Re: [hylafax-users] Problem after failed fax

[Lee Howard <faxguy@deanox.com>]

At 05:05 PM 2/2/01 +0100, Alex Kiesel wrote:
>Hi! 
>
>When I send a fax to a number where there is no answer, the log looks
>like this:
>
>Jan 26 12:45:04.30: [20792]: SESSION BEGIN 00000202 4972125
>Jan 26 12:45:04.30: [20792]: SEND FAX: JOB 37 DEST **25 COMMID 00000202
>Jan 26 12:45:26.15: [20792]: SEND FAILED: Busy signal detected
>Jan 26 12:45:26.26: [20792]: SESSION END
>
>That's quite ok, but after that when I send another fax to another
>number, the log is the same, except the number has changed.
>There is no ring, the modem doesn't send anything.

Hmmm... we saw this problem before.  Check the mail archives.  It always
happened when there was a busy signal and then the next call was always to
the same number (that's abnormal - I get busy signals all the time here
without that problem).  If I remember right, it turned out to be a
defective modem... but if it wasn't that it was fixed by a HylaFAX upgrade.

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null