Re: [hylafax-users] Hayes Accura 56K Modems -Resend

[Dmitry Bely <dbely@mail.ru>]

Andrew McRory <amacc@iron-bridge.net> writes:

> > I am writing once again to enquire if there anyone who has used a Hayes
> > Accura 56K with HylaFAX and has had any issues with them. I am happily
> 
> Maybe this config file will help? It is for the internal hayes acura 56
> (4704US) that is currentl;y shipped by Zoom.... works for us flawlessly
> 
> === start ===============================================================
[...]
> # $Id: hzacura-56i v0.01
> # Feb 17 23:16:33 faxgate FaxGetty[619]: MODEM ZOOM V.90 ISA I052099V -A Z207
> # Zoom/Hayes Acura 56K V.90 Internal ISA Modem
> #
> # CONFIG: CLASS2: Zoom?V?90?ISA?I052099gV??A?Z207*-RTSCTS
> # CONFIG: CLASS2: Zoom?V?90?ISA?I052099gV??A?Z207*-DEFAULT
> #
> # BEGIN-SERVER
> # END-SERVER
> #
> #
> # Modem-related stuff: should reflect modem command interface
> # and hardware connection/cabling (e.g. flow control).
> #
> ModemType:              Class2          # use this to supply a hint
> ModemRate:              115200          # max rate for DCE-DTE communication

Might be too fast for fax mode. I tend to use 19200 for all modems.

> ModemFlowControl:       rtscts          # XON/XOFF flow control assumed

Very doubtful that it works flawlessly. For most modems
ModemFlowControl=rtscts is not enough to activate hardware flow
control. You should also specify an appropriate
ModemHardFlowCmd/Class2HFLOCmd (consult your modem manual). Or you may
choose software (xonxoff) flow control.

> ModemRecvFillOrder:     MSB2LSB         # bit order of received facsimile
> ModemSetupAACmd:        AT+FAA=1        # enable in current class

Are you really using adaptive amswer feature? If not, comment this line, it 
will make incoming connections faster and more reliable.

> Class2RecvDataTrigger:  ""              # character sent to modem to start recv
> Class2XmitWaitForXON:   yes             # if true, wait for XON before send

Useless lines (these are default values); can be ommited.
> === end =================================================================

Hope to hear from you soon,
Dmitry


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null