Re: [hylafax-users] error with MPS

["Carl Morgan" <Carl.Morgan@noaa.gov>]

For example, if I send a 2 page fax (one page is the cover sheet), only the cover sheet is received. I
believe it is only received once each time but I can't verify this.

How do I restrict the signalling rate?

Thanks!

Vyacheslav Frolov wrote:

> Carl Morgan wrote:
>
> > I'm faxing to 4 machines. Recently, one of these machines started failing after receiving the
> > cover page.
>
> Was the cover page reseived ? 3 times ?
>
> > The log looks like this:
> >
> > Sep 03 14:13:02.40: [16551]: SEND send MPS (more pages, same document)
> > Sep 03 14:13:02.40: [16551]: <-- [9:AT+FET=0\r]
> > Sep 03 14:13:23.92: [16551]: --> [8:+FHNG:52]
> > Sep 03 14:13:23.92: [16551]: REMOTE HANGUP: No response to MPS repeated 3 times (code 52)
> > Sep 03 14:13:23.92: [16551]: SEND: No response to MPS repeated 3 times; Giving up after 3 attempts
> > to send same page "docq/doc1067.cover;31", dirnum 0
>
> > I found that error code 52 relates to multi-page send failing
>
> Do you mean that there is not failing for one-page document?
>
> > when the fax machines can't "train". Is there some configuration that I can try on my end to
> > alleviate this problem,
>
> At first try to restrict signalling rate (especially if it's more then 9600).
>
> > or is it a problem on the receiving end only?
>
> There is a lot of reasons for this problem :(
>
> > Thanks for any help!
> >
> > Carl



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null