Re: [hylafax-users] No carrier detected - even line is free

["Niki W. Waibel" <niki.waibel@newlogic.com>]

here is my hack for the "No carrier detected" problem:

etc/config.ttyS0:
=================
JobReqNoCarrier:        10              # this happens so often that i set
                                        # it to 10sec (default: 300sec)
JobReqOther:            10              # default: 300
NoCarrierRetries:       3               # default: 1
=================

i also added this to the
 etc/config
file because it seemed not to work.
but i might have been wrong - i was very busy and had no time to check.

this stuff just sets the waiting time from 5min to 10sec if a NO CARRIER error
and "other errors" occur on the modem.
it also sets the no carrier retires from 1 to 3.

it seems so work for me better with this options - but i have not tested deeply.

niki


On 21-Aug-2001 Niki W. Waibel wrote:
> 
> i often get the error: "No carrier detected"
> with a ZyXEL 2864I modem.
> it is connected to a free ISDN line.
> i am sure that the line is NOT used!
> 
> after some retries the modem gets the line and sends the fax...
> 
> is anyone else having this problem?
> 
> ===
># root # @fax-gw /usr/local/opt/hylafax/4.1/var/spool/hylafax/etc # faxstat -s
> HylaFAX scheduler on fax-gw.newlogic.at: Running
> Modem ttyS0 (+43.5577.85121): Waiting for modem to come ready
> 
> JID  Pri S  Owner Number       Pages Dials     TTS Status
> 14   126 S   root 6800088       0:2   1:12   13:45 No carrier detected
> ===


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null