[hylafax-users] remote Unspecified Transmit with EOP

To: <hylafax-users@hylafax.org>
Subject: [hylafax-users] remote Unspecified Transmit with EOP
From: tony tsun <ttsun@ouhk.edu.hk>
Date: 19 Oct 2000 15:10

Hi!

My hylafax has the following problem. I cannot indicate why the remote 
unspecified transmit with EOP. Please help me. Thanks.

Tony Tsun

>Date: Thu, 19 Oct 2000 13:28:49 +0800
>From: Facsimile Agent <fax@itu.cuhk.edu.hk>
>To: root@itu.cuhk.edu.hk
>Subject: facsimile job 29 to 927998066 failed
>
>Your facsimile job to 927998066 failed because:
>     Unspecified Transmit Phase D error, including +FPHCTO timeout between 
> data and +FET command; Giving up after 3 attempts to send same page
>
>     ---- Transcript of session follows ----
>
>Oct 19 13:24:36.49: [ 1597]: SESSION BEGIN 00000026 852927998066
>Oct 19 13:24:36.49: [ 1597]: SEND FAX: JOB 29 DEST 927998066 COMMID 00000026
>Oct 19 13:24:36.49: [ 1597]: DELAY 2600 ms
>Oct 19 13:24:39.09: [ 1597]: <-- [4:ATZ\r]
>Oct 19 13:24:39.23: [ 1597]: --> [2:OK]
>Oct 19 13:24:39.23: [ 1597]: <-- [15:ATE0V1Q0S0=0H0\r]
>Oct 19 13:24:39.37: [ 1597]: --> [14:ATE0V1Q0S0=0H0]
>Oct 19 13:24:39.37: [ 1597]: --> [2:OK]
>Oct 19 13:24:39.37: [ 1597]: <-- [12:ATS8=2S7=60\r]
>Oct 19 13:24:39.51: [ 1597]: --> [2:OK]
>Oct 19 13:24:39.51: [ 1597]: <-- [14:AT+FCLASS=2.0\r]
>Oct 19 13:24:39.65: [ 1597]: --> [2:OK]
>Oct 19 13:24:39.65: [ 1597]: <-- [9:AT+FLO=0\r]
>Oct 19 13:24:39.79: [ 1597]: --> [2:OK]
>Oct 19 13:24:39.79: [ 1597]: <-- [9:AT+FPP=0\r]
>Oct 19 13:24:39.93: [ 1597]: --> [2:OK]
>Oct 19 13:24:39.93: [ 1597]: <-- [9:AT+FBO=0\r]
>Oct 19 13:24:40.07: [ 1597]: --> [2:OK]
>Oct 19 13:24:40.07: [ 1597]: <-- [10:AT+FCT=30\r]
>Oct 19 13:24:40.21: [ 1597]: --> [2:OK]
>Oct 19 13:24:40.21: [ 1597]: <-- [15:AT+FNR=1,1,1,1\r]
>Oct 19 13:24:40.35: [ 1597]: --> [2:OK]
>Oct 19 13:24:40.35: [ 1597]: <-- [9:AT+FIE=0\r]
>Oct 19 13:24:40.49: [ 1597]: --> [2:OK]
>Oct 19 13:24:40.49: [ 1597]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
>Oct 19 13:24:40.64: [ 1597]: --> [2:OK]
>Oct 19 13:24:40.64: [ 1597]: <-- [5:ATM0\r]
>Oct 19 13:24:40.78: [ 1597]: --> [2:OK]
>Oct 19 13:24:40.78: [ 1597]: <-- [14:AT+FCLASS=2.0\r]
>Oct 19 13:24:41.02: [ 1597]: --> [2:OK]
>Oct 19 13:24:41.02: [ 1597]: <-- [9:AT+FLO=0\r]
>Oct 19 13:24:41.26: [ 1597]: --> [2:OK]
>Oct 19 13:24:41.26: [ 1597]: <-- [9:AT+FPP=0\r]
>Oct 19 13:24:41.50: [ 1597]: --> [2:OK]
>Oct 19 13:24:41.50: [ 1597]: <-- [9:AT+FBO=0\r]
>Oct 19 13:24:41.74: [ 1597]: --> [2:OK]
>Oct 19 13:24:41.74: [ 1597]: <-- [10:AT+FCT=30\r]
>Oct 19 13:24:41.98: [ 1597]: --> [2:OK]
>Oct 19 13:24:41.98: [ 1597]: <-- [15:AT+FNR=1,1,1,1\r]
>Oct 19 13:24:42.22: [ 1597]: --> [2:OK]
>Oct 19 13:24:42.22: [ 1597]: <-- [9:AT+FIE=0\r]
>Oct 19 13:24:42.46: [ 1597]: --> [2:OK]
>Oct 19 13:24:42.46: [ 1597]: <-- [23:AT+FCC=1,5,2,2,0,0,0,0\r]
>Oct 19 13:24:42.71: [ 1597]: --> [2:OK]
>Oct 19 13:24:42.71: [ 1597]: <-- [13:AT+FLI="TSI"\r]
>Oct 19 13:24:42.95: [ 1597]: --> [2:OK]
>Oct 19 13:24:42.95: [ 1597]: DIAL 927998066
>Oct 19 13:24:42.95: [ 1597]: <-- [14:ATDT927998066\r]
>Oct 19 13:24:58.15: [ 1597]: --> [4:+FCO]
>Oct 19 13:25:01.40: [ 1597]: --> [36:+FNF:…ÈIOUHK (IT UNIT)  ]
>Oct 19 13:25:01.40: [ 1597]: REMOTE NSF "…ÈIOUHK (IT UNIT)  "
>Oct 19 13:25:01.40: [ 1597]: NSF remote fax equipment: unknown
>Oct 19 13:25:01.40: [ 1597]: --> [27:+FCI:"       +852 27998066"]
>Oct 19 13:25:01.40: [ 1597]: REMOTE CSI "+852 27998066"
>Oct 19 13:25:01.40: [ 1597]: --> [20:+FIS:1,3,0,2,1,0,0,5]
>Oct 19 13:25:01.40: [ 1597]: --> [2:OK]
