|
Hylafax Mailing List Archives
|
[Date Prev][Date Next][Thread Prev][Thread Next]
[Date Index]
[Thread Index]
[hylafax-users] Very Very Desperate Newbie
I asked this question two days ago and got one answer
ensuring I had
used the correct version for Redhat 6.2, which I have.
I have gone back over the doco, troubleshooting, etc and
cannot find
an answer to my problems. I really want to use HylaFAX but
cannot
if I cannot get it working. It seems 90% there.
Reiterating:
Redhat 6.2
hylafax-4.1beta3-1rh6
hylafax-htmldoc-4.1beta3-1rh6
log details are:
Mar 06 20:55:12.18: [21777]: SESSION BEGIN 00000024
61738030216
Mar 06 20:55:12.19: [21777]: SEND FAX: JOB 16 DEST 38030216
COMMID 00000024
Mar 06 20:55:12.19: [21777]: DELAY 2600
ms
Mar 06 20:55:14.78: [21777]: <--
[4:ATZ\r]
Mar 06 20:55:14.91: [21777]: -->
[2:OK]
Mar 06 20:55:14.91: [21777]: <--
[15:ATE0V1Q0S0=0H0\r]
Mar 06 20:55:14.93: [21777]: -->
[14:ATE0V1Q0S0=0H0]
Mar 06 20:55:14.93: [21777]: -->
[2:OK]
Mar 06 20:55:14.93: [21777]: <--
[21:ATS8=2S7=60&K3&D3&C1\r]
Mar 06 20:55:14.95: [21777]: -->
[2:OK]
Mar 06 20:55:14.95: [21777]: <--
[12:AT+FCLASS=2\r]
Mar 06 20:55:14.97: [21777]: -->
[2:OK]
Mar 06 20:55:14.97: [21777]: <--
[10:AT+FTBC=0\r]
Mar 06 20:55:14.99: [21777]: -->
[2:OK]
Mar 06 20:55:14.99: [21777]: <--
[10:AT+FBOR=0\r]
Mar 06 20:55:15.01: [21777]: -->
[2:OK]
Mar 06 20:55:15.01: [21777]: <--
[13:AT+FPHCTO=30\r]
Mar 06 20:55:15.03: [21777]: -->
[2:OK]
Mar 06 20:55:15.03: [21777]: <--
[24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Mar 06 20:55:15.05: [21777]: -->
[2:OK]
Mar 06 20:55:15.05: [21777]: <--
[5:ATM0\r]
Mar 06 20:55:15.06: [21777]: -->
[2:OK]
Mar 06 20:55:15.06: [21777]: <--
[12:AT+FCLASS=2\r]
Mar 06 20:55:15.18: [21777]: -->
[2:OK]
Mar 06 20:55:15.18: [21777]: <--
[10:AT+FTBC=0\r]
Mar 06 20:55:15.30: [21777]: -->
[2:OK]
Mar 06 20:55:15.30: [21777]: <--
[10:AT+FBOR=0\r]
Mar 06 20:55:15.42: [21777]: -->
[2:OK]
Mar 06 20:55:15.42: [21777]: <--
[13:AT+FPHCTO=30\r]
Mar 06 20:55:15.54: [21777]: -->
[2:OK]
Mar 06 20:55:15.54: [21777]: <--
[24:AT+FDCC=1,5,2,2,0,0,0,0\r]
Mar 06 20:55:15.66: [21777]: -->
[2:OK]
Mar 06 20:55:15.66: [21777]: <-- [12:AT+FLID="
"\r]
Mar 06 20:55:15.78: [21777]: -->
[2:OK]
Mar 06 20:55:15.78: [21777]: DIAL
38030216
Mar 06 20:55:15.78: [21777]: <--
[13:ATDT38030216\r]
Mar 06 20:55:31.65: [21777]: -->
[5:+FCON]
Mar 06 20:55:34.00: [21777]: --> [29:+FCSI: "
38030216"]
Mar 06 20:55:34.00: [21777]: REMOTE CSI
"38030216"
Mar 06 20:55:34.42: [21777]: --> [22:+FDIS:
1,3,0,2,1,0,0,2]
Mar 06 20:55:34.42: [21777]: --> [2:OK]
Mar 06 20:55:34.42: [21777]: REMOTE best rate 9600
bit/s
Mar 06 20:55:34.42: [21777]: REMOTE max page width 1728
pixels in 215 mm
Mar 06 20:55:34.42: [21777]: REMOTE max unlimited page
length
Mar 06 20:55:34.42: [21777]: REMOTE best vres 7.7
line/mm
Mar 06 20:55:34.42: [21777]: REMOTE best format 2-D
MR
Mar 06 20:55:34.42: [21777]: REMOTE best 10 ms, 5
ms/scanline
Mar 06 20:55:34.42: [21777]: USE 9600
bit/s
Mar 06 20:55:34.42: [21777]: USE 10 ms, 5
ms/scanline
Mar 06 20:55:34.42: [21777]: SEND file
"docq/doc16.cover;01"
Mar 06 20:55:34.42: [21777]: USE page width 1728 pixels in
215 mm
Mar 06 20:55:34.42: [21777]: USE unlimited page
length
Mar 06 20:55:34.42: [21777]: USE 7.7
line/mm
Mar 06 20:55:34.42: [21777]: USE 1-D
MR
Mar 06 20:55:34.42: [21777]: <--
[24:AT+FDIS=1,3,0,2,0,0,0,2\r]
Mar 06 20:55:34.55: [21777]: -->
[2:OK]
Mar 06 20:55:34.55: [21777]: <--
