[hylafax-users] hfaxd: scheduler NAK'd request

[kennon <kennon@skyflow.com>]

hi,
ive been trying to use hfaxd for sending faxes, with little success. 
everything seems to work fine until i actually attempt to submit the job, 
at which point i get an error  "460 Failed to submit job xxx: Unspecified 
reason (scheduler NAK'd request)." heres a transcript of the commands i 
inputted, and their results:

telnet localhost 4559
Trying 127.0.0.1...
Connected to localhost.localdomain.
Escape character is '^]'.
220 sfdev1.corp.skyflow.com server (HylaFAX (tm) Version 4.1beta2) ready.
user kennon
230 User kennon logged in.
ls
500 LS: Command not recognized.
jnew
200 New job created: jobid: 952 groupid: 952.
jparm dialstring 15105940805
213 DIALSTRING set to "15105940805".
jparm notifyaddr kennon@skyflow.com
213 NOTIFYADDR set to "kennon@skyflow.com".
jparm document refcard.ps
200 Added document refcard.ps as docqrefcard.ps.952.
jparm
217-Job state: jobid 952 groupid 952
     SENDTIME: NOW
     LASTTIME: 000300
     RETRYTIME: 0000
     STATE: SUSPENDED
     NOTIFY: NONE
     PAGECHOP: DEFAULT
     CHOPTHRESHOLD: 3
     DATAFORMAT: G4
     USEECM: YES
     USETAGLINE: NO
     USECONTCOVER: YES
     JOBTYPE: facsimile
     EXTERNAL:
     DIALSTRING: 15105940805
     NOTIFYADDR: kennon@skyflow.com
     USRKEY:
     MODEM: any
     TOUSER:
     TOCOMPANY:
     TOLOCATION:
     FROMUSER: kennon
     PASSWD:
     CLIENT: localhost.localdomain
     TAGLINE:
     SUBADDR:
     GROUPID: 952
     JOBID: 952
     JOBINFO:
     OWNER: kennon
     STATUS:
     DONEOP: default
     COMMID:
     TOTPAGES: 0
     NPAGES: 0
     NTRIES: 0
     NDIALS: 0
     TOTDIALS: 0
     MAXDIALS: 12
     TOTTRIES: 0
     MAXTRIES: 3
     PAGEWIDTH: 0
     PAGELENGTH: 0
     VRES: 196
     SCHEDPRI: 127
     MINBR: 0
     BEGBR: 5
     BEGST: 0
     DOCUMENT: PS docqrefcard.ps.952
217 End of job 952 state.
jparm document
213-PS docqrefcard.ps.952
213 End of documents.
jsubm
460 Failed to submit job 952: Unspecified reason (scheduler NAK'd request).

heres the email i received indicating the failure of this job:

Your facsimile job to 5551234 could not be completed before the appointed 
deadline.
---- Unsent job status ----
Destination: 15105940805
JobID: 952
GroupID: 952
Mailaddr: kennon@skyflow.com
Submitted From: localhost.localdomain
Page Width: 0 (mm)
Page Length: 0 (mm)
Resolution: 196 (lpi)
Status: (nothing available)
Dialogs: 0 (exchanges with remote device)
Dials: 0 (consecutive failed calls to destination)
Calls: 0 (total phone calls placed)
Pages: 0 (pages transmitted)
TotPages: 0 (total pages to transmit)
Attempts: 0 (attempts to send current page)
Dirnum: 0 (directory of next page to send)
---- Documents submitted for transmission ----
The following documents were submitted for transmission and are
available on the server for reuse until they are automatically
purged when this job is removed. Documents may also be manually
removed using the faxrm command; consult faxrm(1) for information.
Filename Size Type
docqrefcard.ps.952 0 PostScript


the same basic command works fine through sendfax (sendfax -d 15105940805 
refcard.ps). is there any other param that i neglected to set? i noticed 
that there were a couple other people who posted the same problem on this 
mailing list, but no one seemed to have any solutions. also, is there any 
documentation on the params that the jparm command takes? i couldnt find 
anything in the manpages, online, or in the hfaxd source.

thanks in advance!
kennon lee



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null