>Oct 19 13:25:01.40: [ 1597]: REMOTE best rate 9600 bit/s
>Oct 19 13:25:01.40: [ 1597]: REMOTE max page width 1728 pixels in 215 mm
>Oct 19 13:25:01.40: [ 1597]: REMOTE max unlimited page length
>Oct 19 13:25:01.40: [ 1597]: REMOTE best vres 7.7 line/mm
>Oct 19 13:25:01.40: [ 1597]: REMOTE best format 2-D MR
>Oct 19 13:25:01.40: [ 1597]: REMOTE best 20 ms/scanline
>Oct 19 13:25:01.40: [ 1597]: USE 9600 bit/s
>Oct 19 13:25:01.40: [ 1597]: USE 20 ms/scanline
>Oct 19 13:25:01.40: [ 1597]: SEND file "docq/doc37.ps;01"
>Oct 19 13:25:01.40: [ 1597]: USE page width 1728 pixels in 215 mm
>Oct 19 13:25:01.40: [ 1597]: USE unlimited page length
>Oct 19 13:25:01.40: [ 1597]: USE 7.7 line/mm
>Oct 19 13:25:01.40: [ 1597]: USE 1-D MR
>Oct 19 13:25:01.40: [ 1597]: <-- [23:AT+FIS=1,3,0,2,0,0,0,5\r]
>Oct 19 13:25:01.65: [ 1597]: --> [2:OK]
>Oct 19 13:25:01.65: [ 1597]: <-- [7:AT+FDT\r]
>Oct 19 13:25:01.93: [ 1597]: --> [20:+FCS:1,3,0,2,0,0,0,5]
>Oct 19 13:25:08.02: [ 1597]: --> [7:CONNECT]
>Oct 19 13:25:08.02: [ 1597]: SEND begin page
>Oct 19 13:25:14.01: [ 1597]: SENT 13124 bytes of data
>Oct 19 13:25:14.02: [ 1597]: SEND 1D RTC
>Oct 19 13:25:14.02: [ 1597]: SEND end page
>Oct 19 13:25:14.02: [ 1597]: SEND send EOP (no more pages or documents)
>Oct 19 13:28:14.01: [ 1597]: REMOTE HANGUP: Unspecified Transmit Phase D 
>error, including +FPHCTO timeout between data and +FET command (code 50)
>Oct 19 13:28:14.01: [ 1597]: <-- [7:AT+FKS\r]
>Oct 19 13:28:44.01: [ 1597]: MODEM <Timeout>
>Oct 19 13:28:44.01: [ 1597]: SEND: Unspecified Transmit Phase D error, 
>including +FPHCTO timeout between data and +FET command; Giving up after 3 
>attempts to send same page "docq/doc37.ps;01", dirnum 0
>Oct 19 13:28:44.01: [ 1597]: <-- [5:ATH0\r]
>Oct 19 13:28:49.01: [ 1597]: MODEM <Timeout>
>Oct 19 13:28:49.01: [ 1597]: SESSION END
>
>     ---- Unsent job status ----
>
>    Destination: 927998066
>          JobID: 29
>        GroupID: 29
>         Sender: tester
>       Mailaddr: root@itu.cuhk.edu.hk
>         CommID: 00000026
>Submitted From: itu.cuhk.edu.hk
>     Page Width: 194 (mm)
>    Page Length: 281 (mm)
>     Resolution: 196 (lpi)
>         Status: Unspecified Transmit Phase D error, including +FPHCTO 
> timeout between data and +FET command; Giving up after 3 attempts to send 
> same page
>        Dialogs: 3 (exchanges with remote device)
>          Dials: 0 (consecutive failed calls to destination)
>          Calls: 4 (total phone calls placed)
>          Pages: 0 (pages transmitted)
>       TotPages: 1 (total pages to transmit)
>       Attempts: 3 (attempts to send current page)
>         Dirnum: 0 (directory of next page to send)
>
>     ---- Documents submitted for transmission ----
>
>The following documents were submitted for transmission and are
>available on the server for reuse until they are automatically
>purged when this job is removed.  Documents may also be manually
>removed using the faxrm command; consult faxrm(1) for information.
>
>Filename                 Size Type
>docq/doc37.ps               0 PostScript


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null

Prev by Date: Re: [hylafax-users] Do I have to look for other solutions just because of a coverpage?
Next by Date: Re: [hylafax-users] remote Unspecified Transmit with EOP
Prev by thread: Re: [hylafax-users] Do I have to look for other solutions just because of a coverpage?
Next by thread: Re: [hylafax-users] remote Unspecified Transmit with EOP
Index(es):
- Main
- Thread

Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services