Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
Re: [hylafax-users] faxing from certain senders to me fails, error no carrier!
TeijoTykkÄ wrote:
> Normal inboundfax:
>
> May 15 09:35:09.53: [ 827]: SESSION BEGIN 00000329 3589736020
> May 15 09:35:09.54: [ 827]: <-- [4:ATA\r]
> May 15 09:35:20.06: [ 827]: --> [5:+FCON]
> May 15 09:35:20.06: [ 827]: ANSWER: FAX CONNECTION
> ... and so on
>
> but sometimes
>
> May 10 09:37:47.11: [ 827]: SESSION BEGIN 00000301 3589736020
> May 10 09:37:47.12: [ 827]: <-- [4:ATA\r]
> May 10 09:37:52.16: [ 827]: --> [10:NO CARRIER]
> May 10 09:37:52.16: [ 827]: ANSWER: Ring detected without successful handshake
> May 10 09:37:52.16: [ 827]: SESSION END
>
> what's wrong. My or remote fault? Only sertain senders machines.
>
> 4.1 beta3 (rpm from hylafax.org) on rh 6.2
>
> My config file:
>
> ModemType: Class2 # use this to supply a hint
> ModemRate: 19200 # max rate for DCE-DTE communication
> ModemFlowControl: rtscts # XON/XOFF flow control assumed
> ModemNoFlowCmd: AT\Q0 # disable flow control cmd
> ModemSoftFlowCmd: AT\Q1 # software flow control cmd
> ModemHardFlowCmd: AT\Q3 # hardware flow control cmd
> ModemSetupDTRCmd: AT&D3 # DTR off causes modem to reset
> ModemSetupDCDCmd: AT&C1 # DCD follows carrier
> ModemSetupAACmd: AT+FAA=1 # enable adaptive-answer in Class 2
try AT+FAA=0
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null