Re: [hylafax-users] [hylafax-devel] ATDT%s@ trick

["Bernd Proissl" <lists@proissl.de>]

This is from the german manual of a toshiba-laptop-build-in-modem:

@  Wait for period of silence. After dialing the number, the modem waits
   for a pause of 5 seconds. If this pause does not finish the modem reports
   NO ANSWER.


NO CARRIER  carrier lost  or
            carrier not recognized   or
            answering tone not recognized

NO ANSWER  dialed party did not pick up


this is the original text, maybe someone can do a better translation:

"Warten auf Ruhepause. Das Modem wartet nach dem Wählen der Nummer auf eine
fuenf Sekunden dauernde Pause. Tritt diese Pause nicht ein, sendet das Modem
den Ergebniscode NO ANSWER an den Anrufer"

Bernd

> -----Original Message-----
> From: hylafax-users-bounce@hylafax.org
> [mailto:hylafax-users-bounce@hylafax.org]On Behalf Of Dmitry Bely
> Sent: Tuesday, September 12, 2000 10:16 PM
> To: Steve Williams
> Cc: Dmitry Bely; hylafax-users@hylafax.org; hylafax-devel@hylafax.org
> Subject: Re: [hylafax-users] [hylafax-devel] ATDT%s@ trick
>
>
> Steve Williams <steve@genie96.com> writes:
>
> > OK, I found an old manual...
> >
> > The way it works is when dialing a fax machine, the remote fax machine
> > answers the phone and immediately starts generating connection tones.
> >
> > The @ says if you don't hear the tones, then there wasn't a fax machine
> > attached to the other end of the phone line, so ... report a "NO ANSWER"
> > result code ( from the MT2834BL Modem manual ... ) rather than
> a NO CARRIER,
> > which is typically returned on NOTHING answering the phone...
> >
> > If it does hear the tones, then everthing is fine.
>
> This behaviour IMHO is not acceptable. Many fax machines use "toll saver"
> feature and go off-hook only after several incoming rings.
> Calling such fax
> machine the modem will hear ringbacks and giveup with "NO ANSWER"
> ("BUSY"). So we will be unable to send any fax there ...
>
> > As to the different handling, I guess the code proves my memory
> completely
> > wrong!!
> >
> > I'm really swamped today, but a QUICK boo at the code ( thanks
> for including
> > it!! ) would seem to indicate that a "NO ANSWER" doesn't examine the
> > NoCarrierRetries counter..... HUM.... that seems weird...
> >
> > I'm not too sure what the code is trying to do, but hopefully
> this clears
> > up a LITTLE what the intent of it is...
>
> Hope to hear from you soon,
> Dmitry
>
>
>
>
> ____________________ HylaFAX(tm) Users Mailing List
> _______________________
>  To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org
> < /dev/null
>



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null