|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] configuration for USR/3COM 56K voice PCI modem
I read in one of the mails to this list about some configurations that I do
not find on my SuSE 7.1 distribution. I can not find the configurations on
the hylafax web site. I am trying to find a configuration that will work for
my Dell 56K PCI voice-fax-modem. (It seems to have a couple of moniker in
the documentation and yet another when the modem is probed.) I am running
this on a Dell 4100 Pentium III system.
I am not familiar with many of the terms used in talking about modem or fax
interfaces and the modem HOWTO didn't shed much light on the subject for this
project so any help will be appreciated.
I have included the output of probemodem as this was suggested in the
previous posting I read. BTW I had faxgetty running when I ran this.
TIA, Kurt Rahlfs
----------------
Serial port that modem is connected to []?
Now we are going to probe the tty port. This takes a few seconds,
so be patient. Note that if you do not have the modem cabled to
the port, or the modem is turned off, this may hang (just go and
cable up the modem or turn it on, or whatever).
Probing for best speed to talk to modem: 38400 OK.
[1]+ Terminated ( trap 0 1 2; while true; do
sleep 10; echo ""; echo "Hmm, something seems to be hung, check your
modem eh?";
done )
This looks like a Class 1+2.0 modem.
/bin/stty: standard input: unable to perform all requested operations
ATI0 RESULT = "OK" RESPONSE = "5601"
/bin/stty: standard input: unable to perform all requested operations
ATI1 RESULT = "OK" RESPONSE = "6511"
/bin/stty: standard input: unable to perform all requested operations
ATI2 RESULT = "OK" RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
ATI3 RESULT = "OK" RESPONSE = "U.S. Robotics 56K Voice INT V5.19.1"
Class 1 stuff...
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2.0,8"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS? RESULT = "OK" RESPONSE = "2.0"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FJUNK=? RESULT = "ERROR" RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FJUNK? RESULT = "ERROR" RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA=? RESULT = "OK" RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FAE=? RESULT = "ERROR" RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FAE? RESULT = "ERROR" RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FTH=? RESULT = "OK" RESPONSE =
"3,24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FRH=? RESULT = "OK" RESPONSE =
"3,24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FTM=? RESULT = "OK" RESPONSE =
"3,24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FRM=? RESULT = "OK" RESPONSE =
"3,24,48,72,73,74,96,97,98,121,122,145,146"
/bin/stty: standard input: unable to perform all requested operations
AT+FTS=? RESULT = "ERROR" RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FRS=? RESULT = "ERROR" RESPONSE = "ERROR"
Class 2.0 stuff...
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=? RESULT = "OK" RESPONSE = "0,1,2.0,8"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS? RESULT = "OK" RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=0 RESULT = "OK" RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=1 RESULT = "OK" RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS=2.0 RESULT = "OK" RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FCLASS? RESULT = "OK" RESPONSE = "2.0"
/bin/stty: standard input: unable to perform all requested operations
AT+FJU=? RESULT = "ERROR" RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FJU? RESULT = "ERROR" RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FDR=? RESULT = "ERROR" RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FDT=? RESULT = "ERROR" RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FIP=? RESULT = "OK" RESPONSE = "000"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA=? RESULT = "OK" RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FAA? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FBS? RESULT = "OK" RESPONSE = "1800,4000"
/bin/stty: standard input: unable to perform all requested operations
AT+FBO=? RESULT = "OK" RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FBO? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FBU=? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FBU? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FCC=? RESULT = "OK" RESPONSE =
"(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)"
/bin/stty: standard input: unable to perform all requested operations
AT+FCC? RESULT = "OK" RESPONSE = "1,5,0,2,0,0,0,5"
