Re: [hylafax-users] Hylafax on SunBlade 100 ?

[Lee Howard <faxguy@deanox.com>]

At 10:12 AM 8/27/01 -0400, Ronald Florence wrote:

>For many years we've run a Hylafax server on a Sparc-5 and then on a
>Sparc-20, using Hylafax-4.0pl2 and a Multitech MT1932ZDX modem with
>Solaris-2.6.  Since changing the server machine to a SunBlade 100
>running Solaris-8 4/01:
>
>  1. We have to use xon/xoff flow-control instead of the Hylafax
>  default cts/rts flow-control.  The latter results in no error
>  messages from Hylafax, but sent faxes are cut off about 2-inches
>  from the top of the page.
>
>  2. On the SunBlade 100, when the modem reinitializes itself after
>  sending a fax, Hylafax sends out an email message reporting that the
>  modem appears to be `wedged.'  The modem is in fact correctly
>  initialized.  I tried changing the MaxSetupAttempts to 3 and
>  ModemResetDelay to 4000 to eliminate these bogus error messages,
>  with no apparent effect.

I'd guess that your config file is wrong for your modem.  If you set your
ServerTracing to 0xFFF, restart faxgetty, and then review the system log,
you should see where the error is occurring.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null