Re: [hylafax-users] faxstat

[Gregor Fajdiga <Gregor.Fajdiga@select-tech.si>]

what am I supposed to do, to see what both modems are doing.
-
regards,
 
gregor



On Thu, 21 Jun 2001 13:19:44 +0200
Gregor Fajdiga <Gregor.Fajdiga@select-tech.si> wrote:

> I have also wondered about faxstat, because I have two modems
> configured but it only shows one modem.
> 
> Modem ttyS0 (1111111): Waiting for modem to come ready
> 
> -
> regards,
> 
> gregor.
> 
> On Thu, 21 Jun 2001 12:31:47 +0200
> Giulio Orsero <giulioo@pobox.com> wrote:
> 
> > On Thu, 21 Jun 2001 12:32:40 +0200, you wrote:
> > 
> > >faxstat always says:
> > >HylaFAX scheduler on faxsrv: Running
> > >Modem ttyS0 (1111111): Waiting for modem to come ready
> > 
> > >even if I say cu -l /dev/ttyS0 and then ATZ and then close connection,
> > >file still exists. is it up to hylafax to manage (erase, update or
> > >whatever) this file, or should I erase it. even if I restart hylafax
> > >this file still exists.
> > >
> > >I have send only environment, without any faxgetty and faxaddmodem was
> > >run for each configured modem.
> > If you use faxmodem, instead of faxgetty, the status reported by faxstat will be
> > different:
> > 1-after installing HylaFAX for the first time and before sending the 1st fax,
> > the modem status won't be shown
> > 2- after sending the 1st fax, the status will always be
> > Modem ttySX (+12345678): Waiting for modem to come ready
> > when the modem is idle
> > 3- only while sending a fax the status will be changed to "initializing server"
> > and "sending job xxx"
> > 
> > -- 
> > giulioo@pobox.com
> > 
> > 
> > ____________________ HylaFAX(tm) Users Mailing List _______________________
> >  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null