/bin/stty: standard input: unable to perform all requested operations
AT+FCQ=? RESULT = "OK" RESPONSE = "(0-2),(0-2)"
/bin/stty: standard input: unable to perform all requested operations
AT+FCQ? RESULT = "OK" RESPONSE = "1,0"
/bin/stty: standard input: unable to perform all requested operations
AT+FCR=? RESULT = "OK" RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FCR? RESULT = "OK" RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FCS=? RESULT = "ERROR" RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FCS? RESULT = "OK" RESPONSE = "0,0,0,0,0,0,0,0"
/bin/stty: standard input: unable to perform all requested operations
AT+FCT=? RESULT = "OK" RESPONSE = "(0-255)"
/bin/stty: standard input: unable to perform all requested operations
AT+FCT? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FEA=? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FEA? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FFC=? RESULT = "OK" RESPONSE = "0,0,0,0"
/bin/stty: standard input: unable to perform all requested operations
AT+FFC? RESULT = "OK" RESPONSE = "0,0,0, "
/bin/stty: standard input: unable to perform all requested operations
AT+FHS=? RESULT = "ERROR" RESPONSE = "ERROR"
/bin/stty: standard input: unable to perform all requested operations
AT+FHS? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FIE=? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FIE? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FIS=? RESULT = "OK" RESPONSE =
"(0,1),(0-5),(0-2),(0-2),0,0,0,(0-7)"
/bin/stty: standard input: unable to perform all requested operations
AT+FIS? RESULT = "OK" RESPONSE = "1,5,0,2,0,0,0,5"
/bin/stty: standard input: unable to perform all requested operations
AT+FLI=? RESULT = "OK" RESPONSE = "(20-7E)"
/bin/stty: standard input: unable to perform all requested operations
AT+FLI? RESULT = "OK" RESPONSE = """"
/bin/stty: standard input: unable to perform all requested operations
AT+FLO=? RESULT = "OK" RESPONSE = "(0-2)"
/bin/stty: standard input: unable to perform all requested operations
AT+FLO? RESULT = "OK" RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FLP=? RESULT = "OK" RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FLP? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FMI? RESULT = "OK" RESPONSE = "U.S. Robotics 56K Voice"
/bin/stty: standard input: unable to perform all requested operations
AT+FMM? RESULT = "OK" RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FMR? RESULT = "OK" RESPONSE = "OK"
/bin/stty: standard input: unable to perform all requested operations
AT+FMS=? RESULT = "OK" RESPONSE = "(0-5)"
/bin/stty: standard input: unable to perform all requested operations
AT+FMS? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FNR=? RESULT = "OK" RESPONSE = "(0,1),(0,1),(0,1),(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FNR? RESULT = "OK" RESPONSE = "0,0,0,0"
/bin/stty: standard input: unable to perform all requested operations
AT+FNS=? RESULT = "OK" RESPONSE = "(20-7E)"
/bin/stty: standard input: unable to perform all requested operations
AT+FNS? RESULT = "OK" RESPONSE = """"
/bin/stty: standard input: unable to perform all requested operations
AT+FPI=? RESULT = "OK" RESPONSE = "(20-7E)"
/bin/stty: standard input: unable to perform all requested operations
AT+FPI? RESULT = "OK" RESPONSE = """"
/bin/stty: standard input: unable to perform all requested operations
AT+FPP=? RESULT = "OK" RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FPP? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FPR=? RESULT = "OK" RESPONSE = "(0,1,2,4,8,16,24)"
/bin/stty: standard input: unable to perform all requested operations
AT+FPR? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FPS=? RESULT = "OK" RESPONSE = "(1-5)"
/bin/stty: standard input: unable to perform all requested operations
AT+FPS? RESULT = "OK" RESPONSE = "1"
/bin/stty: standard input: unable to perform all requested operations
AT+FRQ=? RESULT = "OK" RESPONSE = "(0-2),(0-2)"
/bin/stty: standard input: unable to perform all requested operations
AT+FRQ? RESULT = "OK" RESPONSE = "0,N"
/bin/stty: standard input: unable to perform all requested operations
AT+FRY=? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FRY? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FSP=? RESULT = "OK" RESPONSE = "(0,1)"
/bin/stty: standard input: unable to perform all requested operations
AT+FSP? RESULT = "OK" RESPONSE = "0"
/bin/stty: standard input: unable to perform all requested operations
AT+FKS=? RESULT = "OK" RESPONSE = "000"
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
