[hylafax-users] Solved: Frequent transmission breakdowns HF4.1 undHF4.1b3

[Peter Bauer <p.bauer@itserv-gmbh.com>]

That's it. Problem solved.

Thank you very much for your advice (even though I still don't understand why this problem was there)

Peter

-----Ursprüngliche Nachricht-----
Von:	Mark Wilson (P. Kay Associates Ltd.) [SMTP:percy@woodrow.demon.co.uk]
Gesendet am:	Mittwoch, 18. Juli 2001 11:11
An:	Peter Bauer
Cc:	hylafax-users@hylafax.org
Betreff:	Re: [hylafax-users] Frequent transmission breakdowns HF4.1 undHF4.1b3

Hi,

Looks like Hylafax & your modem are using different flow control
(probably 1 uses XON/XOFF, the other hardware..)

Best Regards,

Mark Wilson

P. Kay Associates Ltd.


On Tue, 17 Jul 2001, Peter Bauer wrote:

> Jul 17 22:47:53.31: [ 5961]: TRAINING succeeded
> Jul 17 22:47:53.31: [ 5961]: <-- [10:AT+FTM=96\r]
> Jul 17 22:47:53.34: [ 5961]: --> [7:CONNECT]
> Jul 17 22:47:53.34: [ 5961]: SEND begin page
> Jul 17 22:47:53.34: [ 5961]: <-- data [1027]
> Jul 17 22:47:53.34: [ 5961]: <-- data [1024]
> Jul 17 22:47:53.34: [ 5961]: <-- data [1024]
> Jul 17 22:47:53.34: [ 5961]: <-- data [1024]
> Jul 17 22:47:53.34: [ 5961]: <-- data [1024]
> Jul 17 22:47:53.34: [ 5961]: <-- data [1024]
> Jul 17 22:47:53.34: [ 5961]: <-- data [1024]
> Jul 17 22:47:53.34: [ 5961]: <-- data [1025]
> Jul 17 22:47:53.34: [ 5961]: <-- data [1024]
> Jul 17 22:47:53.34: [ 5961]: <-- data [1025]
> Jul 17 22:47:53.34: [ 5961]: <-- data [1024]
> Jul 17 22:47:53.34: [ 5961]: <-- data [1026]
> Jul 17 22:47:53.34: [ 5961]: <-- data [1027]
> Jul 17 22:47:53.34: [ 5961]: <-- data [413]
> Jul 17 22:47:53.34: [ 5961]: SENT 13719 bytes of data

         ^^^^^^^^^^^ 13 k in 1/100 s ?




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null