[7:AT+FDT\r]
Mar 06 20:55:41.00: [21777]: --> [22:+FDCS:
1,3,0,2,0,0,0,1]
Mar 06 20:55:41.00: [21777]: -->
[7:CONNECT]
Mar 06 20:55:41.00: [21777]: SEND wait for
XON
Mar 06 20:55:41.00: [21777]: -->
[1:^Q]
Mar 06 20:55:41.00: [21777]: SEND begin
page
Mar 06 20:55:54.35: [21777]: SENT 30190 bytes of data
Mar 06 20:55:54.35: [21777]: SEND end
page
Mar 06 20:55:58.20: [21777]: -->
[2:OK]
Mar 06 20:55:58.20: [21777]: SEND send MPS (more pages, same
document)
Mar 06 20:55:58.20: [21777]: <--
[9:AT+FET=0\r]
Mar 06 20:56:01.26: [21777]: --> [8:+FPTS:
2]
Mar 06 20:56:01.26: [21777]: -->
[2:OK]
Mar 06 20:56:01.26: [21777]: SEND recv RTN (retrain
negative)
Mar 06 20:56:01.26: [21777]: <--
[24:AT+FDIS=1,2,0,2,0,0,0,2\r]
Mar 06 20:56:01.38: [21777]: -->
[2:OK]
Mar 06 20:56:01.38: [21777]: <--
[7:AT+FDT\r]
Mar 06 20:56:08.77: [21777]: --> [22:+FDCS:
1,1,0,2,0,0,0,1]
Mar 06 20:56:08.77: [21777]: -->
[7:CONNECT]
Mar 06 20:56:08.77: [21777]: SEND wait for
XON
Mar 06 20:56:08.77: [21777]: -->
[1:^Q]
Mar 06 20:56:08.77: [21777]: SEND begin
page
Mar 06 20:56:32.27: [21777]: SENT 30190 bytes of
data
Mar 06 20:56:32.27: [21777]: SEND end
page
Mar 06 20:56:38.76: [21777]: -->
[2:OK]
Mar 06 20:56:38.76: [21777]: SEND send MPS (more pages, same
document)
Mar 06 20:56:38.76: [21777]: <--
[9:AT+FET=0\r]
Mar 06 20:56:41.87: [21777]: --> [8:+FPTS:
2]
Mar 06 20:56:41.87: [21777]: --> [2:OK]
Mar 06 20:56:41.87: [21777]: SEND recv RTN (retrain
negative)
Mar 06 20:56:41.87: [21777]: <--
[24:AT+FDIS=1,1,0,2,0,0,0,2\r]
Mar 06 20:56:41.99: [21777]: -->
[2:OK]
Mar 06 20:56:41.99: [21777]: <--
[7:AT+FDT\r]
Mar 06 20:56:49.83: [21777]: --> [22:+FDCS:
1,0,0,2,0,0,0,1]
Mar 06 20:56:49.83: [21777]: -->
[7:CONNECT]
Mar 06 20:56:49.83: [21777]: SEND wait for
XON
Mar 06 20:56:49.83: [21777]: -->
[1:^Q]
Mar 06 20:56:49.83: [21777]: SEND begin
page
Mar 06 20:57:35.60: [21777]: SENT 30190 bytes of
data
Mar 06 20:57:35.60: [21777]: SEND end
page
Mar 06 20:57:46.84: [21777]: -->
[2:OK]
Mar 06 20:57:46.84: [21777]: SEND send MPS (more pages, same
document)
Mar 06 20:57:46.84: [21777]: <--
[9:AT+FET=0\r]
Mar 06 20:57:49.94: [21777]: --> [8:+FPTS:
2]
Mar 06 20:57:50.05: [21777]: -->
[2:OK]
Mar 06 20:57:50.05: [21777]: SEND recv RTN (retrain
negative)
Mar 06 20:57:50.05: [21777]: <--
[6:AT+FK\r]
Mar 06 20:57:55.68: [21777]: --> [9:+FHNG:
50]
Mar 06 20:57:55.68: [21777]: REMOTE HANGUP: Unspecified
Transmit Phase D error,
including +FPHCTO timeout between data and +FET command
(code 50)
Mar 06 20:57:57.11: [21777]: --> [2:OK]
Mar 06 20:57:57.11: [21777]: <-- [5:ATH0\r]
Mar 06 20:57:57.22: [21777]: --> [2:OK]
Mar 06 20:57:57.22: [21777]: SESSION END
An alternate ending to the logs is:
Mar 06 21:11:35.77: [21827]: SENT 30204 bytes of
data
Mar 06 21:11:35.77: [21827]: <-- data
[2]
Mar 06 21:11:35.77: [21827]: SEND end
page
Mar 06 21:11:43.89: [21827]: --> [9:+FHNG:
43]
Mar 06 21:11:43.89: [21827]: REMOTE HANGUP: DTE to DCE data
underflow (code 43)
Mar 06 21:11:45.32: [21827]: -->
[2:OK]
Mar 06 21:11:45.32: [21827]: SEND: DTE to DCE data
underflow; Giving up after 3
attempts to send same page "docq/doc16.cover;01", dirnum
0
Mar 06 21:11:45.32: [21827]: <--
[5:ATH0\r]
Mar 06 21:11:45.44: [21827]: -->
[2:OK]
Mar 06 21:11:45.44: [21827]: SESSION END
Please, please help
Ken Cole
____________________ HylaFAX(tm) Users Mailing List _______________________
To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
