[hylafax-users] Sendpage Paging problems

["Caruso, Anthony J." <acaruso@fna.com>]

All:

Forgive me if this post is too long, I wanted to ensure each step was
correct....

The fax has been working nicely for a few days.  Since I can't leave well
enough alone, I want to try paging.

So,

read all paging related man pages	(check)
search the mail list			(yep)
try, try, try again			(si)
dork with it until I pull my hair out		(oui)

now I post :-)

I modified setup.cache for
HFAXD_SNPP_SERVER='yes'

and restarted the daemon
/etc/rc.d/init.d/hylafax stop
/etc/rc.d/init.d/hylafax start

a quick netstat -vatn showed port 444 nice-n-happy.

I setup a simple etc/pagemap file

tony	281631xxxx

and did 
/usr/local/bin/pagesend -q -n -p tony 5551212

And what do I get?  An e-mail saying

Your pager job to tony could not be completed before the appointed deadline.

    ---- Unsent job status ----

   Destination: tony
         JobID: 59
       GroupID: 59
        Sender: root
      Mailaddr: root@faxer.fna.com
        CommID: 00000082
Submitted From: localhost.localdomain
        Status: Can not setup modem
       Dialogs: 0 (exchanges with remote device)
         Dials: 0 (consecutive failed calls to destination)
         Calls: 0 (total phone calls placed)

    ---- Unsent pages submitted for transmission ----

       PIN tony


So, test sending a fax - perhaps I hosed something.  Nope - faxes just fine.

So....

I look at c00000082 in etc/log and see:
[root@faxer log]# cat *82
Feb 21 21:09:56.25: [ 5503]: SESSION BEGIN 00000082 1713281631XXXX
Feb 21 21:09:56.25: [ 5503]: SEND PAGE: JOB 59 DEST 281631XXXX COMMID
00000082
Feb 21 21:09:56.25: [ 5503]: DELAY 2600 ms
Feb 21 21:09:58.85: [ 5503]: <-- [4:ATZ\r]
Feb 21 21:10:01.45: [ 5503]: MODEM <Timeout>
Feb 21 21:10:01.45: [ 5503]: PAGE FAILED: Can not setup modem
Feb 21 21:10:01.45: [ 5503]: SESSION END

I look at my server trace and see:
.....blablabla
Feb 21 21:10:28 faxer FaxGetty[12834]: MODEM Supports 40 ms, 20 ms/scanline
Feb 21 21:10:28 faxer FaxGetty[12834]: MODEM Supports 40 ms/scanline
Feb 21 21:10:28 faxer FaxGetty[12834]: <-- [9:AT+FRM=?\r]
Feb 21 21:10:28 faxer FaxGetty[12834]: -->
[41:3,24,48,72,73,74,96,97,98,121,122
,145,146]
Feb 21 21:10:28 faxer FaxGetty[12834]: --> [2:OK]
Feb 21 21:10:28 faxer FaxGetty[12834]: <-- [12:AT+FCLASS=1\r]
Feb 21 21:10:28 faxer FaxGetty[12834]: --> [2:OK]
Feb 21 21:10:28 faxer FaxGetty[12834]: MODEM SPORTSTER 33600/FAX V1.1 3361/
Feb 21 21:10:28 faxer FaxGetty[12834]: <-- [7:ATL1M1\r]
Feb 21 21:10:28 faxer FaxGetty[12834]: --> [2:OK]
Feb 21 21:10:28 faxer FaxGetty[12834]: STATE CHANGE: LOCKWAIT -> RUNNING
Feb 21 21:10:28 faxer FaxGetty[12834]: MODEM input buffering disabled
Feb 21 21:26:48 faxer FaxQueuer[5262]: JOB 59 (sleeping dest +1281631xxxx
pri 124 tts 1:30 killtime 0:00): KILL TIME EXPIRED
Feb 21 21:26:48 faxer FaxQueuer[5262]: NOTIFY: bin/notify "doneq/q59"
"timedout"

I look in etc/info to see if maybe I can set something up in the 1281631xxxx
file like FAQ 502 & 506 say, but there is not a new file in etc/info.

And no page to me.

Can anyone tell me where I am going wrong?  The modem never even clicks, so
it can't be my pager service (yet).  Modem is USR 28.8, and works nicely for
class 1 faxes (I could prove it with my logs, but this post is long enough
already!)

Thanks in advance.

-Tony



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null