Hylafax Mailing List Archives

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: [hylafax-users] Hylafax Inst problems



Just out of curiosity, why not use one of the precompiled binaries?

>>>>> On Wed, 16 Aug 2000, "Nick" == Nick Rout wrote:

  Nick> Yes I know they are not the best places, I wanted to give the guy a
  Nick> reference to a hylafax rpm that I knew worked :-)

Thanks for helping out Nick!

Aside from the length of the URL, was there anything in particular you
didn't like about the original (and authoritative) source location? ;-)

ftp://ftp.hylafax.org/hylafax/hylafax-4.1/binary/linux/redhat/RPMS/i386/hyla
fax-4.1beta2-5rh6.i386.rpm

-d





____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null
-----Original Message-----
From: Surya N. Viriyala [mailto:sviriyala@dllr.state.md.us]
Sent: Thursday, August 24, 2000 2:45 PM
To: hylafax users
Subject: [hylafax-users] Hylafax Inst problems


Hello All,

Newbie here. Trying to install and use hylafax. Cant compile one.
My config:

P-II 266 MHz, 64 MB RAM , 4GB HDD, 3com net card & US Robotics Sportstar
33.6
Modem
RH linux 6.1 Kernel 2.2.16-3
tiff 3.4
Ghostscript 5.10
Ghostview 3.5.8
gcc 2.91
libg++ 2.72

Except for the fact that I upgraded the kernel from 2.2.12-20 to 2.2.16-3 I
didnt have to do anything. All the
above mentioned were installed during my Redhat installation.

Now to compile I followed what was said in the Readme file that came along
with
the source.
# ./configure      -------------> OK no errors
# make

> make[1]: Entering directory
`/home/downloads/hylafax/source/hylafax-4.1beta2'
> = zlib
> make[2]: Entering directory
`/home/downloads/hylafax/source/hylafax-4.1beta2/zl'
> /usr/bin/gcc -O   -c gzio.c -o gzio.o
> In file included from /usr/include/errno.h:36,
>                  from zutil.h:26,
>                  from gzio.c:12:
> /usr/include/bits/errno.h:25: linux/errno.h: No such file or directory
> make[2]: *** [gzio.o] Error 1
> make[2]: Leaving directory
`/home/downloads/hylafax/source/hylafax-4.1beta2/zli'
> make[1]: *** [dirs] Error 2
> make[1]: Leaving directory
`/home/downloads/hylafax/source/hylafax-4.1beta2'
> make: *** [default] Error 2
> [root@faxserver hylafax-4.1beta2]#
>

I have checked that the above mentioned file exists in my system. DO I have
to
setup any environment before
I can compile hylafax. I thought configure script did just that.

Can someone help me please ??

Thanks
suri.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null


____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null



Home
Report any problems to webmaster@hylafax.org

HylaFAX is a trademark of Silicon Graphics Corporation.
Internet connectivity for hylafax.org is provided by:
VirtuALL Private Host Services