Re: [hylafax-users] DTE to DCE data underflow

[Lee Howard <faxguy@deanox.com>]

At 06:00 PM 4/10/01 +0200, Laurent wrote:
>Lee Howard wrote:
>> Probably no flow control.  Did faxaddmodem detect your modem properly, or
>> did you have to enter in a bunch of AT commands?
>
>Yes it was a flow control problem, and yes I had to enter a lot of
>AT commands,but I leave them to default and just change the flow
>control to rts/cts, but the ModemFlowControl was commented in 
>config.ttyS1, I just decommented it and the ModemHardFlowCmd and
>now it works !!

Be prepared to encounter other troubles, then.  Just "leaving them to
default" is not a good approach - as is apparent by the flow control.
Either faxaddmodem needs to pick the modem a default prototype config, or
you need to refer to the user's manual.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null