Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] FAX MACHINE connections seen as DATA connections



Lee, 

You hit the nail on the head!  BRAVO!

Changing the Adaptive Answer setting caused the issue of FAX MACHINE 
connections being interpreted as incoming DATA connections to go away.

Thanks for the speedy (and accurate) advice.

g.


Quoting Lee Howard <faxguy@deanox.com>:

> At 01:25 AM 4/10/01 -0700, Graham Leach wrote:
> >Hello everyone,
> >
> >Why would faxgetty see an incoming connection from a FAX MACHINE as a
> DATA 
> >connection?
> 
> You could try changing your Adaptive Answer setting.  I.e. disable it
> or
> change it to AT+FCLASS=[1|2|2.0]  You *can* make faxgetty answer every
> incoming call as a fax.  You modem also probably has some AT commands
> or
> S-registers that can be set to force this to happen, too.
> 
> Lee.
> 
> 


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services