modems come in several varieties:
#
# MT1432BA      uses Rockwell data pump
# MT1432BA/A    uses AT&T data pump
# MT1432BG      MT1432BA tweaked for German FCC
# MT1432MK      (for UK?)
#
# The modem has been tried with both XON/XOFF and RTS/CTS flow
# control; this configuration is for hardware flow control.
#
#
CountryCode:            1
AreaCode:               953
FAXNumber:              1.952.593.9787
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules

ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              \"-h %l dx_%s\"
LocalIdentifier:        \"BUFFALO WILD WINGS\"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          \"From %%l|%c|Page %%P of %%T\"
MaxRecvPages:           50
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class2          # use class 2 interface
ModemRate:              38400           # lock rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemHardFlowCmd:       AT&E4           # hardware flow control
ModemSoftFlowCmd:       AT&E5           # software flow control
ModemSetupDTRCmd:       AT&D3           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or not)
ModemSetupAACmd:        AT+FAA=1        # enable adaptive-answer in class 2
ModemRecvFillOrder:     LSB2MSB         # Suppose to be the right option for 
Multitech, other option MSB2LSB
#
# NB: some models get confused by the @
#
ModemDialCmd:           ATDT%s@         # T for tone dialing, @ for silence
#
RecvDataFormat:         adaptive
Class2RecvDataTrigger:  \"\\022\"          # character sent to modem to start recv
~


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services