|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] zyxel u-1496e config
At 09:12 AM 8/28/01 -0500, Dan wrote:
....
>At 04:23 PM 8/27/01 -0500, Dan wrote:
>>I just installed redhat 7.1 and hylafax 4.1 my modem is a
>>Zyxel u-1496e with the latest firmware. I have tried this modem in
>>both class 1 and class 2. I am getting lots (all most all) of: Failure to
>>train remote
>> modem at 2400 bps or minimum speed; Giving up after 3 attempts to send
>same
>>page
....
>Aug 20 20:51:21.73: [13126]: SESSION BEGIN 00002958 12142149437352
>Aug 20 20:51:21.73: [13126]: SEND FAX: JOB 2834 DEST xxx-xxx-xxxx COMMID
>00002958
>Aug 20 20:51:21.73: [13126]: MODEM set DTR OFF
>Aug 20 20:51:21.73: [13126]: DELAY 2600 ms
>Aug 20 20:51:24.32: [13126]: MODEM set DTR ON
>Aug 20 20:51:24.33: [13126]: MODEM set baud rate: 19200 baud, input flow
>XON/XOFF, output flow XON/XOFF
>Aug 20 20:51:24.33: [13126]: MODEM flush i/o
>Aug 20 20:51:24.33: [13126]: <-- [4:ATZ\r]
>Aug 20 20:51:25.06: [13126]: --> [2:OK]
>Aug 20 20:51:25.06: [13126]: <-- [15:ATE0V1Q0S0=0H0\r]
>Aug 20 20:51:25.08: [13126]: --> [14:ATE0V1Q0S0=0H0]
>Aug 20 20:51:25.08: [13126]: --> [2:OK]
From what I see, you're definitely not using 4.1 faxgetty. What is your
init string in /etc/inittab for faxgetty?
Lee.
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
