Re: [hylafax-users] Problem sending empty pages (elsa 56k internet)

[Dmitry Bely <dbely@mail.ru>]

Lee Howard <faxguy@deanox.com> writes:

> >I am having trouble with the configuration of an elsa 56k internet
> >modem.
> ....
> >
> >Here is my modem log:
> >
> ....
> >Aug 21 19:14:16.78: [  854]: <-- [15:AT+FNR=1,1,1,1\r]
> >Aug 21 19:14:16.83: [  854]: --> [2:OK]
> >Aug 21 19:14:16.83: [  854]: <-- [7:AT+FAP\r]
> >Aug 21 19:14:16.87: [  854]: --> [5:ERROR]
> >Aug 21 19:14:16.87: [  854]: MODEM Command error
> 
> This error isn't good.  Your config file probably isn't right.

No. This is Class2APCmd with "AT+FAP" default. This is wrong and should be
corrected in sources, although seems not to be very dangerous.

> ....
> >Aug 21 19:14:17.85: [  854]: <-- [7:AT+FAP\r]
> >Aug 21 19:14:17.99: [  854]: --> [5:ERROR]
> >Aug 21 19:14:17.99: [  854]: MODEM Command error
> 
> Here it is again.  You'll want to correct this in the config file, although
> I don't see any part of your config file where it's giving an AT+FAP
> command listed.  That's odd.

His config has nothing to do with this issue.

> Read man config, get your AT+F and AT command set,
                                     ^^^^^^^^^^^^^^
Most of them have nothing to do with the fax mode operation (except maybe
ATZ & ATD :-))

> and rework your config file.

Have you read Class* specs yourself? They are not very obvious for the
beginner and require T.30 understanding...

> That's about as much help as I can be unless someone else is using
> your model and firmware also and can give you a copy of their config.

Hope to hear from you soon,
Dmitry




____________________ HylaFAX(tm) Users Mailing List _______________________
 To unsub: mail -s unsubscribe hylafax-users-request@hylafax.org < /dev/null