[hylafax-users] Problems sending Faxes

[Edwin Ramirez <ramirez@doc.mssm.edu>]

Hello,

    I have configured hylafax on a Linux RedHat 6.0 system.  I am able
to do everything as described in the setup document.  However, when
sending faxes the following error is reported:

        SEND FAILED: COMREC invalid command received/no DIS or DTC

Does anyone know what this is about? I've include the session trace at
the end.

Thanks,
Edwin S. Ramirez
---------------------------------------------------------------------------------------

Aug 25 09:27:31.63: [31772]: SESSION BEGIN 00000026 141544925
Aug 25 09:27:31.63: [31772]: SEND FAX: JOB 16 DEST 44925 COMMID 00000026

Aug 25 09:27:31.63: [31772]: MODEM set DTR OFF
Aug 25 09:27:31.63: [31772]: DELAY 2600 ms
Aug 25 09:27:34.23: [31772]: MODEM set DTR ON
Aug 25 09:27:34.23: [31772]: MODEM set baud rate: 19200 baud, input flow
XON/XOF
F, output flow XON/XOFF
Aug 25 09:27:34.23: [31772]: MODEM flush i/o
Aug 25 09:27:34.23: [31772]: <-- [15:ATE0V1Q0S0=0H0\r]
Aug 25 09:27:34.31: [31772]: --> [2:OK]
Aug 25 09:27:34.31: [31772]: <-- [21:ATS8=2S7=60&K4&D2&C1\r]
Aug 25 09:27:34.37: [31772]: --> [2:OK]
Aug 25 09:27:34.37: [31772]: <-- [12:AT+FCLASS=2\r]
Aug 25 09:27:34.42: [31772]: --> [2:OK]
Aug 25 09:27:34.42: [31772]: <-- [10:AT+FTBC=0\r]
Aug 25 09:27:34.47: [31772]: --> [2:OK]
Aug 25 09:27:34.47: [31772]: <-- [10:AT+FBOR=0\r]
Aug 25 09:27:34.52: [31772]: --> [2:OK]
Aug 25 09:27:34.52: [31772]: <-- [13:AT+FPHCTO=30\r]
Aug 25 09:27:34.57: [31772]: --> [2:OK]
Aug 25 09:27:34.57: [31772]: <-- [10:AT+FBUG=1\r]
Aug 25 09:27:34.62: [31772]: --> [5:ERROR]
Aug 25 09:27:34.62: [31772]: MODEM Command error
Aug 25 09:27:34.62: [31772]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r]
Aug 25 09:27:34.68: [31772]: --> [2:OK]
Aug 25 09:27:34.68: [31772]: <-- [5:ATM0\r]
Aug 25 09:27:34.73: [31772]: --> [2:OK]
Aug 25 09:27:34.73: [31772]: MODEM input buffering enabled
Aug 25 09:27:34.73: [31772]: <-- [12:AT+FCLASS=2\r]
Aug 25 09:27:34.88: [31772]: --> [2:OK]
Aug 25 09:27:34.88: [31772]: <-- [10:AT+FTBC=0\r]
Aug 25 09:27:35.03: [31772]: --> [2:OK]
Aug 25 09:27:35.03: [31772]: <-- [10:AT+FBOR=0\r]
Aug 25 09:27:35.18: [31772]: --> [2:OK]
Aug 25 09:27:35.18: [31772]: <-- [13:AT+FPHCTO=30\r]
Aug 25 09:27:35.33: [31772]: --> [2:OK]
Aug 25 09:27:35.33: [31772]: <-- [10:AT+FBUG=1\r]
Aug 25 09:27:35.48: [31772]: --> [5:ERROR]
Aug 25 09:27:35.48: [31772]: MODEM Command error
Aug 25 09:27:35.48: [31772]: <-- [24:AT+FDCC=1,5,0,2,0,0,0,0\r]
Aug 25 09:27:35.64: [31772]: --> [2:OK]
Aug 25 09:27:35.64: [31772]: <-- [23:AT+FLID="NothingSetup"\r]
Aug 25 09:27:35.80: [31772]: --> [2:OK]
Aug 25 09:27:35.80: [31772]: DIAL 44925
Aug 25 09:27:35.80: [31772]: <-- [11:ATDT44925@\r]
Aug 25 09:28:00.34: [31772]: --> [5:+FCON]
Aug 25 09:28:02.28: [31772]: --> [8:+FHNG:23]
Aug 25 09:28:02.28: [31772]: REMOTE HANGUP: COMREC invalid command
received/no D
IS or DTC (code 23)
Aug 25 09:28:02.28: [31772]: SEND FAILED: COMREC invalid command
received/no DIS
 or DTC
Aug 25 09:28:02.28: [31772]: <-- [5:ATH0\r]
Aug 25 09:28:03.60: [31772]: --> [2:OK]
Aug 25 09:28:03.60: [31772]: MODEM set DTR OFF
Aug 25 09:28:03.60: [31772]: SESSION END




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null